Set single cap and double cap rivets in leather tutorial for beginners to leather crafting. A look at using hand tools and a press to set rivets .
Пікірлер: 93
@richardanderson491611 ай бұрын
I could listen to her talk all day. What a lovely accent. Thank you for tge instruction ma'am
@LeatherClass11 ай бұрын
Thanks for your beautiful comment!
@dianeperkins92943 жыл бұрын
Brilliant video. You’ve explained the techniques of using both lots of tools really simply which I needed. Thanks so much. X
@LeatherClass3 жыл бұрын
Thanks very much. I am so glad you found it useful.
@blixten2928 Жыл бұрын
EXCELLENT, simple, straightforward, useful! THank you, you are a great teacher!!
@LeatherClass Жыл бұрын
Glad it helped and thanks for your compliment!
@wizdom-16843 жыл бұрын
I have been looking for a how-to- do rivets. Thanks a million for this video as am new to sewing and bag making.
@LeatherClass3 жыл бұрын
Thank you. You're starting an exciting journey - enjoy!
@SarahZunigaMusic3 жыл бұрын
Thank you!! So nicely explained and it helped a lot! ❤️
@LeatherClass3 жыл бұрын
Thank you for your lovely comment. Glad it helped.
@jordanwhite54702 жыл бұрын
Love the "leather sandwich"!! I work with a lot of lighter leathers, and often run into this problem. Thanks for the tip :)
@LeatherClass2 жыл бұрын
Glad you found the tip helpful! :)
@rockybalboa854 жыл бұрын
This is so helpful! I'm making toe caps for my roller skates and I was unsure how to plug any space in my rivets as they looked a bit big! Thank you!
@LeatherClass4 жыл бұрын
Thanks Leanne, so glad you found it useful.
@leathermule48243 жыл бұрын
Explained nice and easy! Well done.
@LeatherClass3 жыл бұрын
Thank you! 😉
@LaChigary5 жыл бұрын
Thank you so much for this video . Just that little tip of sandwiching the piece of leather in between the two was over my head til you demonstrated .I was smashing rivets , because it wasn't thick enough . You've got a new subscriber .
@LeatherClass5 жыл бұрын
Thanks Mark - I'm so glad you found that tip useful.
@Vinterfrid3 ай бұрын
So you're actually saying that you couldn't figure that out yourself? Honestly? 🤔
@wesleymarkmusic403 Жыл бұрын
Nice. Very helpful. Thank you.
@LeatherClass Жыл бұрын
You're most welcome.
@tigermcflash1317 ай бұрын
Thank you! Very useful video!
@LeatherClass7 ай бұрын
You're most welcome and glad it was useful for you!
@L.i.s.a....2 жыл бұрын
Very helpful, thank you.
@LeatherClass2 жыл бұрын
Glad it helped!
@jordanwhite14202 жыл бұрын
Awesome!! You answered a question for me about what happens if your cap stem is too long ..... "just add another small piece of leather"!
@LeatherClass2 жыл бұрын
Thanks for the Awesome!! So glad it was helpful.
@winningnumbers3 жыл бұрын
Perfection!! brilliant!!! what can I say, this answered all my questions. Thank you.
@LeatherClass3 жыл бұрын
Thanks for your lovely comment - so glad it helped,
@winningnumbers3 жыл бұрын
@@LeatherClass Can I use a snap as a rivet?
@LeatherClass3 жыл бұрын
@@winningnumbers Yes, if you want to hold 2 pieces of leather together.
@winningnumbers3 жыл бұрын
@@LeatherClass Thank you again
@emmagemmahair72823 жыл бұрын
Thank you. Very good video.
@LeatherClass3 жыл бұрын
I appreciate that - many thanks.
@bhavisworld10572 жыл бұрын
Thanks for the information
@LeatherClass2 жыл бұрын
You are very welcome.
@saltlifegull40914 жыл бұрын
Awesome video, Nancy. I've watched so many of these videos trying to learn, but you video is far better and more simple to follow. Thanks so much for your instruction. Keep up the great videos!
@LeatherClass4 жыл бұрын
Leah, thanks so much for your kind comment. It has really brightened up my day!
@joycelondon16394 жыл бұрын
Thanks for sharing Atlanta Ga USA helpful 👀 next time
@LeatherClass4 жыл бұрын
Hey Joyce London...thank you for your lovely comment.
@corinnegeddings46672 жыл бұрын
thank you so much!
@LeatherClass2 жыл бұрын
You're welcome!
@markdmaker31734 жыл бұрын
Excellent video. New subscriber
@LeatherClass4 жыл бұрын
Thanks so much... it's much appreciated.
@blancarinconv9080 Жыл бұрын
Thanks so!
@LeatherClass Жыл бұрын
You're welcome!
@stefaniealbertzoon85955 жыл бұрын
Thank uuuu so much!!
@LeatherClass5 жыл бұрын
You are most welcome Stefanie.
@seanditch44192 жыл бұрын
Hi Nancy, thank you for this video your bonkers...🤣 you made i larf you did🤣, is there a golden rule of thumb for leather thickness to rivet post length? Thx
@nicov39272 жыл бұрын
thank you Popy golberg
@LeatherClass2 жыл бұрын
You're very welcome.
@danielrushton20902 жыл бұрын
Thanks for your video,I can now do this on a saddlebags that needs repairing.just out of interest,where could I buy the leather lion emblem card holder please ?
@LeatherClass2 жыл бұрын
Glad it helped you Daniel. That leather cardholder was just something I made to sell at a local market. Thanks for the interest! mmm, maybe I should make some more...
@flyingcat2054 Жыл бұрын
Thanks. Can you nip the rivet stem with pliers if it's a bit too high for the thickness of leather? Or is this type of rivet not suitable to nip off? I know you can nip copper and brass rivets.
@LeatherClass Жыл бұрын
I suppose you could give it a go but I think it would be difficult to get a clean finish - just best to get the right sized rivet I'd suggest.
@reedleatherware5 жыл бұрын
This is really nice. Please make more. You'll be very popular 😉
@LeatherClass5 жыл бұрын
Thanks so much for your support Aaron - it's really appreciated. I just made a short new video on using leather stamps, so great timing! kzfaq.info/get/bejne/g9J_gZml0bWuiXU.html
@orbitaljellyfish8083 жыл бұрын
Is it possible to set a rivet tightly in just one (3mm) layer of leather? Like will the two rivet halves crush together enough? These are just for looks but need to set tightly. Great vid thanks 👏👏
@LeatherClass3 жыл бұрын
Yes, you should be able to do that - just try a small sized rivet because the larger they get the longer the 'stem'. Hope that helps.
@orbitaljellyfish8083 жыл бұрын
Leather Class yes, thanks again. For my use-case; reason for using rivets would be the low profile + large diameter caps. But large diameter is also long stems. Unless I’m missing something? Maybe Amazon isn’t the best place for supplies.
@LeatherClass3 жыл бұрын
@@orbitaljellyfish808 In that case .....forget rivets. I would go for ' leather claw studs' instead...then you could have as large a diameter as you wanted.
@anjchauhan7460 Жыл бұрын
hiya does the same principle apply to embellishing a pvc fake leather jacket?
@LeatherClass Жыл бұрын
Yes, it's the same. But with pvc, you'll have to be delicate when setting the rivets - maybe make a smaller hole too.
@woollyy Жыл бұрын
The double cap rivet I have clicks when you press on the cap. What happens when you hit it with a hammer? If the bit sticking up is longer than 3mm will it still lock? Or will the post just bend? You can probably tell I am new to this and don’t really understand how these rivets work. Thanks
@LeatherClass Жыл бұрын
It's good that it clicks - that means it's going to be secure. When you hit it with the hammer that will set it so that it doesn't come apart. If the post sticking up is longer, then it may show a little bit on the other side. Hope that helps.
@woollyy11 ай бұрын
Many thanks
@baebongdong23704 жыл бұрын
Can I use a 5mm setter for 4mm rivets? Or does the setter have to be exactly the same size as the rivets?
@LeatherClass4 жыл бұрын
Hi, it's best if you use a setter to match the rivet size for a nicer finish. If you use a larger setter than the rivets then the extra rim of the setter can make an impression on your leather.
@baebongdong23704 жыл бұрын
Leather Class thank you very much! ❤️
@marya.martin74553 жыл бұрын
This was perfect! Thank you! Leather sandwich...lol.
@LeatherClass3 жыл бұрын
Glad it helped! Yummm...
@supermario79565 жыл бұрын
Am I your first subscriber 😁😎 let’s make more videos you can do this
@LeatherClass5 жыл бұрын
Thanks so much for your encouragement Leathersmith Reviews - I have more in the pipeline.... but you know how it is sometimes, with life 'n all, getting in the way...!
@supermario79565 жыл бұрын
Leather Class I know what you mean we can do this 😎
@jutetwine44824 жыл бұрын
Hi, thanks for sharing the method and the difference of the end works. I am looking at buying the press machine and dies. Do you have experience buying the machine and die from one supplier and the rivet from different supplier? My concern is the dies may not be compatible with the rivet if they are from different suppliers.
@LeatherClass4 жыл бұрын
Hi, yes I bought a machine, dies and rivets from different suppliers. As long as you buy the correct sized rivets for the dies you have.... then everything will be fine.
@jutetwine44824 жыл бұрын
@@LeatherClass thank you for your advice, appreciate it..
@jutetwine44824 жыл бұрын
@@LeatherClass oopss..I have another question. If the sizes of my rivets are 4,5 and 6 mm, are the sizes of rivet setters should be 4,5 and 6 mm too? For the eyelets, I have 4 mm inner hole. What is the setter size should I use? All for manual .
@sallycabuang49223 жыл бұрын
I need to buy rivet for leather at 9mm.12mm and 805 I here in Philippines how
@LeatherClass3 жыл бұрын
Have you tried buying online?
@tariqhassan387 Жыл бұрын
These rivets are OK on 8mm thick leather ?
@LeatherClass Жыл бұрын
Yes, you just need to make sure the rivet length is the right size OR your could thin the leather just in that spot to make the rivet work. Hope that makes sense! It's early here.🙂
@tariqhassan387 Жыл бұрын
@@LeatherClass belt I manufacture they are used in power lifting & I don't know how durable rivets gonna be !
@LeatherClass Жыл бұрын
@@tariqhassan387 You will need to do some testing beforehand with the rivets you're using then.
@Vinterfrid3 ай бұрын
As far as I know the U.K. went metric some 30 years ago...so how come you're still using the imperial system for measurements? 🤔
@sonny92775 жыл бұрын
I have a press like yours but i need to buy more dyes where can i get them?
@LeatherClass5 жыл бұрын
I got mine from ebay. That's probably the cheapest option and I'm sure you should be able to find there there.
@honeykylie23 Жыл бұрын
Where I can buy 5/16 in rivets gun?
@LeatherClass Жыл бұрын
Online shopping or your local leather shop.
@sabsdsa49913 жыл бұрын
where to buy the rivet tool
@LeatherClass3 жыл бұрын
best prices are online - or you can check your local leathercraft store. You may get good deals in the New Year sales...
@MeliMelVSG3 жыл бұрын
Can you remove them?
@LeatherClass3 жыл бұрын
It's difficult but yes, with pliers and a good grip .