Just what i needed to know. Thank you. Mahalo from Hawaii. I had 1 wrong wire on my botton. U solved my problem. Be Blessed

The wires on the other side check the colors on the wire inside the switch box so you should have three wires for the turn signal one will be hot and the other two will be left and right. For the headlight and low beam and high beam you will haveone hot wire that'll be always connected to your low beam wire and then you need a switch so you can connect the high beam wire.there is two wires that are connected together for the high-beam because one goes to the high beam light indicator and the other goes to the high beam light bulb

@@maestroscustomsgregorygara7624 Very good of you to reply, thanks. I use my bike every day for work, but am seriously thinking of doing some proper modification to it - especially the ugly fenders!! Cheers from Barcelona :)

So if you just want the starter switchthen yes this is all you have to do and you don't have to do nothing on the other side.

Maestros Customs Gregory Garay yeah man I installed some 7/8 clipon bars and a single cable throttle and I need to relocate the start switch to loose the bigass control unit that I wasn’t able to fit to the bars even with some spacers. It kept moving when accelerating. Thanks for the help bro!

@@vladfaur3442 just another idea that I did was when I bought the clip-on bars they came 7/8 inch. So what I did was I bought bicycle seat postsand it is 7/8 in in the tip and the rest of the bar is 1 in. Now everything will fit perfect!

Maestros Customs Gregory Garay Damn! If I’d knew that before would of saved me from a lotof trouble lol I changed everything to 7/8

@@vladfaur3442 that sucks but now you know. I give you props on figuring out how to change everything out though.

Connect the positive to the yellow and red wire?

No bro. Ones for the switch and the other is for the speedo. The yellow is the starter wire

So I couldn't comment on the you did on my other video. But I use the high heat and then the gloss black epoxy with the 2K clear. That'll give you that deep black

@@maestroscustomsgregorygara7624 my bad bro , I deleted the comment becuase I didn't want to hit you with too many questions. So I should connect the speedo positive wire to the blue/white and red and black wire? Gloss on top of gloss epoxy hell yea! Your technique comes out SUPER clean. Im going to try that with some vht epoxy

@@maestroscustomsgregorygara7624 Here's the aero that I'm working on that you 100% inspired kzfaq.info/get/bejne/Z7BofdNivLKnf30.html