How to screen print HD on HD transfer logo？
Preparation:
1.Mesh:100-120(40-48T)mesh number;squeegee:65-75 degree squeegee.
2.Fast dry catalyst XG-866B-2 mixing ratio 2-3%.
3.Silicone pigment XG-serise mixing ratio 10%.
4.Silicone thinner XG-128AH mixing ratio 10%.
5.Bake at 100 ℃ degrees for 30 minutes.
6.Table drying temp 120 degrees 3-4 times.
Process:
Step1:Glue under printing 10 layers.
Glue XG-360R-2X 100G
Step2:Crossing linker printing 2 layers.
Crossing linker XG-360Z-3X 50G
Fast dry catalyst XG-866B-2 5G
Step3:Transfer silicone thick printing 10-15 layer.
Transfer silicone XG-866A-2Y 100G
Fast dry catalyst XG-866B-2 2G-3G
Thinner XG-128AH 10G
Step4:Color printing 4 layers.
Transfer silicone XG-866A-2Y 50G
Silicone pigment XG-serise 5G
Fast dry catalyst XG-866B-2 1-1.5G
Thinner XG-128AH 5G
Step5:Glossy silicone printing 1-2 layers.
Glossy silicone XG-399-3 50G
Fast dry catalyst XG-866B-2 1-1.5G
Step6:Crossing linker printing 1 layer.
Crossing linker XG-360Z-3X 50G
Fast dry catalyst XG-866B-2 5G
Step7: Transfer silicone thick printing 8-10 layers.
Transfer silicone XG-866A-2Y 100G
Fast dry catalyst XG-866B-2 2-3G
Thinner XG-128AH 10G
Step8:Color printing 4 layers.
Transfer silicone XG-866A-2Y 50g
Silicone pigment XG-serise 5G
Fast dry catalyst XG-866B-2 1-1.5G
Thinner XG-128AH 5G
Step9:Glossy silicone printing 2 layers.
Glossy silicone XG-399-3 50G
Fast dry catalyst XG-866B-2 1-1.5G
Step10:Matte silicone printing 1 layer.
Matte silicone XG-866M-6 50G
Fast dry catalyst XG-866B-2 1-1.5G
After finish,bake at 100℃ for 30 minutes.
Hot press 170 ℃ for seconds on fabric.
For more silicone ink information kindly follow our website :www.xgsilicone.com or contact with Lily :+86 13825488489 whatsapp&wechat the same number