the fact that this video has 1 million views shows how bad vscode is at telling the user basic functionality
@shivakumar-lv6wr2 жыл бұрын
Absolutely!, This was super simple!
@Player-fx3vt2 жыл бұрын
Hmmm, that getting started page with links to documentation and learning the fundamentals about it. I don't think that's telling you that stuff at all .
@ytg66632 жыл бұрын
Clearly You are Gey👍
@chairmanmao1122 жыл бұрын
2.365786 million*
@nomankhan71902 жыл бұрын
Right.
@divyanshsati11164 жыл бұрын
For people who are unable to get the output, save your code with ctrl s, and then run!
@rafaelfernandez7254 жыл бұрын
you saved me
@LearningLad4 жыл бұрын
thank you for the comment
@user-bb6si1et1k4 жыл бұрын
helpful
@ROSSB1774 жыл бұрын
oh my thank you so much...i.I was going crazy
@siddharth97034 жыл бұрын
Yo thank you bro same here thanks very much🤩🤩🤩🤩🤩
@pratikanand51612 жыл бұрын
This is a great tutorial, I was stuck on configuring VS Code for C/C++ for hours and this video was very simple and easy to follow. Thanks a lot for the simple tutorial, it really helped a lot. Everything went smooth and VS code works perfectly!
@1mol831 Жыл бұрын
Code runner doesn't work for my version, I'm just using another method instead. Even notepad is easier.
@Nuggz_TV3 жыл бұрын
Dude fucken finally I missed a whole class trying to follow someone else and with you it was smooth as butter, thanks man
@LearningLad3 жыл бұрын
Pleasure
@wotizit2 жыл бұрын
nws
@kshau_2 жыл бұрын
Don't curse.
@blubbermammoth84262 жыл бұрын
@@kshau_ I don't think the internet is the place for you then mate.
@kshau_2 жыл бұрын
@@blubbermammoth8426 Shut up.
@Alex-co4hx4 жыл бұрын
Man you're a life changer. You made everything 10 times easier than it was shown in VSC's C++ installation guide.
@LearningLad4 жыл бұрын
glad that my video helped you :)
@eyeofthepyramid25964 жыл бұрын
@@LearningLad it shows me error: ld returned 1 exit status
@williammatiz97454 жыл бұрын
@@eyeofthepyramid2596 I don't know if you have figured it out yet but just in case, you need to save it before you run the program. Couple of ways to do it, but the easiest way is control + s. I got the same message you did and did the save thing, works well. I hope this helps!
@ArshdeepSingh-ix3bg3 жыл бұрын
@@LearningLad th cc++ extension is not working ,please help
@Alpha-uw6wn3 жыл бұрын
Sir where u live in India?
@zainabsyeda56444 жыл бұрын
This was unbelievably easy and it worked perfectly fine! I was breaking my head for two hours until i came across your video(s). Thank you so much for these tutorials.
@LearningLad4 жыл бұрын
You're welcome!
@aqtedarkazim9678 Жыл бұрын
shia
@midnari2 жыл бұрын
Alright, the fact that you popped immediately for a C/C++ Visual Studios tutorial after you helped me with MinGW means you get my subscription. You're, sir, are fantastic.
@Quiselott Жыл бұрын
Man I would have never gotten this without you! Professor didn't want to teach us how to setup VS Code. THANKS!
@LearningLad Жыл бұрын
glad my video helped you :)
@Scottylili3 жыл бұрын
you're a life saver it was driving me crazy (didn't know how to run the code so it accepts input)
@julianlutz42542 жыл бұрын
Thank you LearningLad for making this way quicker and easier than anything else I found! Just as a heads up in case anyone else runs into this: When I first got everything set up and tried to run the Hello World example, it threw this error: undefined reference to `WinMain' collect2.exe: error: ld returned 1 exit status All I had to do was save the file first by going File > Save and then it worked just fine.
@LearningLad2 жыл бұрын
most welcome :)
@Oskar-zt9dc2 жыл бұрын
Actually, it will be easier if you activate autosave
@LoradLP2 жыл бұрын
Thank you, that saved me from like 15 min of googling probably :)
@daisy667211 ай бұрын
Thanku so much
@synth-_-50935 ай бұрын
Thank you so much I thought I did something wrong was gonna watch all the vids back lol
@justbeagoodperson48263 жыл бұрын
Am I the only one who is getting ' cannot open source file "iostream" ' :'-( Solution please!!! Okay got the solution: First watch the video in the description of this video!!! Thanks man it worked :'-)
@amolmagar64683 жыл бұрын
"Iostream " such file not found but I already download extension plz help if you already solve it
@justbeagoodperson48263 жыл бұрын
@@amolmagar6468 Yeah delete all the downloads you did and do all the steps in the video again that might work 👍
@amolmagar64683 жыл бұрын
@@justbeagoodperson4826 I have resolved it. I was not given. Cpp extension for c++ file and also gpp instead of gcc.
@luisespinoza35623 жыл бұрын
Thank you!!! I'm just starting to code in c++ and my professor couldn't explain it as easily as you just did!!
@LearningLad3 жыл бұрын
You're very welcome!
@Mohitgamming77773 жыл бұрын
Thanks bhai tune to jindgi hi badal di.😂 pareshan ho gaya tha in online compilers se. Very very very thanks 🙏🙏🙏
@LearningLad3 жыл бұрын
glad this tutorial helped you :)
@FazriGading3 жыл бұрын
thank you so much for the Run in Terminal, i don't even know that earlier!!!
@LearningLad3 жыл бұрын
Welcome!
@utkarshaggarwal11102 жыл бұрын
after wasting my whole day on just this simple setting i repteadly installed and uninstalled my vscode thinking i am doing something wrong. and then finally i watched this video. thanks a lot man.
@LearningLad2 жыл бұрын
pleasure :)
@chiragthakur16922 жыл бұрын
THANK YOU SO MUCH, I WAS HAVING DIFFICULTY WITH THE INSTALLATION, AND YOU HAVE CLEARED ALL MY DOUBTS. AND NOW I'VE SUCCESFULLY CREATED MY FIRST CODE, ♥
@LearningLad2 жыл бұрын
Awesome Keep learning
@srilalitabhuvaneswarid2 жыл бұрын
4:38 but I am getting output like this... " 'gcc' is not recognized as an internal or external command, operable program or batch file." instead of hello world
@GiveBackGlory2 жыл бұрын
he did not tell how to install compiler to run code
@prog-255 Жыл бұрын
I got same thing
@ishu43702 ай бұрын
same here
@AnGhaeilge14 күн бұрын
You need to install MinGW
@abhishekchaudhary69753 жыл бұрын
Really helpful sir. I saw atlest 10 tutorials but none of them worked. Your tutorial series worked for me. Life saver!! I hope this channel crosses 1M subscriber soon. Such an underrated channel.
@LearningLad3 жыл бұрын
Glad it helped
@ScorchGod Жыл бұрын
thank you so much learning lad!! i was so lost in the installation guide of c++ from VS code
@LearningLad Жыл бұрын
You are welcome!
@kimvo49297 ай бұрын
This video saves tons of time! I had been struggling with compiling and running C in vscode for hours, and then I found this video. It's so helpful, straightforward. Thank you so much!
@LearningLad7 ай бұрын
Most welcome
@rockonthehill16184 жыл бұрын
I HAVE BEEN SEARCHING SO MUCH TIME FOR THIS. THANK YOU MAN, YOURE AWESOME
@LearningLad4 жыл бұрын
No problem!
@sakshamchaturvedi3 жыл бұрын
Thank you so much for this! In comparison to your video, other installation guides are just useless. Great work 💯
@LearningLad3 жыл бұрын
You're welcome!
@user-jb2ht1gr5y3 жыл бұрын
wow ,oh my. I have searched "many many" videos and articles to find this problem until I meet this! It's a very cool video just take 7mins. Thanks, that's very helpful .
@LearningLad3 жыл бұрын
Pleasure
@VaishnavP Жыл бұрын
This was the only video explaining about the " *Run in terminal* " setting. I was stuck in there.... Thank you so much
@LearningLad Жыл бұрын
You're welcome!
@user-jp8iu3je5z3 жыл бұрын
Thank you so much for this video!! Was having a hard time finding out how to put inputs into my code and you saved me :)
@LearningLad3 жыл бұрын
You are welcome!
@pradyumnapatil51903 жыл бұрын
THANK YOU! Can't tell you how much I have searched for the input issue.
@LearningLad3 жыл бұрын
Glad I could help!
@pranjaladhav96003 жыл бұрын
@@LearningLad I am still gettotn error😭
@HADEson_ Жыл бұрын
Finally I've installed it, I just started programming I just hope I'm going the right path, I'll Come back in a few months to tell how my learning is going
@LearningLad Жыл бұрын
All the best :)
@REVANTHGUNDAPPAGARI4 күн бұрын
for like this type of video solution I searched for 3 days
@LearningLad3 күн бұрын
Glad this video helped you
@BHANUPRATAP-wo7ch3 жыл бұрын
I was unable the input in c++. After seeing this video I am able to take input in c++ Thanks you sir
@LearningLad3 жыл бұрын
Awesome Keep learning :)
@vp41569 ай бұрын
Crystal Clear. Thank you Sir!
@LearningLad9 ай бұрын
You're welcome!
@Gospelwave5728 Жыл бұрын
Thank you, man. You just saved a brother from over 6 hours of brainstorming with no result.
@LearningLad Жыл бұрын
most welcome :)
@ritwikasasmal2580 Жыл бұрын
I was struggling to configure C/C++ with VS code for hours. thank you for making it so easy! :)
@LearningLad Жыл бұрын
welcome :)
@marjoriejohnson94213 жыл бұрын
this was great. fast and painless. Thank you so much!
@LearningLad3 жыл бұрын
You're welcome!
@alvarozs65383 жыл бұрын
This last part, run in the terminal, is just which I was looking for. Thank you so much.
@LearningLad3 жыл бұрын
You are welcome!
@ratikvarshney2 жыл бұрын
sir ,i was so tensed that my vs code stoped working for hours but after I watched your video I am able to work again .Thanks a zillion sir.
@LearningLad2 жыл бұрын
Pleasure
@tahakarakas39832 жыл бұрын
i have watched tons of videos about my error none of these videos helped and you fixed perfectly thank you soo much
@LearningLad2 жыл бұрын
pleasure :)
@sonochinos2 жыл бұрын
Thank you for this great tutorial! For those who get the error "undefined reference to `WinMain' collect2.exe: error: ld returned 1 exit status" Remember to save your file with ctrl-s before running your code. You can go into extensions and into Code Runner to change the extension's settings Look for Code-runner: Save file before run and tick "Whether to save file before running"
@devanshkmishra2 жыл бұрын
thanks a lot!!
@qwertyman5063 жыл бұрын
Thank you so much!!! By the way, if anyone can't find the "Run code configuration" on the left side, type in "Run code" in the search bar. "Extensions" should show up, and under it will be the run code configuration option. It seems that's changed since this video was published.
@LearningLad3 жыл бұрын
Thank you for posting this :)
@Vule_202 жыл бұрын
I don't get anything popping up when I type "Run code" in the search bar, it doesn't reveal The Run code configuration option under "Extensions"
@niccolosancisi19202 жыл бұрын
After watching so many useless guides I finally found this video! Thank you so much it's all working and functioning now!
@LearningLad2 жыл бұрын
You're welcome!
@thang.d23822 жыл бұрын
Thank you so much for the help. I don't know why people clicked on the dislike button when the video is very helpful. Maybe the accent is hard to understand sometimes but I don't care actually. Just focusing on the result. IT WORKS 100% SURE - you got a big thumbs-up from me bro
@LearningLad2 жыл бұрын
Thank you
@neidagarza83452 жыл бұрын
This was SO helpful thank you so much!! I spent like 5 hours not realizing I needed a code runner extension 🤦🏽
@LearningLad2 жыл бұрын
Pleasure
@rajakumarhinchageri53272 жыл бұрын
gubad
@rajakumarhinchageri53272 жыл бұрын
gubad
@kausthub04542 жыл бұрын
@@LearningLad sir, I have installed the vs code and all what u have mentioned but aftr typing the code, when i run it nothing is being shown as output or error...please help sir
@victorstone37203 жыл бұрын
Thank you so much for your help. I really liked the way you explained each step! Now I can execute C program on VS code, looking forward to some more amazing content.
@LearningLad3 жыл бұрын
Glad this video helped you. Will make more content :)
@mehjamilabonny41602 жыл бұрын
relief! watched so many videos to start up C programming. this video helped so simple and precise explanation
@LearningLad2 жыл бұрын
Glad it helped!
@HamzaAli-we3lg Жыл бұрын
Sir, Thanks a lot. I had been unable to run my C++ programs on VS code, I called it quit, saw your video and am back on VS code. Thanks.
@LearningLad Жыл бұрын
Glad it helped
@reymilocuevas34853 жыл бұрын
Hey man. Thanks alot for this video. Very much appreciated, now that I lost my job to covid I can finally catch up and learn c++ and its all thanks to your help
@LearningLad3 жыл бұрын
Glad it helped!
@Shaurya.R3 жыл бұрын
Thnks finally I can do c++!!
@LearningLad3 жыл бұрын
Awesome Keep learning :)
@user-nm4vn9tq5o3 жыл бұрын
Thanks a lot sir....I was very much frustrated since yesterday because vs code just wasn't getting set up. I even watched code with Harry,Apna college tutorials for vs code set up. Now I watched all your 3 tutorials and it worked for me. Thanks a lot sir.From now onwards I will regularly check out this channel..
@LearningLad3 жыл бұрын
Thank you Keep learning
@brendurant11 ай бұрын
Best tutorial out there, was trying to figure this out elsewhere for too long.
@LearningLad11 ай бұрын
Thank you :)
@sudhirpadhye70934 жыл бұрын
Excellent videos. I followed every step that you have explained for C CPP and Python and its working. I had tried this many times but never worked. Thank you very much!
@LearningLad4 жыл бұрын
my pleasure :)
@puregold39352 жыл бұрын
You have been a great help. Very clear instructions and easy to follow. Thank you so much ! I can finally start practicing C 😁
@erhanertem196 Жыл бұрын
C++ installation and now this...made my day..thanx..That read only output tab drove me crazy...
@LearningLad Жыл бұрын
Glad it helped
@Martinko_Pcik3 жыл бұрын
Excellent help for beginners. As a suggestion you could also show where you can find the executable produced and how you can run it from anywhere. Even on a computer with nothing installed. Some people have hard time seeing the difference between interpreters like Java or python which both need some runtime environment to run the program in, vs the direct machine code running directly on OS.
@azhagurajaallinall1262 жыл бұрын
Could you eelaborate this further,like how to run any code in any machine? Thanks in advance 😃 09.08.2022 7:17 pm ist
@Dima-rj7bv3 жыл бұрын
This is exactly what I was looking for! Thank you for the exhaustive explanation!
@LearningLad3 жыл бұрын
Glad it was helpful!
@arnoygayen19842 жыл бұрын
A huge thanks to you. You just saved me from breaking my computer. subscribed
@LearningLad2 жыл бұрын
Welcome!
@afnankhan9865 Жыл бұрын
bhai mai kuch nhi samajh pa rha tha aapne itna ache se explain krke setup krwaya hai kia b bhulna mushkil hai hats off dude amazing 🙂
@Introvert_Explorer7913 жыл бұрын
awesome neat clear explanation I have an error before its ok new subscriber bro
@LearningLad3 жыл бұрын
Thanks and welcome
@amarpratapsingh94153 жыл бұрын
This is called perfection..
@LearningLad3 жыл бұрын
thank you :)
@aminedev_2 жыл бұрын
everyone gangsta until dekstop comes in. beside the jokes man, this is really helpful thank you very much!
@LearningLad2 жыл бұрын
did I say dekstop? I didn't realize that :)
@aminedev_2 жыл бұрын
@@LearningLad yeah xd. i am not saying as mocking of u or anything, beside that, thx alot for this helpful tut dude! Big respect
@drazenklikovac29642 жыл бұрын
bro do u know why does it say File format not recognized collect2.exe: error: ld returned 1 exit status
@Debjit_Adhikari Жыл бұрын
Thank you so much sir 🙏. I have seen a lot of videos but no one ever explained the specific topic that I was looking for.
@LearningLad Жыл бұрын
Most welcome :)
@luccagazottovettori56003 жыл бұрын
man, you really saved my life. I'd been trying to run my code for hours before I saw this video. Thanks :)
@prog-255 Жыл бұрын
'gcc' is not recognized as an internal or external command, operable program or batch file.
@marrrinus8 ай бұрын
Same problem. Did you solve it?
@prog-2558 ай бұрын
@@marrrinus no
@marrrinus8 ай бұрын
@@prog-255 I solved it. 1. Installed WSL on Windows 10, installed gcc in Ubuntu Terminal. 2. I changed the Remote Window in VS Code to WSL
@keith18793 Жыл бұрын
I just wanted to say thank you. It is very frustrating when you are trying to learn something new and no matter what you do it does not work. Especially when it is not because you messed up what you are trying to learn but because of a setting in the program or on the computer. Thanks to you I know I was doing it correctly the whole time and it was just a setting in VS Code. Thanks again.
@LearningLad Жыл бұрын
You are so welcome!
@aadixya2 жыл бұрын
THANKS ALOT I WASLITERALLY STRUCK FOR A WEEK NOW!
@LearningLad2 жыл бұрын
Pleasure
@chillsuicide36982 жыл бұрын
Omg you are a life saver, i wish you only the best in life
@LearningLad2 жыл бұрын
Thank you
@nishanth84383 жыл бұрын
My god Awesome bro 🔥🔥🔥🔥 Today my day was fully wasted in this but now 🎉🎉🎉🎉
@LearningLad3 жыл бұрын
Glad to hear that
@lizardlizard4904 Жыл бұрын
unironically better than university tutorials
@LearningLad Жыл бұрын
thanks
@lizardlizard4904 Жыл бұрын
@@LearningLad
@erickgaticacandia967 Жыл бұрын
FInally a video that worked for me, I'm starting with C++ and now I can run code, thank you !
@LearningLad11 ай бұрын
You're welcome!
@shivakumar-lv6wr2 жыл бұрын
Your video was simple and easy to follow. I am saving this in a playlist for later!
@LearningLad2 жыл бұрын
Thank you Keep learning
@lilmonkianime80843 жыл бұрын
DAAAMN, THANK YOUU BERY MUCH!
@LearningLad3 жыл бұрын
my pleasure :)
@dankad59892 жыл бұрын
bro thankuu because of you i was able to run c++ in vs code after trying for more than 2 days
@LearningLad2 жыл бұрын
Most welcome
@hypead5507 Жыл бұрын
Helped me a alot i have been trying to run a C program on vsc but there was some issue with mingw now after following your steps everything is working fine thanks alot.
@LearningLad Жыл бұрын
You're welcome!
@lanatrzczka3 жыл бұрын
Thanks to you I got it! Absolutely fantastic tutorials! Hope you do some stuff in C so we can all learn from you.
@LearningLad3 жыл бұрын
Thanks, will do!
@saumyakraj14623 жыл бұрын
I spent 1Hr in VSC's C++ installation guide and still was unable to make it work! Your video is a gem dude!!
@LearningLad3 жыл бұрын
Glad it helped!
@gauranshchopra11002 жыл бұрын
I had to start coding in c and c++ and this video of yours helped me a lot. thank you so much
@LearningLad2 жыл бұрын
Pleasure
@adityajadhav9876 Жыл бұрын
It's amazing...... it is the only video on KZfaq which solves all the problems for the beginner
@arjunseal24173 жыл бұрын
"'gcc' is not recognized as an internal or external command," this is the output i got even though i installed mingw. what should i do?
@vvekmathew3 жыл бұрын
Add path. Then restart your computer and try again
@rasu843 жыл бұрын
@@vvekmathew How do I know the path where gcc is installed
@rasu843 жыл бұрын
@@renjithroy8422 Yeah thanks. I figured it out. This video assumes that people have already installed MinGW. Should have been clarified.
@renjithroy84223 жыл бұрын
@@rasu84 Great. He had made another video where he explains on how to install MinGW, that's how I figured it out.
@shouryamkumar61583 жыл бұрын
@@vvekmathew sir, I did add path to to environment variable but still getting same result. Also the files in my mingw folder are not showing .exe extension. PS. I have 32 bit windows.
@tanupriyatommy4 жыл бұрын
It's amazing sir, nice explanation. And it's helped me alot. Thank you so much.
@LearningLad4 жыл бұрын
my pleasure :)
@sriram58393 жыл бұрын
Hello sir The output isn't coming. Every time I need to press ctrl+s. Please tell me anything to avoid this thanks
@isaacgaribay965 Жыл бұрын
Dude all of your tutorials are stress free!
@LearningLad Жыл бұрын
thanks
@mina.imnida7 ай бұрын
the last part was all i needed the other tutorials didnt take note of the last part thank you so much
@LearningLad7 ай бұрын
Most welcome
@jamesrgamesoffical3 жыл бұрын
Before I wanted to try c++ in visual studio code but I was using their tutorial and I was really confused but you made it easily understandable
@LearningLad3 жыл бұрын
glad it helped :)
@drazenklikovac29642 жыл бұрын
@@LearningLad hey bro why does it say in my terminal that File format not recognized collect2.exe: error: ld returned 1 exit status? Im confused
@Brain_With_Limbs4 жыл бұрын
If it's still not running for you giving you an "Access Denied" error message. Check and see if you have an antivirus program such as McAfee or Norton, and try turning it off, close Visual Studio Code and open it again and try to run the program.
@swatisaxena55463 жыл бұрын
Thanks a ton
@asma_1033 ай бұрын
Thank you so much I've been having Sooo much trouble and now it is finally working, god bless you
@LearningLad3 ай бұрын
glad my video helped you keep learning :)
@mohammedsaif32 жыл бұрын
you forget to say save after writing the program as i am a beginner and after writing the program i don't know what to do so i searched for the videos then i found that after writing the program we have to save the program to run the program . BTW thank you for making this video . It really helped me a lot . 🥰🥰
@LearningLad2 жыл бұрын
yes i forgot that thank you :)
@gamingstrom60043 жыл бұрын
While running the code it is saying gcc is not recognized as an internal or external command, Plz help
@anirudhsharma31683 жыл бұрын
yes I am having the same issue !
@Memer20223 жыл бұрын
@@anirudhsharma3168 link MinGW
@antonel_rch3 жыл бұрын
@@Memer2022 how?
@Memer20223 жыл бұрын
@@antonel_rch watch his video where he installs MinGW. Follow the procedure and then restart VS Code application.
@hahayes72053 жыл бұрын
Try adding the g++ and gcc path to your environment variables
@succor52663 жыл бұрын
Brother it shows ""gcc" is not recognized as an internal or external command"
@RoarStaze11 ай бұрын
Restart vscode because if you added it to your environmental variable while vscode was running then vscode will output that it doesn’t recognize. Just a simple vscode restart but I’m sure you figured that out by now
@Geekawii5 ай бұрын
Last tip is the chef kiss for me that is the problem i was facing exactly! perfect
@LearningLad5 ай бұрын
Glad it helped!
@skyward7903 Жыл бұрын
This was so confusing until this video. Thanks a lot!
@LearningLad Жыл бұрын
You're welcome!
@chandrashekarr19773 жыл бұрын
Fantastic. Simple and easy to follow Language & to the point (no nonsense talkings to kill time) content. Thanks.
@LearningLad3 жыл бұрын
Pleasure
@mohammadforhad60063 жыл бұрын
Thank you so much bhai 😍😍🥰 love you a lot 😊
@LearningLad3 жыл бұрын
Always welcome
@God_Gaming6942010 ай бұрын
Thankkkk youuu it's been 3 days I was going crazy thanks to you
@LearningLad10 ай бұрын
Glad I could help
@sisodiarajput19342 жыл бұрын
You people are real Content provider 👍
@LearningLad2 жыл бұрын
thank you :)
@Flavzz4 жыл бұрын
For anyone having issues after enabling "Run in terminal" even if you click on "Stop code" CTRL+ALT+M -> and you keep getting the error message "Code is already running". Close you Visual Studio Code and run it again; should work.
@LearningLad4 жыл бұрын
Thank you for Posting :)
@ShahidKhan-uf8hd4 жыл бұрын
I got an error saying "The system cannot execute the specified program.". What's do I do?
@arunjaisankar4112 жыл бұрын
Started my life in learning c and c++ with your heartful of hands❤🙂
@LearningLad2 жыл бұрын
all the best :)
@arunjaisankar4112 жыл бұрын
@@LearningLadThank you ✌🏻️❤
@prakashnarayan4770 Жыл бұрын
been struggling with this issue for a week , resolved quickly , thank you!
@LearningLad Жыл бұрын
most welcome :)
@sparshbaliyan50114 жыл бұрын
I am getting the error that says no such file or directory. How do I install stdio.h, please tell.
@connorlausch80544 жыл бұрын
I had the same error, but it was because I had spelled it studio.h not stdio.h
@shalini69303 жыл бұрын
While creating file name don't leave space. After typing without space, it run the output for me.
@MrWitherSkulls3 жыл бұрын
ctrl + s
@michelfotzo12763 жыл бұрын
try using return 1; instead of return0;
@manassehabraham55893 жыл бұрын
@@shalini6930 Thank you
@AceGriffin88394 жыл бұрын
You are a freaking legend brother. Thanks a lot for this video.💙
@LearningLad4 жыл бұрын
My pleasure 😊
@surajlahre8798 Жыл бұрын
I don't know how to thank you sir ☺️ I am trying to install gcc from 3 days but now after following your steps i successfully completed the install🤠🤠
@LearningLad Жыл бұрын
All the best
@AGREEaddh Жыл бұрын
Don't know how to thank you for this video i was struggling to use VS code ❤.. Thank you and keep educating more people
@LearningLad11 ай бұрын
You're welcome 😊
@johnkery64493 жыл бұрын
I have got error in output..it says < -gcc -no directory found > Even I add in Computer path In command prompt it says fatal error so it includes in computer but what problems during running code I don't understand plz help