How to set Timer XY-WJ01 and wiring for incubator

How to set Timer XY-WJ01 and wiring for incubator - English

Рет қаралды 12,727

2 жыл бұрын

this is xy-wj01 timer which have multi functions settings but we need to set it on loop setting which will we useful for incubator egg turners and other things we need to work for limited time.
#xywj01 #timer #wiring

Пікірлер: 37

@simulatedfish1995 11 ай бұрын

Thank you for the clear instructions and assistance and setting this up for DIY use

@Umairworkshop 11 ай бұрын

You are welcome

@balik_tutkusu 2 жыл бұрын

Thank you for explanative video. You saved me to loose time to decipher this control unit.

@Umairworkshop 2 жыл бұрын

You are welcome

@nonam2863 2 жыл бұрын

best youtuber and videos bro big fan from nepal

@Umairworkshop 2 жыл бұрын

Thank you

@pearljameric 2 жыл бұрын

This will work well for my live well timer in my bass boat. Thanks

@Umairworkshop 2 жыл бұрын

You are welcome

@yasinkizilirmak7468 2 ай бұрын

Thank you.

@Umairworkshop 2 ай бұрын

You are welcome

@enriqueavila2234 Жыл бұрын

Muy bueno y bien explicado gracias solo mejor que fuera en Español

@Umairworkshop Жыл бұрын

You are welcome

@anooky1 Жыл бұрын

Humidity and temperature controller mai kosi acha kam karta hai ?

@Umairworkshop Жыл бұрын

Xm18 is better

@lynnzimmerman4853 6 ай бұрын

I am controlling an LP generator and would like the timer to be on OUT for 1 hour (OP) and remain off for 2 hours (CP), then loop back to the beginning to start the timer again. I am using (P4) but I am having trouble with setting the times with multi decimal points, etc. Can you show me what the settings should be for 1 hour when displayed on the screen, showing the number and how many decimal points show?

@Umairworkshop 6 ай бұрын

If set like 9.9.9 it means these are minutes and if set like 99.9 it means it is hours

@robbousquin9630 5 ай бұрын

could you tell me why my unit " ALWAYS " "Always" shuts down completely after 5 mins exactly 5 mins. is there a setting someplace to prevent this thank you

@Umairworkshop 5 ай бұрын

I think it is set on saving mode only display will shut off but will keep working, if it shut down the circuit and you have to set again then it might be a circuity issue.

@cyberbeast1789 2 жыл бұрын

Is your FAN 220v AC? i just bought one of this and upon checking the board inside, the relay spec is 20A 14vdc and 125vac only. And in order to safely run 220v appliances a relay must have 250vac. from philippines.

@Umairworkshop 2 жыл бұрын

Yes fan is 220v , relay must be 220v or it will burn

@enesaydn6054 2 жыл бұрын

Thank you for video sir. Can you explain too p4 if it possible

@Umairworkshop 2 жыл бұрын

Here is the full detail kzfaq.info/get/bejne/mrZ7g92Al7OlmGw.html

@enesaydn6054 2 жыл бұрын

@@Umairworkshop thanks a lot

@Umairworkshop 2 жыл бұрын

@@enesaydn6054 you are welcome

@v.gedace1519 Жыл бұрын

What happens if e.g. program P6 is running, the power fails and after a few minutes the power is back? In this case, does the last used program (P6 in our example) start automatically or must some button be pressed?

@Umairworkshop Жыл бұрын

Once the setting is set it will be save on it , if light fails and come back it will start counting from the start

@pearljameric 2 жыл бұрын

Is there a way to turn it completely off?

@Umairworkshop 2 жыл бұрын

Yes it can be turn off by on off button

@anooky1 Жыл бұрын

یہ بہتر stc سے ??

@Umairworkshop Жыл бұрын

Yeah sirf timer hai

@anooky1 Жыл бұрын

@@Umairworkshop acha mai tu samja tha ya humidity and temperature controller hai