This video shows you how to reactivate your stock on the PPS-43C pistol, when you have turned it into an SBR.
Пікірлер: 56
@gtwoc3563 жыл бұрын
Thank you for this. I have been searching for the details of removing/replacing the pin for quite some time now. Just by chance I found this 3 days after you uploaded it. This confirms this is an easy enough project to get the SBR process moving.
@GearyGunderson3 жыл бұрын
I'm glad it helped push you to try it yourself. I took it out shooting and it's fun as an SBR.
@justanothergunnerd8128 Жыл бұрын
Yes - thank you! Some of us folks have been thinking about this process and deciding on whether or not it's worth the hassle. Great video!
@GearyGunderson Жыл бұрын
I'm happy to hear it helped!
@donaldoehl7690 Жыл бұрын
I've done a few of these and found it quite simple, at least for me since I have a TIG welder. I figured it out by noticing that the button wasn't allowed to be depressed enough to unlock the stock. Just separate button/pin from crossbar latch and adjust until latch is depressed enough allow stock to deploy. Then weld latch back onto button. Don't remember ever drill out that hole for button, though. Honestly, I can't believe the ATF allows these to be sold this way after I did my first one. I really should get one of these for myself to SBR cuz I think they are neat handy little guns and I like subguns too!
@FUBBA8 ай бұрын
Normal people: How to SBR PPS-43C Me: Long boi carbine
@loreng74332 жыл бұрын
There's another KZfaqr that has a walkthrough like this and machines new push pins for the conversion. $50 shipped for a brand new in spec pin as opposed to buying a worthless cut up parts kits simply for one pin.
@lostattheoffice2 жыл бұрын
can you point me in the right direction to find this?
@loreng7433 Жыл бұрын
@Missagan I can't remember the link off hand, but if you type in 'PPS43 stock conversion' you'll find him near the top. He has an Ebay account to buy it in his description
@limitlessbydesign Жыл бұрын
You still have to source a spring for the pin. The parts kit is worth it in my opinion, you get the more authentic trigger, sling, extra mags, mag pouch, spare bolt, guide spring, cleaning rod, and extra stock for about 70 bucks more. Three extra mags, trigger and sling were worth it to me alone. The guy who makes the pins is username Tula1940 LB
@mikenilles755 ай бұрын
Where you get that parts kit? Havent found one with the parts u mentioned for 80 on google
@Florida_man4204 ай бұрын
@@limitlessbydesignyou can use ar15 magazine catch spring for it
@ReadinessReviews3 жыл бұрын
Great job on this project dude. I'd love to do something like this some day. I need more tools first though lol.
@bluemonday09 Жыл бұрын
Just found your channel and it's great!
@GearyGunderson Жыл бұрын
Thanks for checking it out!
@MARKO24653 жыл бұрын
Great video I did two of these last year....I hope yours is holding up. On the parts kits you just need to Dremel with a sanding drum to get the original weld off the parts donor. Then put that on the New PPS43-C and Have someone or do it yourself one quick weld on the pin... of course have it depressed like you have it in your video using clamps. I tried it your way peening it and also used JB weld....after months of using it the pin failed on me. Great job and I hope yours is still holding strong so glad I came across this and have it bookmarked.
@GearyGunderson3 жыл бұрын
Mine is still holding up as of now but that’s definitely something I am going to keep an eye on. Thanks for the advice.
@duanetrivett7502 жыл бұрын
Thanks for the info , you did a killer job !
@jimrodriguez80473 жыл бұрын
Great video! Thanks!
@archpriest62 жыл бұрын
There is an outfit in Warsaw that sold me a new pushpin and spring for my PPS-43C SBR. Website is GENUINE MILITARIA.
@RUSTYSURPLUSАй бұрын
Hello Geary do you know were i can get a pin kit for my pps-43 build ? THANKS RUSTY
@robertjones28112 ай бұрын
I want a bumpstock for mine.
@MisterCheemf2 жыл бұрын
Great tutorial this is so stupid that we have to do this
@kennykash60897 ай бұрын
For educational purposes only (and without a legal discussion), can the PPS-43C upper assembly be installed on a FA lower from a parts kit? I'm assuming the upper has some sort of blocking bar welded in, but I haven't encountered a PPS-43C yet. I'm not building one, but I'm purely curious about the mechanical differences.
@GearyGunderson6 ай бұрын
I have a video comparing the pistol and the remains of an original from a parts kit. kzfaq.info/get/bejne/jJOgiaugvbDalWw.htmlsi=oDBwHS89H_MlVF69 Short answer, the bolts are different, but they freely travel the same distance within the upper.
@nicholasstilley23703 жыл бұрын
Is this still holding up this is a project I've been thinking about doing too and I was wondering what a good way of attaching the new pin was
@GearyGunderson3 жыл бұрын
Mine is still holding up, but another commenter said they tried JB weld last year and it eventually failed. I was able to get my pin peened over enough that it seemed to hold without it and the JB weld was to keep it extra secure. I will keep an eye on it and if if eventually fails I’ll add a pinned comment on this video.
@Tebidiah3 жыл бұрын
How could you remove the roll pin that hinges the top and bottom receiver together?
@GearyGunderson3 жыл бұрын
I didn't separate the top and bottom for this project. Since it hinges open pretty freely, I just had it out of the way while I did the work.
@Tebidiah3 жыл бұрын
I asked because I was wondering if you could swap parts around like on an AR
@thendnjedi138810 ай бұрын
I’m trying to find a parts kit because i’ve noticed on some i’ve found the stock is still in its original state, but a lot of the kits are cut and i don’t have access to a welder. where’s a good a place online to find a kit?
@GearyGunderson9 ай бұрын
Check centerfire systems. I think they are on sale right now.
@let_me_play69363 жыл бұрын
Where are the pistol receivers sold?
@GearyGunderson3 жыл бұрын
I purchased the parts kit of centerfire systems. The actual pistols being imported by Pioneer Arms seem to have dried up with the recent buying sprees, but I expect they will be back in stock at some point and then you can find them at most major firearms websites.
@Kekw203 жыл бұрын
How did you get a completed upper?
@GearyGunderson3 жыл бұрын
There are parts kits out there. I bought one from center fire systems on sale for $100 and used those parts on the pistols that are for sale. I just checked and they are still in stock for $130. They come with some magazines, which is nice.
@redshield24233 жыл бұрын
@@GearyGunderson Thanks for the information. Would you by any chance know if this kit (7.62x25mm) Top Folding Stock will FIT for the PPS-43C in 9mm?? Looking to get SBR my 9mm soon. TIA
@GearyGunderson3 жыл бұрын
@@redshield2423 I am 95% certain that the kit would work, because I'm fairly certain the only real difference is the barrel. I'm pretty sure the 9mm uses the same magazines and everything.
@Prodigysportsman3 жыл бұрын
How solid (ie, no wobble) is the stock?
@GearyGunderson3 жыл бұрын
I think it’s a solid lockup. I’ve done some shooting with it and didn’t have any issues. It’s based on the MP-40 design so you know it’s good since they stole it.
@Jeremiah-mj9kw3 жыл бұрын
Stocks of this type, including those on the original MP-40's, will eventually wobble no matter what. It's just part of the design. Luckily, it's all just stamped metal and it isn't hard to tune when it finally does come loose.
@cptyacob3 жыл бұрын
How far down did you drill?
@GearyGunderson3 жыл бұрын
To expand the hole on the top cover, I drilled all the way through because you have to enlarge it. You have to cut all the way through the pin the manufacturer put in place that immobilized it first.
@Guillo782 жыл бұрын
Thank god that were i live a gun is a gun and theres ni stupid bullcrap to limit me in any way except full auto that illegal
@CantoniaCustoms2 жыл бұрын
What country?
@numbersletters388610 ай бұрын
Awesome tutorial, thanks, just got my stamp. But seriously, regulating sbr, suppressors, short barrel shotguns, is insane. Of course we are going to fill out the form 1, pay the $200, wait and wait, get them engraved, all of it, to put a stock on a gun. And I’m sure most like my carried a pack of copies of all your stamps in your range bag, glove box of ever vehicle, in every safe, and masters in a safe in a safe. Why? BECAUSE WE ARE NOT CRIMINALS AND FOLLOW THE LAWS, NO MATTER HOW STUPID THEY ARE!! So Washington, why don’t you disband the ATF, they are worthless, take all the resources bothering us, and redirect it all to actually make our counties cities safe. If your worried about machine guns, stop hunting law abiding citizens, and go catch the actual domestic terrorists with there Glock switches in Chicago and Baltimore. These criminals actually kill 100s ever week. But yeah, much safer pushing paper and selling stamps to us for our gun mufflers….. You can’t make it up, it’s like they want us disarmed or something and don’t actually care about real crime……. ✝️✝️✝️🙏🙏🙏
@coolbadassguy3 жыл бұрын
How long did it take you to get a tax stamp?
@GearyGunderson3 жыл бұрын
It only took me a little over a month to get it. I did file it electronically which I think sped it up.
@raleigharmslister75273 жыл бұрын
Got my approval in 2 weeks with efile
@KyleWhite-g1m5 күн бұрын
This is actually still illegal, because now that it's a rifle and all the parts are Polish, it's not 922r compliant at all even if it's a legal SBR.
@brentwhitten46293 жыл бұрын
"pistol"
@jeremykemp2598 ай бұрын
Def missed some steps
@lukewarmwater64123 жыл бұрын
when you grow up, get an air compressor and a die grinder. much better than a dremel.....
@shawnclifton94163 жыл бұрын
Asshole. when you grow up. Yours probably belongs to your daddy. Just because your not talented enough to do it without a fortune in tools. your like one of the HVAC guys with the 750 digital gauges who can't fix shit.