Did you forget to grease the filter (as the manual states) around the edges so it's sealed once installed?
@G212425 ай бұрын
does anyone know how to reset the spanner symbol on 2021 tc 125 after a service?
@Lexluther6188 ай бұрын
I get a small amount of oil around the crank case breather hose (not enough to leak out of the air box). I have a KTM 500 exc-f and the crank case breather hose is routed to the air boot. It’s not the air filter oil. Just wondering if anyone else experiences this? I get more when I ride more wide open desert with higher sustained RPMs.
@user-jt8xw6fd1v3 ай бұрын
Which bike brand (among the modern 300cc 2-stroke enduros) has the easiest sollution for changing filter? Are there filters that come pre-oiled if I want to avoid the cleaning/oiling/drying process?
@rmatvmc3 ай бұрын
Changing an air filter will generally be the same. We have a selection of pre-oiled air filters, so you don't have to deal with the mess. Enter your year/make/model and you'll find everything you need.
@nickcordon501010 ай бұрын
What oil are you using for the foam air filter?
@rmatvmc10 ай бұрын
We used the Maxima FFT for this filter. You can check that out here: www.rockymountainatvmc.com/parts/maxima-foam-air-filter-oil-p
@user-vb1mf8be8d11 ай бұрын
What if bike sucks a little bit air filter oil?
@rmatvmc11 ай бұрын
You'll probably be fine, just avoid it. You need enough oil on there to prevent dirt from passing through, and when the oil does get sucked in, the bike is usually hard to start. Also the fuel injected bikes have a sensor in the airbox that should stay clean for accurate readings. -Charles
@Wrld-hates-me8 ай бұрын
What gloves do you use
@rmatvmc8 ай бұрын
We use the Tusk Disposable Nitrile Gloves: www.rockymountainatvmc.com/riding-gear/tusk-disposable-nitrile-gloves-p You can also use PVC gloves: www.rockymountainatvmc.com/riding-gear/tusk-pvc-gloves-p
@christophervillarreal856525 күн бұрын
I don’t use the air filter oil anymore once you dip it in it’s way too much oil and will leak even if you get all the oil out by squeezing, eventually it will settle to the corner and drip. I just use the spray air filter oil and it does fantastic. I use the cleaner though but that thing is so filthy now lol it’s probably time get a fresh bucket 😂 I also never grease the air filter edge it’s unnecessary.