No video
How to save a bad paint job! Diy Autobody, orange peel, colorsand
Рет қаралды 76,014
Күн бұрынHow to save a bad paint job! Diy Autobody. orange peel, colorsand. How to color sand properly and remove dry spray, orange peel and dirt. Making it look better then a factory finish.
Thanks for watching be sure to Like and subscribe!
Amazon Associate I earn a small commission (at no additional cost to you) from qualified purchases. I will not recommend any product that I do not use personally.
Amazon links to products i use:
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Perfect-It 3M 36058 EX Rubbing Compound - 8 fl. oz.
by 3M
amzn.to/2PVJ5PA
3M Trizact Performance Sandpaper, 03064, 3-2/3 in x 9 in, 3000 grit
amzn.to/3kHg9Jc
3M Auto Wet Or Dry Sandpaper 3 2/3 in x 9 in, 1000, 1500, 2000, 2500 Assorted Grit Pack, 5 Sheets
by 3M
amzn.to/3h1Dhjx
Touch Up Paint Brushes,Auto Cleaning Automobile Washer Paint Touch-up Car Applicator Stick Disposable for Automotive Paint Touch Up&Car Detailing-100pcs
amzn.to/341rn5l
U-Pol 2892 High Solids Urethane (4.4 VOC) High Solids Spot Repair Urethane Clearcoat Kit with Standard (65 to 90ºF) Temperature Hardener
by U-Pol Products
amzn.to/311CVTc
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
@powercycle2369 Жыл бұрын
Most important thing to me is you understand how we feel and I appreciate your comforting personality. Thank you for teaching us this. Made my day.
@GarageNoise Жыл бұрын
You are so welcome! I appreciate your comment and support!
@andrewhigdon8346 Жыл бұрын
You rock. I’m dealing with the same thing. You don’t need the background music. No one, ever, says, man I wish that how-to video had music in it. Never happened. As a creator, you want it to be more attractive in every aspect. As a sound engineer, who is literally addicted to music, I’ll be the first to tell you how golden silence can be. Not so much silence itself, just less distraction from your words and even the content when you aren’t speaking
@GarageNoise Жыл бұрын
I've pretty much come to that conclusion about the music as well. I appreciate the comment and support!
@ginfizz20 11 ай бұрын
Thanks for the info and taking the time to put it here. I'm 85 yr. old and haven't painted a car in 35 years. Got a truck that needs some cosmetic work, so been watching u-tube to learn the changes that have been developed---- and WOW!!! 3000 grit paper!!! I once used 600 and thought it cut about as good as a piece of "waxed paper"
@GarageNoise 11 ай бұрын
It's a different game today a lot of great tools and materials. Appreciate the comment and!
@olajuwondotson4333 2 жыл бұрын
Now I don't feel as bad 😆 thanks Chris got one I gotta fix in the morning
@piano4014 Жыл бұрын
Great helpful vid and no irritating music..thank you!
@GarageNoise 11 ай бұрын
Glad you liked it!
@BloodSweatnBass 2 жыл бұрын
This is exactly what I needed and couldn’t have come at a better time. I really owe ya a beer! ‘Cause this is awesome. Thanks for sharing.
@GarageNoise 2 жыл бұрын
Cool brother, happy it helped! Thanks for watching and commenting
@kylet3390 3 жыл бұрын
This is EXACTLY what I've looked for for years! Thank you so much!!!
@GarageNoise 3 жыл бұрын
Great! If that one helped this one might as well updated version. kzfaq.info/get/bejne/htR6pcdmysfIdGg.html. Thanks for the comment!
@KrC_Games 2 ай бұрын
@@GarageNoise yoo, can i do this on only paint? without clear coat
@KrC_Games 2 ай бұрын
or you doing here without clear too??
@kylet3390 2 ай бұрын
@@KrC_Games That’s called single stage paint; a lot of older cars used it. I’d look into that
@KrC_Games 2 ай бұрын
@@kylet3390 i mean i did not apllied clear coat yet, cause i used spray gun first time ever and did a mistake by over spraying, but it does looks decent, so i think i can use this method that's in this video?
@DavidR_192 Жыл бұрын
I painted the drivers door on my Mercedes SLK yesterday and the result was disappointing. However, it's mainly just because the clear coat I used was so underwhelming and lacking in shine. Having seen what you achieved with the two stage wet sand and then good polish, I am 100% confident I can get a much better result, when I re-address the job tomorrow. Thanks so much!
@waltermazur4348 2 жыл бұрын
Great video. Will help me a lot fixing the crappy spray job I just applied. Thank you for sharing.
@freddiellewellyn5830 2 жыл бұрын
Excellent video Sir! Been struggling with my old Bentley for ages and this is the answer! Thank you
@GarageNoise 2 жыл бұрын
Thanks for watching and be sure to subscribe!
@jackprycee6977 4 жыл бұрын
I’m thinking you have helped me save a base coat clear coat paint job and yes it was my first one. Amazing info I can’t wait to try. Thanks so much and this was great 👍
@GarageNoise 4 жыл бұрын
Thanks, I appreciate it! If your doing some more painting check out my other videos and don't forget to subscribe.
@robertchaffee5662 3 жыл бұрын
Wow! Great video! Nice job ! Just the video I've been searching for! Tks man !
@Dwigt_Rortugal 9 ай бұрын
Thanks! I truly appreciate the time you took to make this.
@martinmacchicanto4564 4 жыл бұрын
Dude. THANKS. Just a lot of big thanks to you. This videos help a lot
@GarageNoise 4 жыл бұрын
Awesome! Happy to hear this helped! Don't forget to subscribe it will help the channel!
@PadmaDorjee 2 жыл бұрын
Brilliant video once again, thank you! And you are so correct, no other painting KZfaqr would be as honest about mistakes like you are. That makes you so much better in my eyes.
@GarageNoise 2 жыл бұрын
Mistakes are a blessing, it's the best opportunity learn and grow.
@brettwardle4723 2 жыл бұрын
Your a life saver mate.
@kuntz144 2 жыл бұрын
This is what I need a little bit long on explaining stuff more than once. But it was worth it thanks
@Go69 Жыл бұрын
I am LOVING this video! Just what I need to fix my "textured" base coat...
@GarageNoise Жыл бұрын
Thank's ! I'm happy it was helpful. I appreciate the comment and support.
@1supratech 3 жыл бұрын
Thank you for a great video! That was very informative.
@GarageNoise 3 жыл бұрын
Thanks for the comment!
@debrakaiser200 3 жыл бұрын
Excellent video....you are great at explaining everything. Much appreciated....I'm going to try it on a bad paint job that came with my 67 beetle.
@GarageNoise 3 жыл бұрын
Thank you so much, I hope it does the trick!
@bendafixer4542 Жыл бұрын
We all have had less than desirable results. Great video showing this, and what to do to repair it.
@GarageNoise Жыл бұрын
Appreciate the support!
@bertbalderas6714 4 жыл бұрын
Thank you for the video great work surely helping me out today!
@GarageNoise 4 жыл бұрын
Your welcome and thanks for commenting !
@lookinatcha5279 4 жыл бұрын
My paint job was awesome. But then a fly flew in my work and trying to get it out opened a can of worms.
@9o5east Жыл бұрын
Awesome video really helpful!
@BearBudgetTurbine 2 жыл бұрын
I just had some panels come out like that. I was using high solid clear and a new gun I was trying instead of my trusty W400(which I know how to set up for clear and it doesn't let me down). Bur the dust specs...always. no matter how much I clean, tack, wet floor.... But bad orange peel, texture, bleah! That does not make me happy! I ended up sanding the panels and flow coating with the W400. Still gotta denib. Still gonna buff. But what a difference going back to my normal gun. I need to stick with what works. This is a good video, putting a problem filled job out there. Things happen and this shows it can happen to anyone and its not the end of the world👍
@user-ti9hc6pd4e Ай бұрын
lol! This happened to me yesterday! First time to paint a car and boy it was looking great and I screwed up! It was so hot here in Dallas a river of sweat poured out of my paint suit all over my fresh coat of clear coat. I was 😡😡😡😡
@jeffevon7789 2 жыл бұрын
Thx just what I was looking for well done look forward to more tips
@GarageNoise 2 жыл бұрын
Thanks brother!
@prakashkumar-dz1qb 3 жыл бұрын
Great job
@AntonioMartinez-qj7is 3 жыл бұрын
Great job my friend
@paulmc9314 2 жыл бұрын
Gd man just did a bumper and the wind appeared from no where as soon as I mixed clear lol.. resulting in this same finish was pretty imbarrased. Will be doing exactly this to hopefully save it :) it's all about learning and improving.. thanks dude just earnt a new sub.
@GarageNoise 2 жыл бұрын
Welcome to the channel! Appreciate the support there's always an opportunity for hobbiest or pro to build your skill!
@stevenlau9009 Жыл бұрын
Brother I need to do the same thing to my truck. Orange peel all over. It gives me some me confidence now watching ur video.
@tbryan1697 4 ай бұрын
Very helpful! Thanks for sharing the embarrassing stuff so we can learn.
@GarageNoise 4 ай бұрын
My pleasure!
@bahimbo2257 2 жыл бұрын
Perfect result. . thanks for the video and explanation, we want more 👍👍👍
@GarageNoise 2 жыл бұрын
As long as your watching I'll keep them coming!
@charredskeleton 7 ай бұрын
Thanks for sharing mistakes too. To show humanity is to give humanity!!
@GarageNoise 2 ай бұрын
Absolutely!
@mikeergin6612 2 жыл бұрын
Exellent job....
@carlos020586 Жыл бұрын
Thanks for all the good tips 👍
@GarageNoise Жыл бұрын
Yw 👍
@MsMilios 4 жыл бұрын
Thank you so much .
@lookinatcha5279 4 жыл бұрын
I painted the hood with rattle cans. The fender. Came out beautifully. The hood to until I try to get a fly out of my job.
@taylorwaylor87 Жыл бұрын
Best auto paint channel around!
@GarageNoise Жыл бұрын
Thank's brother! Appreciate the support!
@MrTillie 3 жыл бұрын
Now im ready to colour sand and buff. Thanks
@GarageNoise 3 жыл бұрын
Thanks for watching!
@DavidSmith-cb9yo 2 жыл бұрын
Just found your channel and subscribed, great job and information. Goes back to the old saying, "the difference between a journeyman and a craftsman is a journey knows how to fix his mistakes, a craftsman knows how to fix them before anyone sees them. Point is stuff happens all the time, knowing how to fix the problem is what makes one a pro, and in my humble opinion, that you are my man! Thanks for the great video, please keep them coming.
@GarageNoise 2 жыл бұрын
Your totally right half the battle is knowing how to overcome obstacles. Then once you can overcome them you quickly learn how to avoid them! Welcome to the channel! I appreciate the support!
@DavidSmith-cb9yo 2 жыл бұрын
@@GarageNoise Thanks for the welcome, forgot to hit the like button and notification bell, just clicked and rung that bell. Hope that helps your YT algorithms.
@GarageNoise 2 жыл бұрын
@@DavidSmith-cb9yo Thank's brother!
@wheelndealmotorsmaine1used956 4 жыл бұрын
awesome!
@MrSu-xd3kt 4 жыл бұрын
Thanks for the video. 👍
@GarageNoise 4 жыл бұрын
Thanks, for comment!
@wastedcentury1805 11 ай бұрын
Fantastic. It's even better for me because I have the same problem with the same color
@GarageNoise 11 ай бұрын
👍
@sand0077 2 жыл бұрын
Nice repair of the repair!
@renecenteno5921 2 жыл бұрын
Turned out real nice Chris, I think it’s cool that you’re showing the jobs that don’t come out clean and how to fix the problem. 👍🏽
@shimmy6039 Жыл бұрын
Sir thanks for the reality video. It helped so much.
@GarageNoise Жыл бұрын
Always welcome
@audwinmiller6351 3 жыл бұрын
Great job I learn something 👍
@GarageNoise 3 жыл бұрын
Thanks brother!
@forbesy8568 Жыл бұрын
Very helpful thank you
@GarageNoise Жыл бұрын
You're welcome!
@troyadams1076 10 ай бұрын
Thanks so much that will help me alot 😊 thanks brother
@GarageNoise 10 ай бұрын
Happy to help! Appreciate the comment and support!
@PhillipHall01 2 жыл бұрын
Thanks for the video..
@GarageNoise 2 жыл бұрын
You welcome and thank's for the support!
@PhillipHall01 2 жыл бұрын
@@GarageNoise Yea Sir!
@charlesranscheart6738 Жыл бұрын
You did a real good job on now that what you after I watched your video I ain't nobody working 25-30 years how long by work working in the backyard plus out of the drywall hanger and finisher for 35 years anybody can do that can you paint it
@GarageNoise Жыл бұрын
👍
@air-eck6188 Жыл бұрын
How many coats of clear coat did you apply before the sanding & polishing? Superb job & instructions…thanks for letting me know how to save a paint job that I thought may have needed repainting…you saved me lots of money my & hours!! Thank you!
@GarageNoise Жыл бұрын
It was two coats of clear. Your welcome appreciate the support!
@bobbydoll7204 8 ай бұрын
nice job
@GarageNoise 8 ай бұрын
Thanks!
@nathandean66 5 ай бұрын
Thanks I had a great look from the clear but the plastic touched it ,I just started over but now I know
@rinzler9775 3 ай бұрын
Will try this - got hit with the dreaded orange peel monster.
@GarageNoise 3 ай бұрын
It happens
@husky1232 3 жыл бұрын
This is good to see now that is orange Peele, your right about anyone not showing to much orange peel my ? Is with that amount of orange peel do you think you could of used a 1000 grit depending on how much clear you put on the other thing was that was a big jump from 1500 to 3000 didnt know thank you for this video
@GarageNoise 3 жыл бұрын
You could start with1000 or 1200 . I start now with 2000 then move to 3000.
@Random.Adventures. 8 ай бұрын
Wow great job thanks for sharing. Cause most f us have these problems but no one posts it. Will this same technique work with ingle stage paint as well with same instructions? thanks
@GarageNoise 2 ай бұрын
Not on metallics, maybe a solid color single stage, but it will destort metallics without a clearcoat to sand.
@philipmesi9009 2 жыл бұрын
hello i tried spray painting my quarter panel on my corolla the outside temperature was cold and the spray paint was horrible i may try rhis ty ..philip.
@relaxgaming8872 4 ай бұрын
Do you sand it after the clear coat or before it when u see the dust and orange peel?
@exquisitehomes Жыл бұрын
This Video is awesome. Thanks for sharing. Would this work on metallic finishes as well?
@GarageNoise Жыл бұрын
Yes as long as it's base coat / clearcoat and not single stage.
@Keepin-it-wheel101 4 жыл бұрын
I am glad I am not the only one...
@GarageNoise 4 жыл бұрын
It happens!
@DIYDanCars 5 жыл бұрын
Nice work! What a difference!
@JohnBaileyDarke 6 ай бұрын
Great detailed vided,. Could you comment on what polishing compound you use. Thanks in advance...
@GarageNoise 6 ай бұрын
I've really become a big fan of CSI compound. They use less filler so when it's buffed it's buffed it doesn't just hide those fine scratches.
@rogeryanez8107 2 жыл бұрын
Excellent video brother. I do have question, How do you fix bumpy paint jobs? Much appreciated and blessings from Los Angeles ✌
@GarageNoise 2 жыл бұрын
By bumpy do you mean trash ot orange peel or something else? If you have clear you should be able to wet sand and buff it out.
@michellehatfield1633 4 жыл бұрын
Did your paint have a metal flake to it? You're right the reflection did make it kind of hard to see the paint it came out so shiny and smooth. And if you mentioned the type of paint job you did in the video, I apologize, I missed it. Thanks for sharing your way of cleaning up the paint.
@GarageNoise 4 жыл бұрын
Yes, my paint had metal flake thanks for the comment.
@litoa3897 4 жыл бұрын
Wow, incredible paint work‼️ I took my SUV to shop and he didn’t do a good paint job on my entire ‘19 highlander. I don’t have that orange peel, just on couple small areas. it’s missing that glossy/brightness look like yours. after watching your video now I have high HOPE.am just a beginner but can definitely follow your video. this will save me lots of money!!THANK YOU 🙏🏼 🙏🏼
@GarageNoise 4 жыл бұрын
Thanks for the comment! Happy to help, let me know if you have a question along the way. Remember you can sand thru the clear. If your orange peel isn't to bad i would recommend starting with 2000 grit wet sand paper.
@babarkx 4 жыл бұрын
Thanks a lot . This helps! Planning to do the same this weekend. Just a question... My car door paint is a bit dark from the stock paint (30 percentage darker) . Can I make it dull by using sand paper (1500 grid)? Will this work ? Appreciate your expertise feedback. Thanks.
@GarageNoise 4 жыл бұрын
Unfortunately no , color sanding or wet sanding will not change the color of the paint. The way to fix this would be to blend into the adjacent panels with color and clear those panels. Thanks for comment!
@activeway9843 2 жыл бұрын
What compound you use at the end to buff it out here in England we have T cut can I use that
@danilb8166 2 жыл бұрын
Awesome video thank you! Would the process be the same for painted plastic ABS?
@GarageNoise 2 жыл бұрын
Yes it would, thanks for the support!
@AshishSharma-cs2gg 3 жыл бұрын
Hey, Great job. After buffing, should we put clear coat or it is fine to leave after this stage?
@GarageNoise 3 жыл бұрын
Your done after you buff it
@chuck5743 9 ай бұрын
I had the same problem and I did it like you should. But instead of a nice shine it all looks dull no matter how how I polish it idk why
@darrenthomas7312 4 жыл бұрын
Going to try and save my Focus bumper I've painted myself. The orange peel I have is real bad. Great video, I don't feel ashamed anymore
@GarageNoise 4 жыл бұрын
It happens to the best of us. “ Many times what we perceive as an error or failure is actually a gift. And eventually we find that lessons learned from that discouraging experience prove to be of great worth. Richelle E.
@felipin.el.detailer 2 жыл бұрын
Dude, that’s amazing! I hava a question tho. My car was repainted like 2 years ago and now I think it’s time to make it shine since it has a looot of orange peel. I’d do the sanding proccess and then use a compound with a cutting disc? Or a polishing compound with a polishing disc would be enough? Thanks in advance
@GarageNoise 2 жыл бұрын
If you finish sanding with 3000 or 5000 then you should be able to use a polish with a mild cut rating along with a polishing foam pad.
@felipin.el.detailer 2 жыл бұрын
@@GarageNoise thanks! would you recommend skipping the 5000 sanding stage and going with a cutting disc with compound instead? Or that final sanding step is completely neccesary to achieve that glossy finish?
@aaronhernandez5239 4 жыл бұрын
I need your help! I painted my car matt black and the left side is perfect but on the right the door looks brighter that the rear panel but matches perfect with the front
@GarageNoise 4 жыл бұрын
Ok, some matte paint has different levels of sheen depending on how you mix it. Meaning the more catalyst you add the glossier the sheen. What brand paint did you use? The nice thing with matte black its verry easy to re shoot an side or panel.is there anything you did differently from side to side?
@Sia-pu9rv 3 жыл бұрын
Wow
@grtexas4741 10 ай бұрын
Will this work on a single stage job also?
@AJJamal-pp3qe 4 жыл бұрын
I wish my paint job did look that good. I had tape marks, the paint was too dark and you still see little putty marks. I gave myself a D-. I will not give up. I will try again today.
@GarageNoise 4 жыл бұрын
Yeah don't give up! Preperation is the key. I have some other videos that might help you on your next attempt. Feel free to message me if have questions.
@Daniel-ew9gx 4 жыл бұрын
Awsome! I just painted my car mattblack and got some rough parts and orange peel, i asume i should wetsand down before putting of the clearcoat (mattcoat), is there anything that seperates sanding down matt and the finish you just did here? Also, is there cleatcoat on the side you fixed or is it just the paint? Thanks again for a video that gave me faith in what i just did!
@GarageNoise 4 жыл бұрын
If you want your paint a matte finish meaning you don't want the finished product to have gloss . If that's the case you cannot wet sand and or buff it. It needs to be sanded smooth and re-sprayed . I hope this helps if you have any other questions let me know thanks for the comment don't forget to subscribe!
@Daniel-ew9gx 4 жыл бұрын
@@GarageNoise Hi and thank you so much for a quick response. I see, so since i want the matte finish, i can not sand or buff, i need to sand it down and repaint it, I guess i don't put a matte coat over it after that aswell? Subscribed!
@GarageNoise 4 жыл бұрын
Yes you are correct that if you want it matte you can't sand it and buff because that will give it a shine in the area you buff.
@Daniel-ew9gx 4 жыл бұрын
@@GarageNoise thank you, so, so much! You just saved me a lot of time!
@carrytrainer.editor3321 Жыл бұрын
Great video. I'm surprised you started with 1500 grit over 1200 or a 1000. Is that because it was still soft? I'm doing my first paint job with POR15 2k Urethane... I got the temp too hot on the first coat and it was drying too fast without leveling out. It's bit worse than yours but I'm feeling confident about fixing it with an aggressive cut and buff.
@GarageNoise Жыл бұрын
Just a preference, I like to keep scatches as fine as possible.
@mingzhu7049 2 жыл бұрын
Nice work! Do I sand after applying both the colour and clear coat or just the colour coat?
@GarageNoise 2 жыл бұрын
After the clearcoat only
@mingzhu7049 2 жыл бұрын
@@GarageNoise Thank mate. Will try it out.
@christopher5024 4 ай бұрын
What color finishing pad do you recommend to use After the 5000 sandpaper. What brand?
@GarageNoise 4 ай бұрын
Use the grey/black ,I don't have a particular brand that I use.
@gfundaddy 2 жыл бұрын
My paint job has a loott of orange peel: like your red truck. So you sanded all the way to 5000, then used the black pad with Wizard's compound? Just trying to get that sequence right. I think Ill try that. Thanks again!
@GarageNoise 2 жыл бұрын
Yes that's right
@uncleknife9887 Жыл бұрын
So if I shot a rough base coat, is it better to go ahead & shoot clear over that & then use your method. Or can I use your method on a base coat as well? God Bless you even if you don't answer, I have a ton of appreciation for You & all the GN Educational Videos. Thank You!
@GarageNoise Жыл бұрын
I would clear and correct it after. Appreciate your comment and support!
@uncleknife9887 Жыл бұрын
@@GarageNoise Your generosity & kindness will not go unpaid Chris. Thank's for being so cool & of course, thanks for your willingness to share the secrets of your very difficult craft. Even after studying for weeks it's so easy to totally blow it. I've been spraying houses my whole life & I still got a damn orange peel on my truck base coat....frustrating but fixable, thanks to you.
@GarageNoise Жыл бұрын
@@uncleknife9887 👊
@jamesmarques7245 Жыл бұрын
Does the clear die back, because you buffed it too soon? How many coats did you give it?? Three good coats to sand the clear coat, to give it a moderate sand and buff it a second time??
@GarageNoise Жыл бұрын
No buffing has no effect on die back. Die back has application or the clear coat. Two good coats is sufficient to wet sand and buff. This had two. You should oly have to sand it once in this process. Hope this helps,appreciate the support!
@anthonywhittaker4321 2 жыл бұрын
Just a quick question. When you transitioned to your DA for the finer grits, did you use water or dry sand?
@GarageNoise 2 жыл бұрын
I basically dry sand everything. The only time I wet sand is when I cutt and buff clear. That is just what I've found works best for me.
@mememetal666 3 жыл бұрын
Should i start with a 1500 on an older paint job that has some orange peel and bird poop stains or should i use a 3000?
@GarageNoise 3 жыл бұрын
Older paint i would start with 2000 then 3000. If you start with 3000 it won't do much to help with scratch removal. You could try 1500 on a small area be careful tho it will be easier to sand thru a paint thats older.
@nowirehangers2815 4 жыл бұрын
Hoping i can sand mine back because it looks crap
@MaxMinstats Жыл бұрын
Can anything like this be done with a single stage paint which came out the same way? Can it be made smooth then clear coated possibly if not?
@GarageNoise Жыл бұрын
Only if it's a solid color with no metallics otherwise it will effect the orientation of the metallics .
@MaxMinstats Жыл бұрын
@@GarageNoise Yes its a single color gloss black with no particulates or flake in it. Thanks for the feedback!
@markchimmy Жыл бұрын
Just wondering wouldn't a 3000 grit sand paper be good enough to buff after? Thank you
@GarageNoise Жыл бұрын
Absolutely, even the 2000 could be buffed. I really just like to limit the buffing time with a finer scratch. Appreciate the comment and support!
@dnup9392 Жыл бұрын
Hello . What happens if the base has orange peel texture and clear has put on it? Someone painted my car and it has orange peel. I dont know if the base also has orange peel.
@GarageNoise Жыл бұрын
It will wet sand out with the clear.
@gevelegian Жыл бұрын
If I paint my car outside where there's plenty of debris, should I wet sand the base coats as well or just apply all the coats and 2 clear coats and sand that?
@GarageNoise Жыл бұрын
I wouldn't just wet sand the basecoat. I would inspect the base coat between coats if you see a spec of dust let it dry and then dry sand the dust out with 600 and apply another coat of base then clear when it's covered and clean. Hope this helps appreciate the comment and support!
@gevelegian Жыл бұрын
@@GarageNoise thank you so much for the reply, I was thinking that if I respray the base after sanding, I'll just get the same result with dust specs and who knows what else. Can I just do two layers of base and sand it with 1500 to 3000 to get rid of the contaminants and just spray clear coat over a sanded 3000 base? I'll have to be very creative since I am looking to paint it white and I'm thinking of fixing the defects by polishing alot. Thank you so much for the reply, awesome video.
@khalid95eG 2 жыл бұрын
What’s the key to spraying with minimal orange peel seems like no matter what I do it comes out textured
@GarageNoise 2 жыл бұрын
Getting glass like clear comes down to air pressure in relation to paint volume. So if your getting orange peel , you have too little air pressure for the amout of paint that's coming out of the gun. Other factors can effect this like what temperature your painting in or is your compressor producing enough air. Check out this video hope it help! Thanks for supporting the channel!
@billbliss2500 Жыл бұрын
My question is: did you paint and then Clear Coat and then start this Project? I can’t tell if the paint job was bad or was the Clear Coat bad ?
@GarageNoise Жыл бұрын
It was the clear. Heavy orange peel.
@gfundaddy 2 жыл бұрын
What pad and compound did you use after the 5000? Thanks
@GarageNoise 2 жыл бұрын
I use a soft foam pad. The soft is typically the black. 3m pad but if you buffing 5000 the brand doesn't really matter. I've switched over to wizards finish cut. I like it, doesn't leave so much filler behind . Good question,thanks for watching brother! amzn.to/3b9rSzO
@foxtrot68 4 ай бұрын
It definitely helped ME out !!😊
@GarageNoise 2 ай бұрын
Glad it helped!
@josephchamberlain9129 Жыл бұрын
How do you know if you sand through the clear coat?
@GarageNoise Жыл бұрын
You'll see a discoloration in that spot.
@kwskater223 3 жыл бұрын
I painted my car flat black with with spray cans and it turned out okay. It all laid down smooth and when I wet sanded it with 2000 grit and it made it smoother but there’s streaks all over the car. I know spray painting won’t be perfect but I’m on a budget and did it on the street outside of my house. Is it normal for it to have the streaks? It looks like the front door did on the truck you were painting but mine has obvious streaks of every motion when I sanded. Do I just need to sand it down with 5k on an orbital sander to make it 1 solid color?
@GarageNoise 3 жыл бұрын
First thing i need to know is what kind of paint you used? You said flat black, flat black is not designed to be wet sanded and buffed. Buffing shines it up. Thats most likely the problem your having. If you painted with an urethane enamel that can be wet sanded and polished.
@kwskater223 3 жыл бұрын
@@GarageNoise I used rust oleum acrylic enamel. It said on the website it was for automotive. I tried wiping it down with clean rags and acetone before. About 30 minutes Ago I washed it with dawn soap and it got rid of the streaks but still looks a little chalky. At this point I don’t mind having a gloss on it, I just want it to look decent.
@GarageNoise 3 жыл бұрын
It looks chalky because it's flat black . If it was gloss black it wouldn't be chalky looking. Flat black looks good but know this , its not made to be polished. The only way to get rid of the calky look would be to respray it. Then don't wet sand and buff it. Sorry this is probably not what you want to hear but i hope this helps.
@kwskater223 3 жыл бұрын
@@GarageNoise it’s exactly what I needed to hear, thank you. I think I’m going to just clear coat it.
@GarageNoise 3 жыл бұрын
Before you clear apply another coat of base or the milky look will be seen under the clear.
@scottpelletier5165 9 ай бұрын
How do you remove orange peel on just base coat ? Thanks
@GarageNoise 8 ай бұрын
Some peel in base coat can be sanded out after clear coat. If it's real bad 600 and apply more base
@adnansgarage 4 жыл бұрын
My paint exactly looks like this, even base coat was dry and looked like this but i did put clear coat on top of it and now it exactly looks like this problem. Will your solution work even if the base coat looked like orange peel? Question ??
@GarageNoise 4 жыл бұрын
Yes, if you clear over rough or orange peel base coat you can wet sand the clear out like glass. You should however apply an extra coat of clear ,so at least 3 coats of clear . This will give you more clear to work with when color sanding.
@GarageNoise 4 жыл бұрын
Another side note, make sure your using the proper reducer for the temp your spaying in. This should eliminate dry spay. Also the clear catalyst needs to be for right temp your sprayin in. this is very important .
@adnansgarage 4 жыл бұрын
@@GarageNoise Thanks for the answer. That means wet sand the existing clear, apply new clear coats and then buff with machine?
@adnansgarage 4 жыл бұрын
@@GarageNoise Unfortunately I am using spray paint cans from local store called Biltema here in Sweden. Temperature in my balcony is around 20 degrees Centigrade with normal humidity and no disturbance from wind
@GarageNoise 4 жыл бұрын
@@adnansgarage ok, you have already applied the paint? Is that correct? If you have, go ahead and clear it use a 2k clear in a can if you are able. Then let it dry for 15 min and apply another coat repeat for a third coat. Then i would let it dry at least 24 hours. Then you can color sand. I have a video how to pant your fender watching this may help.