Very good! I've been spraying houses since 1979 but I've gotten rusty over the years. These videos are very helpful and I really enjoyed them !
@swordfish11203 жыл бұрын
Do u have a video that shows different tip sizes shot through the same sprayer using the same paint (to show the amount of paint through different orifices and the speed needed to use these tips)? If not, it would make a good video.
@TScott-vp9zv10 ай бұрын
Mannnn, your videos are so thorough but yet succinct! Thanks for the info. Cheers from Houston, Texas!🙏🏾✊🏾
@grubbetuchus4 жыл бұрын
Excellent exposition, especially on how to decipher tip numbers
@Garciamrcool5 жыл бұрын
Thanks, I’m thinking of buying a sprayer and this info is very helpful
@Alive761Ай бұрын
Thank you! Great information in a tidy package!
@Gaddman014 ай бұрын
Hey Josh, I've just purchased a Graco 390 and very new to spraying. Would love to know more on spaying. What types of paint ie satinwood, can I use small amounts for doing trim etc. using emulsions and masking up
@alextrading38563 ай бұрын
thank you
@tarasforkos544510 ай бұрын
Thank you for information
@nikolaygrigorchuk5335 Жыл бұрын
Thank you for information. I have CRACO Magnum X5 TRUEAIRLESS, which tip I should use to paint kitchen cabinets?
@marchandford7787 Жыл бұрын
Thanks again very helpful. Do I have to different spray caps for the different tips due to the tip seals in the cap? Or is there an easy way to swap them out. Also can you use a FF LP tip to spray emulotion paint on to the walls?
@roystonpaulmckenzie38785 ай бұрын
Wht is 413 tip good for??
@dsbelanger5 жыл бұрын
Well done!
@franklingrebbo5 жыл бұрын
awesome info, thank you
@alanmcgrath20093 жыл бұрын
Josh, can you use a Wagner HEA tip on a graco unit?
@tribulationprepper7874 жыл бұрын
CAN I APPLY THICK DECK PAINT using an X19 and an available spray tip? Thanks
@saudinhodzic36722 жыл бұрын
What is the best tip to use for kitchen cabinets using emerald urethane trim enamel ?
@swiss3001734 жыл бұрын
Great channel 👍🏻 maybe stupid question but do any make tip fit any machine? Thanks
@ProfessionalPainterDecorator5 жыл бұрын
nice video: Question. if using the 414 tip you mention and its too big and you go to a 210 (not a 214). would you thin the material a little bit more to aid in the flow of paint through the smaller orifice?
@SprayDirect5 жыл бұрын
Philip Beckwith yes quite possibly, If you want to spray it neat I would try that first but you may have to thin.
@djremedy15179 ай бұрын
I have a question, I have some paint that states 0.19 thou minimum for airless sprayer. Can I go lower to let’s say a 317 tip? I’m new to this so just trying to get my head around it 😂
@Puppygirl-hj1tn4 жыл бұрын
Awesome tips. Pardon the pun
@davemedley31284 жыл бұрын
Nicely presented. I'm spraying kem aqua waterborne laquer with a 310 fflp tip. Graco. 495.Does 1400 psi sound about right for cabinets? The data sheet says to use 12 to 15 tip but I was afraid of a rougher orange Peel look. What do u say? Thanks.
@SprayDirect4 жыл бұрын
Dave Medley thank you, really hard to say as there are still a lot of variables. What I’d do is get a bit of scrap to practice on. If you haven’t check out the video on setting up an airless unit 👍 hope this helps- How to setup your Airless Paint Sprayer kzfaq.info/get/bejne/orqFjdpmtd7Mkok.html
@fernandosalas85895 жыл бұрын
The paint manufacturer suggests a tip between .025-.036 which tip I should get I already have 515. Iam new at this thanks.
@SprayDirect5 жыл бұрын
Fernando Salas that sounds like a fairly thick product?! Essentially the paint manufacturer is saying you need a tip that ends in at least 25, so a 525 for example. With a tip size that big or bigger, should you need it, you would need to check whether your machine would actually pump this product. What machine do you have?
@fernandosalas85895 жыл бұрын
Spray Direct graco x7
@SprayDirect5 жыл бұрын
Fernando Salas the Graco Magnum X7 will support a maximum tip size of .017. I don’t think it will pump the paint you are looking at.
@fernandosalas85895 жыл бұрын
Spray Direct OK thanks
@fernandosalas85895 жыл бұрын
Spray Direct one more thing the paint manufacturer also says a psi of 1500-2000 the x7 has up to 3000psi.
@_Common_Logic_3 жыл бұрын
I'm looking to reduce (control) my paint output in order to spray the INSIDE of kitchen cabinetry without sagging the crevices and corners... I'm using an industrial waterborne clear over a previously applied tinted primer. My titan sprayer shoots at 1700lbs max but I'm hoping to choke that down a bit. What tip would you recommend?
@17N.2 жыл бұрын
309 I believe would do the job just fine.
@PedroHernandez-ou5wy3 жыл бұрын
What tip I should use for paint the walls of my room I just got the TC PRO sprayer cordless your advice will help !!
@stevetryit3 жыл бұрын
5-15 is the most standard
@TheJpassarella4 жыл бұрын
What tip would you recommend for a stain instead of paint
@SprayDirect4 жыл бұрын
TheJpassarella what are you spraying on to?
@christopherwilson84733 жыл бұрын
What tip to spray a door and trim
@ThekiBoran3 жыл бұрын
What are you spraying?
@mikimiki1952 жыл бұрын
My F(king head is pinning sounds like they’re all the same 🤯
@LiaqatAli-ro5dm2 жыл бұрын
We need just tip size number not only sambal
@jabaralanzi98495 жыл бұрын
👍👍👍👌❤️
@zeetrain96253 жыл бұрын
They should give these to all of us who own and extension, not have to pay over $100 for a damn valve..