Рет қаралды 62,644
We know how hard and complex it is to adjust the height of a tool. And how frustrating all the more to cause damage just because of miscalculation.
So... We've made sure that this problem will no longer be a problem - through Masso's Automatic Tool Zero.
With Auto Tool Zero, your work will be much easier!
Here are the steps below.
Step 1: Start by positioning a touch plate on the machine bed at a fixed position.
Step 2: Wire the connection to any 32 inputs we have on the MASSO
Step 3: Go to F1 set up MASSO screen. Go to input 32 and Select Tool
Setter input.
Step 4: Go to F3 screen. Position the tool in the middle of the touch
plate.
Step 5: Copy the X and Y machine coordinates
Step 6: Go back to F1 screen. Go to Auto Tool Zero. Enable Automatic
Tool Zero. Assign the Value of X and Y locations. Enter a Z safe
distance to tool setter. Enter a value in Tool Zero Feed Rate in which you like to zero your tool.
Step 7: Every time there is a Tool Change command, MASSO will come on the Location Changer. Automatically stops the Spindle then
ask to change the tool.
Step 8: Run the test program. Load the file. The controller will request to Load Tool Number 3. After changing the tool press Enter or click OK.
Step 9: MASSO will start the Tool Zero process. It will start the plate and machining.
► Guide on how to setup:
masso.com.au/docs/masso-cnc-c...
► More videos are on our channel bit.ly/massoyoutube
Do you think that this feature is better than Mach3 Auto Tool Zero? Comment below!