How to scrap a dryer for maximum profit, easy and fast

Рет қаралды 4,255

4 ай бұрын

How to scrap a dryer for maximum profit, easy and fast.
Scrap or Grandpa, taking apart three dryers for the electric motors and copper wiring and any other non-farris material we can find. Scrap Metal recycling at Scrapping With Grandpa.
#scraplife #scrapmetalrecycling #scrapping #freestuff #wwwp #dumpsterdiving #scrappingwithgrandpa

Пікірлер: 61

@ScrapMan69 4 ай бұрын

I take them dryers apart then I sell the inside of the drum and put it on Facebook marketplace sell them for 20 to 15 bucks for a fire pit easy money! Great video buddy!

@ScrappingwithGrandpa 4 ай бұрын

I don’t have any luck at all selling them things online and a lot of them have plastic on the inside of them Hass to be taken off somehow or another so I’ll stick with selling my for now

@dwaynefowler7093 4 ай бұрын

I WAS ASKED ME IF HE WAS THE BEST SCRAPER ON KZfaq I TOLD HIM HELL NO!!!!!!!!! THE BEST SCRAPER ON YOU TUBE IS SCRAPING WITH GRANDPA ANDREWIS THE BEST

@ScrappingwithGrandpa 4 ай бұрын

Lol. No way. You know you’re the best Dwayne, your damn good at it.

@BigE143 4 ай бұрын

Liking the videos red the big country scrapper sent me

@ScrappingwithGrandpa 4 ай бұрын

He is a great, Scrapper

@deepblue7545 3 ай бұрын

🎉🎉😂dnxkftkd😂🎉

@SkullerMetals 4 ай бұрын

My man, you do all the work to save those clips - you send them to me and I'll melt them into a bar and send the bar back to you for your shop. Would be happy to.

@ScrappingwithGrandpa 4 ай бұрын

That would be awesome and something I might be interested in doing for sure

@SkullerMetals 4 ай бұрын

@@ScrappingwithGrandpa I just did all mine. Just have to melt it now.

@elissabradbury5375 4 ай бұрын

Thank You for all the tips on scrapping ! Awesome video Grandpa ! 👍

@ScrappingwithGrandpa 4 ай бұрын

Very welcome

@jrae6608 4 ай бұрын

Great break down video

@ScrappingwithGrandpa 4 ай бұрын

Thanks

@bigcountryscrapper6885 4 ай бұрын

Great video my friend

@ScrappingwithGrandpa 4 ай бұрын

Thank you 👍

@Walkerbabe 4 ай бұрын

Great breakdown video. Excellent commentary too. Have you considered finding an "appliance guy" who will pay you for each washer and dryer? Or, have you found that there's more money in breaking them down?😊

@ScrappingwithGrandpa 4 ай бұрын

Interesting thought I have talked to a couple people and I think I might’ve found one

@alanwilliams2452 4 ай бұрын

Great video G-pa

@ScrappingwithGrandpa 4 ай бұрын

Glad you enjoyed it

@deborahclark1136 4 ай бұрын

I have to admit, I did get dizzy on the other video. I did think it was funny. I enjoyed this video.

@ScrappingwithGrandpa 4 ай бұрын

Glad you enjoyed it

@adamdulworth7828 3 ай бұрын

If you could do a video sometime of Total scrap out on a window AC unit I'd appreciate it

@ScrappingwithGrandpa 3 ай бұрын

Ok will do. I have 3 of them

@Paulie1232 4 ай бұрын

This is good information to know, thanks...😊

@ScrappingwithGrandpa 4 ай бұрын

Thank you for stopping by and leaving a comment my friend

@roadhog1987 4 ай бұрын

Great video brother I can't wait to see the boat in the water

@ScrappingwithGrandpa 4 ай бұрын

Where have you been my friend? You should call me. I’ve tried calling you.

@noneyabeeswax3200 4 ай бұрын

Just saw the Canadian pull 27$ out of a dryer scrapping it,keep an eye out for rings as well 👀

@ScrappingwithGrandpa 4 ай бұрын

Wow. Amazing

@peteoneill5799 4 ай бұрын

The reason you get such a low price for shred is because they account for all the plastics etc that come with it. You are well within reason to remove the motor and cables from the washing machines in my opinion.

@ScrappingwithGrandpa 4 ай бұрын

That is true, so yes, probably right. I should go ahead and pull in motors next time. Thanks for the tip. Good ideas

@kevinhaley6776 4 ай бұрын

Grandpa loves his scrap metal

@ScrappingwithGrandpa 4 ай бұрын

Thanks

@dwaynefowler7093 4 ай бұрын

ya that glue take a heat gunand heat it up and see if that would help? and i put theback,front,cut the sides off stacka few of themin my baler thay weight well a bal of carboard weights around300-550 depending on the size of beler,i have a big beler wheb it gets full the card board weights around 5-600 pounds a bel. back to the gule heat it up andpull it appart

@ScrappingwithGrandpa 4 ай бұрын

I know a Baller would probably be nice but I just don’t have one and can’t afford to buy one

@codybischoff2134 4 ай бұрын

Hey grandpa i know you been scrapping for years. I’ve been doing since i was a little kid with my dad. What’s the most amount of money you’ve found in a dryer? I’ve found tons of change in dryers

@ScrappingwithGrandpa 4 ай бұрын

7.15 was the most.

@dwaynefowler7093 4 ай бұрын

i hope you dont get mad about all the comments i make iknow every one has there own way butmyway is not the best way i have a 10dt long5ft wide tabel i put every thing onim working on get it done start on someting els one thing at atime

@ScrappingwithGrandpa 4 ай бұрын

Interesting love to see your set up

@MrScrappity 4 ай бұрын

You don't pull the Incolnel from the heat elements 🤔 Scrappity gets over $1.00 a pound for it 🤷🏻

@MrScrappity 4 ай бұрын

Just like to see everyone maximize their profits 😁

@ScrappingwithGrandpa 4 ай бұрын

That’s interesting I need to find out more about that because I thought it was more like $.15 a pound dirty Stainless Steel

@MrScrappity 4 ай бұрын

@@ScrappingwithGrandpa I've never gotten less than a buck It's not like burner off a stove top It's clean , just a stainless alloy mix

@ScrappingwithGrandpa 4 ай бұрын

Mr. Scrapping. That is very interesting. I actually thought it was gonna be dirty Stainless so if it’s clean Stainless I’ll start saving it because it’s $.20 more for a pound around here for clean stainless. I’m not sure how you get a dollar per pound I only get $.40 a pound for Kleen Stainless.

@alanwilliams2452 4 ай бұрын

Bet they threw out the dryer cause the belt was gone it would still work

@ScrappingwithGrandpa 4 ай бұрын

You might be right and I really need to find somebody that buys them from me. I have a guy I just need to do a little bit more research.

@genius1198 4 ай бұрын

Why couldn't you sell the drums as mini burn barrels

@ScrappingwithGrandpa 4 ай бұрын

I have full size drums I sell. I have a hard time selling mini drums like that.

@alanwilliams2452 4 ай бұрын

South Florida pays only 05.5¢pound

@ScrappingwithGrandpa 4 ай бұрын

Wow, that’s next to nothing

@peteoneill5799 4 ай бұрын

Just watched coonts pull one of those dryers apart and it had 27dollars inside it

@ScrappingwithGrandpa 4 ай бұрын

Wow. That’s amazing

@noneyabeeswax3200 4 ай бұрын

😂I just said that

@ScrappingwithGrandpa 4 ай бұрын

Lol

@hisandherscoins 4 ай бұрын

I put in vice and pull them I don’t boil plugs only ones r dryer plugs u be crazy not to pull them out i don’t mess around with that crap no money after u broke everything down I take what fast that’s it

@ScrappingwithGrandpa 4 ай бұрын

I agree