The factory SiriusXM tuner will not simply plug into an aftermarket in dash receiver. It may be possible to use your factory SiriusXM tuner if you use the iDatalink Maestro RR OEM integration unit. This depends on your vehicle being supported by Maestro RR. Check out this video for more information: kzfaq.info/get/bejne/fb5olaiFrdC-m5s.html If your vehicle is not supported by Maestro RR, you can buy a SXV300 Tuner from SiriusXM. You can usually buy this tuner with a service rebate making it very low cost. You can see SiriusXM operation here: kzfaq.info/get/bejne/rd6EgNyKm9K2YnU.html

The Pioneer SPH-DA230DAB works with Android Auto with a wired connection through USB. It also works with Apple CarPlay with a wired connection through USB. You can learn more about operating Android Auto on a similar receiver here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html For information about using a wi-fi dongle I recommend to contact the manufacturer of that product. You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzfaq.info/get/bejne/o66gicmg2svTdXk.html and you can find more videos on Pioneer's KZfaq Channel here; kzfaq.info

As of 2018 November, Android Auto Wireless is available on Pioneer AVH-W4400NEX kzfaq.info/get/bejne/es1jf7eTzMrDj58.html and Pioneer AVIC-W8400NEX. kzfaq.info/get/bejne/ZtaUfdR_rra0nIE.html Apple CarPlay wireless is available on Pioneer AVIC-W6400NEX, Pioneer AVH-W4400NEX and Pioneer AVIC-W8400NEX. You can see it here: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html You can find more videos from Pioneer here: kzfaq.info

I tested this in 2019 August with a Pioneer AVIC-W8500NEX with a Pixel 2 and Android Version 9.0. The phone is connected to the in-dash receiver with Android Auto Wireless. When I switch on the phone's mobile hotspot, Android Auto wireless disconnects. In order to re-connect Android Auto Wireless, I must switch off the mobile Hotspot on the phone. You can find more videos with very similar operation to Pioneer AVIC-W8500NEX in this Pioneer playlist: kzfaq.info/get/bejne/rtygZZxilarVgac.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

You can find more How To videos about Pioneer NEX in-dash receivers with very similar operation to Pioneer AVH-W4400NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html Please be sure to install the latest firmware update for your Pioneer AVH-W4400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Android Auto Wireless requires Android OS Version 8.0 (Oreo) or higher and the Android Auto App. You can find more videos about AVH-W4400NEX here: kzfaq.info/get/bejne/es1jf7eTzMrDj58.html

I recommend getting a Pioneer AVH-W4500NEX. You can see it here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html As of 2019 September, you can make a Samsung phone work with Android Auto wireless with this: If you use this it will work!! Got working on my Note 10 @ the wife's S10 plus! hope this helps! !) mspoweruser.com/tutorial-how-to-setup-wireless-android-auto-on-non-google-phones/ You can find move videos about Pioneer AVH-2330NEX in this Pioneer Playlist: kzfaq.info/get/bejne/rtygZZxilarVgac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Android Auto Wireless and Android Auto are two different things. I see no reference to Android Auto Wireless on the Pioneer Europe Website: www.pioneer-car.eu/eur/products/avic-z910dab The website references Apple CarPlay with a wireless connection, and Android Auto with a USB connection, but no mention of Android Auto Wireless. Is Android Auto Wireless available in France as of 1 July 2018?

Deckerd Otto pioneer europe said that it's not there yet, they are waiting for the official release of Android auto wireless. from what I understand it's already there in the US but probably not in Europe. he said that my units will require a firmware update to support it. Still the firmware seems very alpha to me as the Wi-Fi channels are wrong for europe. But at least now I know why it doesn't work as they simply didn't enable the future or because it's not available yet in europe

Have you been able to get Android Auto work with your AVIC-Z910DAB? Have you tried with any newer phones having Android 9 (Pie) ???

The Pioneer AVH-W4500NEX does not support a USB hub, or any type of USB splitter from USB port 1 or USB port 2. FYI - The Pioneer AVH-W4500NEX has an SD Card Slot behind the screen. You can see it here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html You can put the images along with music and videos on an SD card. That will work. Be sure to format your SD Card or USB drive as FAT32, or NTFS. Don't use ex-FAT. It does not work. You said you have a different USB flash drive that is operating correctly. Put the images you would like to use on the receiver, on the USB flash drive that works correctly. It sounds like that will work too. You can have music, video and still images all on the same drive. Once the image is saved onto the in-dash receiver, you can remove it from the USB flash drive. You can learn more about saving images onto a similar Pioneer in-dash receiver here: kzfaq.info/get/bejne/hcigfruo17Scpac.html You can learn more about playing back music, video, and still images from a USB Flash drive or SD Card here on a similar Pioneer in-dash receiver: kzfaq.info/get/bejne/gb2RjMmK0J-UeYk.html FYI - USB Port 1 used for Apple CarPlay and USB Port 2 used for Android Auto are clearly shown in this video: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html And in this one: kzfaq.info/get/bejne/r9WAeJqWq56YXWQ.html Setup for Wired Android Auto can be seen here on a similar 2 USB Port Pioneer receiver: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html You can find a full playlist of Pioneer How To videos with very similar operation to Pioneer AVH-W4500NEX here: kzfaq.info/get/bejne/rtygZZxilarVgac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

It sounds like the Pioneer AVH-Z9150BT is working correctly. Android Auto Wireless is available in the United States. Pioneer AVH-Z9150BT is an Australian model in dash receiver. Pioneer Australia makes no mention of Android Auto Wireless on the website. I recommend contacting Pioneer Australia for more informaiton: www.pioneer.com.au/contact-us/

The Pioneer AVH-Z5250BT works with Android Auto with a Wired Connection through USB. The Pioneer AVH-Z5250BT does NOT work with Android Auto Wireless. You can learn more about using Android Auto through USB here: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html You can find a full playlist of How To videos about Pioneer NEX in-dash receivers with very similar operation to AVH-Z5250BT here: kzfaq.info/get/bejne/hcigfruo17Scpac.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

When using a wireless connection for Android Auto, your phone is using it's WI-FI connection to communicate with the in-dash receiver. It does not use Bluetooth for this main connection. If you can use apps like, waze or google maps for navigation, or Pandora, or Sptify for music, that internet data is coming through your phone using it's cell phone data plan. Not through Wi-Fi. This is normal operation for an in-dash receiver and phone with a wireless connection to Android Auto. You can find more How To videos for in-dash receivers with very similar operation in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html Please be sure to install the latest firmware for your Pioneer AVH-W4400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

As of 2019 February, I'm not aware of any phones, other than Google Nexus and Pixel phones, that work with Android Auto Wireless. Android version 9 (PIE) installed on the phone or not. Phone makers (LG, Samsung, Motorola, etc...) must enable Android Auto Wireless on the phone for it to work. Android Auto with a wired connection works great on many phones today. You can see it work here: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Are you in the US? What phone are you using? What carrier are you using? What version of Android OS is installed on the phone? What version of Android Auto is installed on the phone?

Yes in the US. Have a Samsung Note 8. Have the 8.1 update on the phone and 3.1 on the Android Auto app.

Samsung has not activated Android Auto Wireless on it's phones as of 3 July 2018. When Samsung activates Android Auto Wireless on it's versions of the Android OS it will be able to connect to the in dash receiver.

I'm in France and I have a nexus 6P. How do I know if Android auto wireless is working ? I still cannot cast my phone to the receiver neither, each time I try to connect I get connection failed like others. My nexus runs 8.1 and I have android auto 3.4. The wireless android auto is mentioned in the user's manual. I don't understand why the screen mirroring doesn't work neither ? I suppose that it first request that the device is connected wireless and that the connection process mentioned above has to succeed / complete ?

I recommend you contact Pioneer Europe.

The Pioneer AVH-4200NEX / AVH-4201NEX uses a wired connection for Android Auto through USB port 2 and a wired connection for Apple CarPlay through USB port 1. There is no wireless connection for Android Auto or Apple CarPlay for the Pioneer AVH-4201NEX. You can find more information about connecting the Pioneer AVH-4201NEX to Android Auto here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html and you can find more videos on Pioneer's You tube Channel here: kzfaq.info

On Pioneer AVH-Z9200DAB, Android Auto requires a wired connection through USB. You can find more videos on Pioneer's KZfaq Channel here; kzfaq.info

As of 2019 January LG has not enabled Android Aotu wireless on their phones. It's possible Android version 9 will bring wireless operation. You can see Android Auto wired operation here kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html

As of 2019 March, Samsung has not enabled Android Auto Wireless on it's phones. When Samsung makes this feature available it will work with the Pioneer in-dash receiver. For the Wired version of Android Auto, I recommend to start the pairing process from the beginning. Start by deleting the phone from the in-dash receiver's Bluetooth Memory and do a system restore on the in-dash receiver. You can see this on a similar model here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html Also delete the in-dash receiver from the phone's Bluetooth Memory and very importantly, Restart The Phone. On the phone Make sure you have the latest version of the Android Auto App installed. On the Android Auto App, when it's not plugged into the car, be sure to remove all vehicles from the Android Auto Memory to start over. Plug in through USB Port 2. Don't use USB Port 1. You can see Android Auto Wired setup on a similar receiver here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html Follow the set up instructions on screen.

What model of in dash receiver? Are you in the US? On the phone forget any Bluetooth connections or wireless connections to the in dash receiver. In the Android Auto App, Forget All Cars and turn the phone off. On the in dash receiver do a system restore, you can see system restore in this video: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html Turn on phone and Plug In to in dash receiver through USB 2. You will have to go through Android Auto Set Up on phone. Unplug the phone, go to in dash receiver home screen and select your phone.

Android Auto works in the US and many other countries. Please be sure, Android Auto operates in your country with a locally sourced phone. I'm not aware of a reason the new phone will not work with the AVH-2440NEX. I recommend to use the USB cable that came with the new phone to make the connection. The Pioneer AVH-2440NEX will connect to your Android based phone for Android Auto operation with a Wired Connection through USB. You can see a video for very similar operation here: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html Please note: the Pioneer AVH-2440NEX will connect to Android Auto through USB. It does not use a wireless connection for Android Auto. Please be sure to have the latest firmware for your Pioneer AVH-2440NEX installed. You can find it here: www.pioneerelectronics.com/PUSA/Car/DVD+Receivers/AVH-2440NEX#downloads Once you have the latest firmware installed. I recommend to restart your phone. Then plug it in through USB to begin the Android auto set up process. You can find more videos about Pioneer AVH-2330NEX, very similar to 2440 here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

@@deckerdotto6035 thanks Deckerd that info should keep me busy for a while. The previous phone was S8 purchased and installed in US worked perfectly including here in Panama but was in fact connected always by USB. I don't mind that, it's OK but could not make new connection with the S10e purchased here in Panama. I suspect you are correct regarding firmware updates this phone has only been out for maybe 6 months if even that long. My other thought was to return the S10e cost $650 then buy a brand new S8 on Ebay for $300 or so unlocked version same as previous I got from Best Buy at home. That one worked OK but I did get some occasional messages like NO Device but I would just restart phone seemed to cure that problem. Is there possibly a BETTER phone I could buy for use with the AVH 2440 NEX that you could recommend? It's not realistic to think Pioneer will keep up with so many new phones coming out every other week I believe. I tried to call Pioneer CS in USA yesterday, but Panama phone said "no such number." Strange because I call US frequently never experienced this before? Having my electronics including my ONLY key for Subaru Outback stolen has been an incredible problem! Subaru refuses to release 8 digit key code unless I physically go to a USA Subaru dealer and provide documentation, they flatly refuse to cooperate with Subaru dealer anywhere outside USA telling me that's "illegal." Lesson learned always have another key but thieves probably would've taken both anyway...Also now Express VPN keeps uninstalling itself on my new laptop for some weird reason and I have to contact them each time to get it back. Stuff was stolen 1 week ago now I've spent entire week attempting to fix multiple issues with tech...

This video was made for the North American market. Google developed and controls Android Auto and Android Auto Wireless. You know the wired version works, but, has Google made Android Auto Wireless available in the UK? www.android.com/intl/en_uk/auto/ You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

I recommend to press the microprocessor reset button on the in-dash receiver. You can find the microprocessor reset button on Pioneer AVH-W4500NEX on the hard key panel to the far right beside the eject button. You'll need a paper clip or some other small point to press the microprocessor reset button. Please be sure to install the latest updates to your phone's OS and to download and install the latest version of Android Auto. And restart your phone. Samsung must enable Android Auto Wireless on the phone in order for it to connect to the in-dash receiver. If Samsung has not enabled Android Auto wireless on your phone you may want to consider this set up to make it work. mspoweruser.com/tutorial-how-to-setup-wireless-android-auto-on-non-google-phones/ If this issue persists, I recommend to erase all phones from the in-dash receivers Bluetooth memory. You can see how to do that here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html Next do a System Restore on the in-dash receiver. You can see it here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html Next, delete the in-dash receiver from your phone's Bluetooth memory. Delete all connected vehicles from the Android Auto App on your phone. Then start the pairing process from the beginning. You can find more How To videos with very similar operation to Pioneer AVH-W4500NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/rtygZZxilarVgac.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

@@deckerdotto6035 I know that this is late, but since my phone is an S8 active that they stopped updating at android 9 so the admin setting worked a treat for me. THANK YOU SO MUCH I looked all over and this is the only thing that worked!!

As of 2019 January, Samsung has not enabled Android Auto Wireless on your Note 9. Android Auto Wireless works with Google Phones, Pixel3, Pixel2. Updating the firmware on the in-dash receiver is a good idea, but it WILL NOT enable Android Auto Wireless on your Samsung note 9. Only Samsung can do that. It's possible that Android version 9.0 (Pie) and higher will bring Android Auto Wireless operation to more phones. That is up to Samsung. Until that time, I recommend the wired version of Android Auto using USB port 2. You can see it work here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html Before you go with Alpine or Jensen, you may want to do some research and find out if the Samsung Note 9 is supported on those systems for Android Auto Wireless. You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Pioneer makes many full wireless Android Auto receivers. In the video above, one of the possible initial setup options for wireless Android Auto is to plug in your phone. It's a one time only thing. This helps the phone and receiver to recognize one another for the first time. Wireless Android Auto is automatic from that point forward. For full wireless Android Auto please consider the Pioneer DMH-W4660NEX seen here: kzfaq.info/get/bejne/eJiEh8l7uqqRlac.html or the Pioneer DMH-WT8600NEX seen here: kzfaq.info/get/bejne/h9imgc54zLjTZ3k.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

@@pioneerelectronics I have the NEX...I finally figured out how to use the AA wirelessly.. 😂

As of 2019 April Samsung has not enabled Android Auto Wireless on it's phones. When Samsung enables Android Auto Wireless on it's phones the Pioneer AVH-W4400NEX is ready to operate as shown in the video above. Please remember you can use the wired version of Android Auto until Samsung makes this available on your phone. You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

I'm not aware of a way to set any sort of default. However, the Pioneer receiver will come back to the source it was on when the vehicle was switched off. Please try choosing the FM radio source before switching the vehicle off. You can choose the FM radio source even when the receiver is connected to Android Auto. When the vehicle is started again, it will come back to the FM radio source. You can find more videos about Pioneer NEX in-dash receivers here: kzfaq.info/get/bejne/rtygZZxilarVgac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

On Pioneer's web site for Europe, the AVIC-Z920DAB makes no mention of Wireless Android Auto. Take a look here: www.pioneer-car.eu/eur/products/avic-z920dab I recommend to use a wired connection for Android Auto through USB. Please be sure to use USB Port 2 for Android auto. USB port 1 is used for Apple CarPlay and will not work for Android Auto. Please be sure to use USB Port 2 for Android auto You can see video of a similar Pioneer receiver here: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html You can find more How To videos with very similar operation to Pioneer AVIC-Z920DAB here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

As of 2019 April, Samsung has not enabled Android Auto Wireless on it's phones. When Samsung makes this feature available it will work with the Pioneer in-dash receiver. For the Wired version of Android Auto, I recommend to start the pairing process from the beginning. Start by deleting the phone from the in-dash receiver's Bluetooth Memory and do a system restore on the in-dash receiver. You can see this on a similar model here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html Also delete the in-dash receiver from the phone's Bluetooth Memory and very importantly, Restart The Phone. On the phone Make sure you have the latest version of the Android Auto App installed. On the Android Auto App, when it's not plugged into the car, be sure to remove all vehicles from the Android Auto Memory to start over. Plug in through USB Port 2. Don't use USB Port 1. You can see Android Auto Wired setup on a similar receiver here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html Follow the set up instructions on screen. You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

I recommend to stop the car, engage the parking brake and check the phone. This is a one time, first time process set up process. After you've set up the phone / in-dash receiver system, you won't see that screen again. You can find more videos about Pioneer in-dash receivers and Android Auto here: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

For Pioneer AVH-W4400NEX, Android Auto works on USB Port 2 only. Not on USB port 1. To test, plug your USB cable directly into the back of the in-dash receiver USB port 2. Do not use an extension. You can see the back of the Pioneer AVH-W4400NEX in this video: kzfaq.info/get/bejne/es1jf7eTzMrDj58.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

@@deckerdotto6035 The deck is hanging out. I am plugged direct. No extension. I got CarPlay to work both wired and wireless. Just not AA.

Please confirm you are using USB port 2 for Android Auto. This is not the same USB port you are using for Apple CarPlay. Android Auto Wireless will not work on your Samsung phone until Samsung enables Wireless Android Auto on the phone. If Android Auto is still not working, I recommend this process: On the phone, delete the in-dash receiver from the phone's Bluetooth memory. Also on the phone, when not connected to the in-dash receiver, open the Android Auto App and delete all known vehicles from the Android Auto App. Next, Delete the Android Auto app from the phone. Restart the phone. Download the Android Auto app and install again on the phone. On the in-dash receiver, delete all phones from the Bluetooth memory. Do a microprocessor reset by pressing the small reset button on the hard key button panel. You'll need a paper clip or some other small point to press the microprocessor reset. Next do a Restore All Settings: You can see Restore All Settings on a similar receiver in this video: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html When the system restore is complete, be sure Android Auto, Auto Launch is switched on. You'll find this in the system menu. When this is complete, plug the phone into USB port 2. Do not use USB port 1.

What are the actual requirements to use wireless Android Auto. AFAIK only Google branded devices like the Pixel series works but no other phones even if they are running Android 8+. Is there a regional issue with this for example this will only work if you physically live in the US? I have tried non-rooted Pixel phones with no luck. Even tried other brands running Android 9 but nothing. I do not live in the US though.

You stated you do not live in the US. Check with Google to see if Android Auto Wireless is available in your country. Just because the Wired version of Android Auto works, that does not mean the Wireless version will work, if Google has not switched it on in your area. The requirements for Android Auto Wireless are listed in the video here: kzfaq.info/get/bejne/r9WAeJqWq56YXWQ.html In the US, as of 2019 May, only Google Phones work with Android Auto Wireless. Other phone makers such as Samsung, LG, Motorola, etc.. have chosen to not enable Android Auto Wireless on their phones. The wired version of Android Auto works fine on many phones. This is not a trouble with the in-dash receiver. This is a decision of the phone makers to not support Android Auto Wireless. You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

What Pioneer in-dash receiver model number do you have? You can usually find the model number printed on the face of the in-dash receiver near one of the corners. Does your in-dash receive work with Android Auto Wireless? Do you have the Android Auto App installed on your phone? Android Auto wireless works in the US. It may not work in other areas of the world. Do you know if Motorola has enabled Android Auto Wireless on your phone? If you are in the US, If Motorola has not enabled Android Auto Wireless on your phone you may want to try this: mspoweruser.com/tutorial-how-to-setup-wireless-android-auto-on-non-google-phones/ You can find more How To videos with very similar operation to Pioneer AVIC-W8500NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/rtygZZxilarVgac.html Be sure to install the latest firmware for your Pioneer AVIC-W8500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVIC-W8500NEX#downloads You can find more videos on Pioneer's You Tube Channel here: kzfaq.info Show less

@@deckerdotto6035 im in the US and i have a pioneer avh wireless 4500w nex and i do have the android auto app i just Barry but this product two days ago

There is no trouble with the Pioneer AVH-W4500NEX. It's operating normally. The reason it won't connect wireless for Android Auto is because Motorola has not enabled Android Auto Wireless on your phone. If Motorola has not enabled Android Auto Wireless on your phone you may want to try this: mspoweruser.com/tutorial-how-to-setup-wireless-android-auto-on-non-google-phones/ If you are thinking, I'll return this thing to the store and get another brand that will work with my phone, please do some research before you do it. You'll find that your phone won't connect to any brand of in-dash receiver for Wireless Android Auto at this time. It's the phone, not the in-dash receiver. The other option is to use Android Auto with a wired connection through USB Port 2. Don't use USB Port 1, it will not work for Android Auto. You can see it here: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html When Motorola enables Wireless, you'll be able to use it. You can find more How To videos with very similar operation to Pioneer AVH-W4500NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

@@deckerdotto6035 hey man thank you so much by some of your videos you sent me i finally found a way to connect wirelessly to my pioneer thanks you so much for your help 👍

Please be sure your phone is not connected to another device such as a headset or a portable speaker. This can block the in-dash receiver from connecting. Also, please be sure the old phone is not connecting to the in-dash receiver. This can block the new phone from connecting. The Pixel 6 should work with the AVH-W4400NEX for Wireless Android Auto. Please follow these steps to get the two working together. Please read this complete post before proceeding. First, with the vehicle safely parked and the parking brake engaged, I recommend to delete all phones from the in-dash receiver's Bluetooth memory. You can see it on a similar Pioneer receiver in this video: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html Next, press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the receiver's microprocessor reset button. You can find the microprocessor reset button on the AVH-W4400NEX on the hard key panel to the far right beside eject. Next, be sure you have the latest firmware installed on the in-dash receiver. If you need to update the firmware, you can find the latest firmware for the AVH-W4400NEX here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads If you have the latest firmware installed, I recommend to do a Restore Settings on the receiver. You can see this in this Pioneer How to video: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html After the firmware update has been installed: Delete the in-dash receiver from the phone's Bluetooth memory. And if possible, delete the in-dash receiver from the phone's Android Auto car list. Next, Restart the phone. Next, Begin the process of connecting your phone to the receiver for Android Auto as shown in this Pioneer How To video: kzfaq.info/get/bejne/r9WAeJqWq56YXWQ.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

@@pioneerelectronics Followed everything, still does not Auto-Launch. The only difference when doing the initial setup for it (from this video at 4:21) my phone doesn't go into that setup like my Pixel 3 did. On the Pixel 6 it just connected to Android Auto right away without a setup. And I noticed the Pixel 6 has a "driving mode" which I tried turning off and on to see if it made a difference. Looks like I'm out of luck unless I try a newer model and see if that's the problem. Thanks for the reply though!

@@casanovaxjr Please clarify your question. Are you saying wireless Android Auto does not work at all? Or, Wireless Android Auto will not Auto Launch? Please confirm the firmware version that is installed on your Pioneer AVH-W4400NEX.

Your Samsung phone will not connect for Android Auto Wireless because Samsung has not enabled Android Auto Wireless on it's phones as of September 2018. For now, a wired connection for Android Auto is available. This will also charge your phone when connected. When Samsung enables Android Auto Wireless on your phone it will work with your in dash receiver. Wireless mirroring is available for your phone using the Miracast standard. You can find more videos about the Wired Version of Android Auto here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html

My understanding is that when the S8 and S9 receive Android 9.0, Android Auto Wireless should be good to go.

As of October 2018 many phone makers (Samsung, LG, etc...) have not enabled Android Auto Wireless on their products. If you have one of those phones, I recommend to use Android Auto with a wired connection. You can see it here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html As the phone makers enable Android Auto Wireless on additional phones it will work on your Pioneer in dash receiver. You can see more videos about AVH-W4200NEX here: kzfaq.info/get/bejne/es1jf7eTzMrDj58.html

I recommend to restart your phone and try again. If this does not correct the issue, I recommend to press the microprocessor reset button on the in-dash receiver. You'll need a paperclip or some other small point to press the microprocessor reset button. I don't know what Pioneer receiver you have so I can't tell you where to find the microprocessor reset button. I recommend to install the latest firmware for your Pioneer in-dash receiver. You can find more videos about Pioneer NEX in-dash receivers here: kzfaq.info/get/bejne/gb2RjMmK0J-UeYk.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

An older phone like a Galaxy 8 may not work with Android Auto Wireless. Please watch this video for connecting your Wi-Fi and phone to the receiver: kzfaq.info/get/bejne/ebuiq8mYp9-WcoE.html If your Galaxy 8 still will not make a wireless connection for Android auto, you can try this: mspoweruser.com/tutorial-how-to-setup-wireless-android-auto-on-non-google-phones/ You can find more videos about Pioneer DMH-W4600NEX here: kzfaq.info/get/bejne/g66Hirl4m5eyoYE.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

What Pioneer in dash receiver model number would you like to update? If you tell me the model number I will point you toward the update information.

Deckerd Otto avicw 8400nex

No firmware update is available for AVIC-W8400NEX as of 8/24/2018.

Thanks a lot for your help!

As of 2019 February I'm not aware of any additional phones working for Wireless Android Auto other than Google Pixel and nexus. Other phone makers (Samsung, LG, etc.) have not enabled this wireless Android Auto capability on their phones. The wireless Android Auto capability built into the phone is up to the phone maker. Android Auto is available for many different phones with a wired connection today. You can see Android Auto with a wired connection here: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

@@deckerdotto6035 Thanks for your response. So my wait for a new headunit and a new phone continues further :-(

tested with galaxy s9 with android 9 pie update...still get connection failure on wireless android auto.when can I ditch the cable? this sucks.

When can you ditch the cable? Ask Samsung. It's up to them. Samsung needs to enable Android Auto Wireless on your phone.

The Pioneer AVIC-W8500NEX did not stop working for Android Auto Wireless. Your new phone has stopped it from working. Did you install the Android Auto App on the new phone? Has Samsung enabled Android Auto Wireless on the new phone? If Samsung has not enabled Android Auto Wireless on the new phone you may want to try this: mspoweruser.com/tutorial-how-to-setup-wireless-android-auto-on-non-google-phones/ You can find more How To videos with very similar operation to Pioneer AVIC-W8500NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/rtygZZxilarVgac.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

You never need to input a WI-FI password to connect with Android Auto Wireless. The phones that work with Android Auto Wireless as of September 2018 are all Google Phones. Pixel and Pixel XL, Pixel 2 and Pixel 2 XL, Nexus5X and Nexus 6P. Other phones must use a wired USB 2 connection for Android Auto. When Android Auto Wireless is enabled on your phone it will work with your Pioneer in dash receiver. If you are not in the US, Android Auto Wireless may not be active in your country. You can find more videos about Pioneer AVH-W4400NEX here: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html

Right on...thanks for the reply. I'm currently using the One Plus 6T. I'll keep an eye out for any firmware updates that my bring me into the fold. Sad...but I have hope.

As of 2018 October, Samsung has not enabled Android Auto Wireless on your phone. At this time, I recommend using a Wired Connection for Android Auto. You can see a video here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html When Samsung enable Android Auto Wireless on your phone, you'll be able to set up the Wireless Connection for Android Auto.

@@deckerdotto6035 thanks for the reply.

I recommend to start from the beginning. With the phone not connected to the receiver, delete the receiver from the phone's Bluetooth Memory and go into Android Auto and delete all receivers or vehicles from the phone's Android Auto memory. Restart the phone. On the in-dash receiver, I recommend to delete all phones from the receiver's Bluetooth Memory. I recommend to do a System Restore on the receiver. You can see it here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html After the system restarts, press the receiver's microprocessor reset button. You'll find the microprocessor reset button on the Pioneer AVH-W4400NEX on hard key panel to the far right. Make sure no devices are connected to the in-dash receiver, and make sure no other Bluetooth devices like a headset or portable speaker, are connected to the phone. Once that is complete begin the Android Auto Wireless pairing process from the beginning as shown here: kzfaq.info/get/bejne/r9WAeJqWq56YXWQ.html

@@deckerdotto6035 I'll give this a try this weekend hopefully

What is the model number of your Pioneer in-dash receiver? In what country are you using this product? When using Android Auto Wireless on a Pioneer in-dash receiver, the phone is connected to the in-dash receiver through a Wi-Fi connection. When you drive the vehicle, all data for navigation, or music streaming services, or any other app, will be delivered to the phone from the local cellular service provider data plan. This is the basic operating principle of Android Auto Wireless. The phone must be able to have a Wi-Fi connection and to use it's cellular service data plan at the same time. You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

@@pioneerelectronics This is the AVH-W4400NEX model with a maestroRR used in a 2013 US Mustang but we are in France. We have understood the operating mode well but unfortunately when we are connected by wifi all the applications tell us that they do not have a network. We were previously connected via USB and have been doing so for 3 months without any problems, but for the past 15 days when we connect the phone via USB we have systematically had the message "no answer". We tried with several usb cables and 2 different telephones, reset the car radio etc. we still have this message and cannot use android auto. Thanking you for your help and hope I can get android auto to work properly.

I recommend to go back to the USB connection type for Android Auto. Since you've created an Android Auto Wireless connection the receiver will automatically default to that type of connection if possible. Plugging in the USB will only charge the phone with a Wi-Fi connection. You'll need to make it seem as though the phone and the receiver have never seen one another before. Please follow these steps to get back to a wired connection for Android Auto. 1. Delete all phones from the in-dash receiver's Bluetooth Memory. You can see this on a similar receiver here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html Next, do a Restore Settings on the receiver. You can see this on a similar receiver here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html 3. When the receiver restarts choose the appropriate Language and Standard Mode or Network Mode based on your system setup. Most people use Standard Mode. Next press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-W4400NEX at the far right of the hard key panel. Allow the receiver to restart. 5. Next be sure to switch the vehicle off and receiver off while setting up the phone. On the phone, I recommend to delete the in-dash receiver from the phone's Bluetooth memory. 6. Check the phone's Android Auto App. If possible, delete the vehicle/in-dash receiver from the Android Auto memory on the phone. 7. This is important. Restart the phone. After the phone restarts, it's time to start the vehicle and let the receiver power up as normal. Plug the phone into the receiver's USB 2 port. The Pioneer AVH-4400NEX has 2 USB ports. Please be sure to USB port 2 for Android Auto. USB port 1 will not work for Android Auto, After you plug the phone in through USB port 2, you may see a message saying "do you want to use a wireless connection for Android Auto?" decline the wireless connection option. If you have additional questions about the operation of Android Auto in France, I recommend to contact Pioneer Europe for support. You can find them here: www.pioneer-car.eu/eur/support

@@pioneerelectronics We have followed your procedure scrupulously but unfortunately in USB we always have the message "no response" ... The data does not work when we are connected in wifi we have therefore unfortunately invested in an unusable car radio :-(

I recommend to delete the Android Auto app from your phone. Next, restart the phone. Next, download and install the Android Auto app to the phone again. Plug the phone into USB Port 2 on the receiver. Don't use USB port 1 it will not work. Use USB port 2 for Android Auto. Please be sure the cable you are using is a proper high quality cable capable of carrying data from the phone. Just because the phone will charge does not mean the cable is carrying data to the receiver and back to the phone. The cable that came with the phone is the best option. Here is a video about connecting your phone for Android Auto: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html

What model number of Pioneer in-dash receiver do you have? You can usually find the model number near one of the corners of the face of the in-dash receiver? If you are using a Pioneer Wireless NEX in-dash receiver and you want Android Auto to work with a wired connection, you'll need to connect to USB Port 2. Android Auto does not work on USB Port 1. You can see this on a similar Pioneer in-dash receiver here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html You can find more How To videos with similar operation for Pioneer AVH-W4400NEX in the Pioneer Playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html Please be sure to install the latest firmware for your Pioneer AVH-W4400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

What is the model number of your Pioneer in-dash receiver? What is the phone you are trying to connect?

On this in-dash receiver USB Port 1 is used for Apple CarPlay and USB Port 2 is used for Android Auto. You can find more videos of with very similar operation here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Please remember, Google developed and maintains Android Auto wired and wireless. Google also determines how all aspects of Android Auto operate. That includes the audio functions from the connected phone. When using Android Auto Wireless, all audio connections to the phone can be through WI-FI. On a Pioneer AVH-W-NEX in-dash receiver, when you are using Android Auto Wireless or Apple CarPlay Wireless, the WI-FI Audio Source becomes available. Please note, when using a Pioneer AVH-W4400NEX, or AVIC-W8400NEX, you have the options of using USB Port 1 or SD card as a source to play back FLAC Files up to 24 bit. You can see the USB Ports and SD Card Slot here: kzfaq.info/get/bejne/ZtaUfdR_rra0nIE.html When using the SD Card or USB port 1 as an audio/video source, you can still use Android Auto wired or wireless. This is a good thing because, the audio source will be independent of the phone. You can see this operate on a similar in-dash receiver here: kzfaq.info/get/bejne/gb2RjMmK0J-UeYk.html When using Pioneer AVH-W4400NEX or AVIC-W8400NEX, you will not have the same file capacity restrictions seen in the linked video. You don't need to suffer through the horror of abysmal Bluetooth compression on your FLAC files while using Android Auto with a wired connection. Simply copy some or all of your FLAC files to a USB Drive or SD card and enjoy your music. If you leave the SD card or USB drive in your vehicle and it will always be there ready to go. You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

First for the wired connection. Please be sure you are using USB Port 2 on the AVH-W4500NEX. There are 2 USB ports on the back of the AVH-W4500NEX. You can see it here: kzfaq.info/get/bejne/Y7CZl9aBtbyvnnU.html USB Port 1 is for Apple CarPlay and will not work for Android Auto. You must use USB port 2 for Android Auto. Also very important, please be sure to use a high quality USB cable connected directly to the back of the in-dash receiver. A $1 gas station USB cable won't work. Just because a USB cable will charge the phone does not mean it will carry the data necessary for Android Auto to operate. Are you plugging the phone directly into the back of the receiver? Or are you using a factory USB port or some other USB port somewhere in the vehicle? A direct connection to the in-dash receiver is required. Here is a video about connecting wired Android Auto to AVH-W4500NEX: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html I recommend to press the microprocessor reset button on the AVH-W4500NEX. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-W4500NEX on the hard key panel to the far right. Please restart your phone. For the wireless connection for Android Auto, please be sure your phone is not connected to another device like another vehicle, a headset, or portable speaker. This can block the in-dash receiver from connecting. I recommend to delete all phones from the in-dash receiver's Bluetooth Memory. You can see it here: kzfaq.info/get/bejne/sMCCdJuks-Cal6c.html Next I recommend to press the microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-W4500NEX on the hard key panel to the far right. Next I recommend to do a Restore Settings. You can see it here: kzfaq.info/get/bejne/hbN6aNx7m5eZZ5s.html Next, delete the AVH-W4500NEX from the phone's Bluetooth and Android Auto Settings. Next restart your phone. Be sure your phone is not connected to another device. Now begin the Android Auto Wireless setup process from the beginning. You can see it here: kzfaq.info/get/bejne/r9WAeJqWq56YXWQ.html Please watch the video with the sound on. You can find a full playlist of How To videos about Pioneer NEX in-dash receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html and you can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

What is the model number of your Pioneer in-dash receiver?

@@deckerdotto6035 thanks my phone just needed another upday

So the memory card for the stereo became corrupt. Woohoo. Got it fixed. Same phone same stereo. Wont connect. I followed your instructions to a T. Get to the same point as mentioned above. Phone says android auto comection available but if i touch the icon on the stereo it trys to connect but never does. Just fought with this about 2 hrs. Tried restarting phone and stereo. Deleting phone and re connecting. Deleted all android auto and reinstalled on my phone. Nothing works...

It is avh-w4400nex

Please clarify. The receiver is AVH-W4400NEX and the phone is LGV60. Have this phone and this receiver been connected and working with Android Auto Wireless at a previous time? Or this phone and receiver combination have never been able to connect with Android Auto Wireless? Please be sure the receiver has firmware v 1.02. If you need to install the firmware, you can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads

Please note, this decision is up to Samsung and other phone makers. The Pioneer in-dash receiver will operate with Android Auto Wireless on a properly configured phone. You have some other options for Android Auto. First is the wired version of Android Auto. Be sure to use USB Port 2 on the in-dash receiver. This will charge your phone. You can see it similar operation here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html Another option for Android Auto is to use wireless screen mirroring. Install a screen mirroring app on the phone from the Google Play store. Be sure the app supports the "Miracast" Standard. This is very important. The app must support the "Miracast" Standard. Connect the phone to the in-dash receiver through the screen mirroring app and start the Android Auto App on the phone. You can find more videos of Pioneer AVH-2300NEX, very similar in operation to AVH-W4400NEX in this playlist: kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info