Here's for everyone that keeps messaging me and asking me how to setup and use a MIDI controller in Serato ScratchLIVE, in particular the Behringer DDM4000 mixer.
Пікірлер: 100
@tyvngo15 жыл бұрын
I always wondered how to do this and finally I know how. I can't wait to map out my DJM-800. Your videos are very intuitive. We really appreciate you taking your time to explain and show us new things!
@tomrush0813 жыл бұрын
awesome thanks! ive had the DDM for like 4 years and serato but never even thought of using them together!!
@djblackc33712 жыл бұрын
You still need the serato box. The DDM is just a midi controller that lets you use the buttons on the mixer to control functions on the software.
@sinetwo14 жыл бұрын
Wow, didn't know you could use analogue stuff like a knob for midi input... Selecting music like that is amazing..
@technojoe15 жыл бұрын
what if you want to connect 2 turntables to the ddm4000? would serato recognize them through that midi connection if you threw the timecode vinyls on top?
@biggocho12 жыл бұрын
@DJLazBoz Hey I just bought the DDM4000 and had the same problem. No idea why does that either, but I kept turning it on and off till I barely was able to see anything on the FX screen, but then also you need to turn the nob that is on the right side of the effect area to move the contrast of the screen up till you are able to see whats on the screen.. good luck
@MrDjiceq13 жыл бұрын
@jeanviarel Hi I recently bought the DDM 4000 slightly used i had the same issue. "VR24" particularly means the system is going for a system self check. I had switched on and off several time but did not pass that point until such time i had let the unit to do a full system re-test.. Just On the DDM4000 and Press only Once the OK knob (Console Set up knob) and let it go on by itself, after a while the system will start to test all its lights,buttons,knobs etc.... let it complete then restart..
@willievaughn6474 Жыл бұрын
You're amazing Thank you
@djjohnnykey11 жыл бұрын
2 updates if you are running this setup, Check the M-Audio website for serial number, some of them are defective and M-Audio will honor the warranty. Second s that there is an update to the M - Audio Driver as well. I had an issue with random tracks being loaded as I scrolled crates with the cross fader. other than that I am happy with this setup.
@icdedsquids15 жыл бұрын
nice! thanx 4 the quick response.
@BeeJizzo15 жыл бұрын
i have the pioneer djm-700 with serato and i cant seem to assign any midi controls to it.. i also have it connected with a m-audio uno.. i am running it with a toshiba satellite..
@djayamek14 жыл бұрын
@partyspecialists I recommend the Akai LPD-8. works great for me.
15 жыл бұрын
this was totally not what i was looking for... but i enjoyed the vid. ghehehe
@JussAren14 жыл бұрын
so im gonna be buying this mixer and i have a serato and macbookpro and i have a external harddrive... so afer the midi to usb plugs in to my mac. and serato usb to my mac.... and how can i plug my exeternal harddrive cause macs only has 2usb
@S0CLOSE715 жыл бұрын
yes, today i download the 1.8.3 version of SSL and i got the green light after i assign the button, do i need to save something after that to make it work?....after i have it assing doesn't work, its weird works with the 1.8.3 version but not with the 1.8.2
@alchemearob15 жыл бұрын
Thank you Jon
@Fediwillkillyou13 жыл бұрын
I have the same midi to USB adapter my comp is saying it is working fine but I'm not able to map anything nothing happens when I try to assign it. Is there something on the ddm that I need to set up so that it will let me do so? Or am I having a problem with the mixer? Thanks any help appreciated
@djdremusic113 жыл бұрын
Is it possible to midi map the buttons in FX1 and FX2 section in the center of the mixer to control scratch live. I want to be able to midi map this section of the mixer because of the layout.
@DjDere15 жыл бұрын
mine it is not function well means i assigned it and then it doesn't work may be i'm missing step the way u show its easy but not with me do u have to set up on the mixer or somewhere please i need more info
@rjfermin14 жыл бұрын
@lucagasgas do i need a soundcard, even if i have 2 dns 3700....and de dmm4000...and i want to use as a midi controller...for ableton o virtual dj.......thank you
@ajpepe7215 жыл бұрын
Can this be set via midi to completely control serato or virtualDJ. What i mean is can you program it so that the only hardware you would need is your laptop with software and this mixer, so you could choose track, cue it and then play it via a button on DDM and then use other buttons on DDM to pitch bend and also increase/decrease pitch, so in essence doing away with mp3 compatible cd decks ? Also once midi is assigned to do this how easy is it to revert back to normal to use with vinyl decks
@S0CLOSE715 жыл бұрын
whats the whole process to set up midi on ssl?...you show us the connections, but what else we need to do?
@greg2015201512 жыл бұрын
exactly how long did you leave it alone? Mine gets stuck at the "check buttons/knobs screen" Thx for any help. Driving me insane!
@zash19911113 жыл бұрын
is the master out through your computer or mixer? do you have to get an external sound card to get the audio to transmit through the mixer?
@choppstr14 жыл бұрын
Hey S.T I have the same problem as Cahs09..I hook it up and nothing happen. It seems pretty cut & dry, hook up midi out and usb? Nothing? Any suggestion would be welcome?
@ed3305814 жыл бұрын
I bought key board midi control but dose not work,could you tell me why
@sainifabulous15 жыл бұрын
how would you use the buttons you replaced on ur mixer? or are those buttons made for midi?
@hardrainentertainment60156 жыл бұрын
Hey I have a ? My controller was working fine yesterday when I set it up. But today I turned it on serato scratch shows it's recognised but the controller is not working. I checked my USB to see if the pc is picking it up and it does it when works on vdj but serato it's not working
@greg2015201512 жыл бұрын
Did you fix your mixer by leaving it alone and finish the self test?
@djspook13712 жыл бұрын
do you still need a serato box if you have the M-audio uno ????
@djsaminda13 жыл бұрын
Will i abble to do the Midi mapping with the Pioneer DJM-700 like on the Video. Thx
@rey7131997712 жыл бұрын
i have 2 ndx 800 and scartch live, hpw can i map both of them?
@datphatax14 жыл бұрын
i have this setup, thanx for the info, it works great, but i want to control a drum machine with the midi clock from the ddm4000 as well, how can i do this? seeing as the midi out is already in use. can i use the midi in for serato?
@jamez90216 жыл бұрын
I had trouble setting this up.... its actually midi in on cable to midi out on mixer i bought a 8 dollar cable midi to usb on ebay for a keyboard and it works just fine
@DJJeevanMusic_12 жыл бұрын
would this be possible to use with a numark v7 ? PLEASE REPLY ASAP AS ITS URGENT THANKS
@DjTecniq14 жыл бұрын
I just got a brand new midi uno usb controller and can not get it to map anything in vsl using my djm 700. i need help
@alchemearob15 жыл бұрын
Can this be done using the Pioneer Djm 700
@MySoundboy12 жыл бұрын
so if i hve a pc do i hve to install the serato sofware cd first on the pc before i connect the ddm 4000 ...???. or can it work without the installation serato disc
@sun9woo15 жыл бұрын
can you set the quick keys on your mac keyboard as well? i started using serato and i would like to have the quickkeys set on the keyboard so whenever i play in the club with different equipments it would be nice to have it set up on the computer rather than setting up on every equipments i have to play on.
@selectajay200015 жыл бұрын
nice vid! i wonder if its possible to midi up other dj hardware like..sp samplers & so on?..peace
@SnakesMF15 жыл бұрын
I found the Pioneer DJM-800 was terrible for midi controls, based on my experienced djing out and about with serato. I couldn't believe how much better this was when i used it considering its about 1/4 the price. pity about where the headphone jack is located....
@SteppingBatman11 жыл бұрын
Is It Possible To Connect The DDM Without Any Serato Interfaces
@greg2015201512 жыл бұрын
Did you ever figure this out? Mine is doing the same thing?
@S0CLOSE715 жыл бұрын
hey my friend,thanks for such a good video, i just bought the ddm400,the midisport uno, and already have serato, following those steps in that video and i just can't set the midi. after install the drivers from the cd, after i get to midi learn from serato, i click to assign controls but nothing happends doesn't change green after i press a button or knob on the mixer,....any help?
@djslimnasty13 жыл бұрын
yo this is Dj Slim Nasty from Myrtle Beach SC, I need to know where did you get the drivers to connect my DD4000 to my Serato
@maluppa1814 жыл бұрын
Hello, I wanted to ask if the mixer can 'be used in vinyl timecode mode without sound card and if this system works with traktor. Thanks and regards.
@greg2015201512 жыл бұрын
Did you ever solve this problem? Mine is doing the same thing. Thanks for any help!
@mrwtfpos15 жыл бұрын
hey i need help settng DDM4000 on virtual dj. can you make a video to help me out? also do need the mapper?
@DJMajestic123412 жыл бұрын
Can you show how to map the midi to the crossfader to control the video & audio thru Serato video? Thank you in advance.
@AIRBORNFILMZ12 жыл бұрын
i have everything connected but its not letting me map anything, what should i do?
@starboysounds12 жыл бұрын
Hey can you use Gemini Cntrl-7 with serato Scratch LIVE???????????????
@DJLOUIEMIX15 жыл бұрын
great info !!!!
@khrispants0115 жыл бұрын
good walkthrough!
@caddycuts14 жыл бұрын
is the fader nice on the ddm 4000 with serato?
@deejayfero8111 жыл бұрын
Are you using a sl1 box? or your using M-Audio UNO cable?
@stevegriggs40229 жыл бұрын
I also have a ddm 4000 with a mio usb. I am using a pc and can't find or don't know how to find the drivers to make it work with scratch live. I'm pretty certain it's connected properly but I can't get it to assign midi in scratch live. Can anyone please help with this issue? Thanks
@allanxpoe8314 жыл бұрын
any videos with the dicer?
@SOULDEFIANT15 жыл бұрын
can you go from midi to firewire?
@mrworm111 жыл бұрын
Ok so the MIDI UNO plugs into the laptop... then where does the SSL 2 plug into and how are the cables run? I looked at the Serato website and just became confused looking at the diagram. Can you make a brief description outlining how everything is hooked up? Thanks! =)
@djchuckc13 жыл бұрын
Very helpful thanks.
@DjSkki14 жыл бұрын
mine does not work what kould i be doing wrong
@djkoopz15 жыл бұрын
Thanks so much for the info!
@Furbii32714 жыл бұрын
how would you map this for traktor scratch pro?!?!
@Maxsdiscos14 жыл бұрын
quite interesting
@FunkyRob15 жыл бұрын
So what 10" dj mixers are out there with MIDI capabilities like this? The TTM57 is way out of my budget
@billy7317811 жыл бұрын
when you say i have to download the drivers, drivers on the midi wires or what?? cause i have a wire that is midi to usb i got from ebay, but it does not do anything when i press the buttons to assign them on scratch live. do you have any idea what im doing wrong? I havent downloaded anything with this mixer and i am on a PC not mac.
@bomotsot12 жыл бұрын
Hello,just a quick one...Would it be possible to use two midi controllers in Serato. I'm using Denon DNHC-S 1000 and now that I'm gonna be mixing video next month,I'm planning to midi map my DJM 800 crossfader to cross fade videos in Serato video.I hope u can reply to my querry. Thanks very much and regards:)
@alfonso70413 жыл бұрын
Is the Fader mappable for example can i crossfade videos with it?
@krakthemak710 жыл бұрын
ok, i am having trouble trying to find the driver for this mixer, i am using a windows pc on a windows 7 32bit...do i still need that driver??
@coolmjr15 жыл бұрын
How do you go back to defaults?
@DjAllanXp11 жыл бұрын
Hello! hey! so how do you change it back to regular mixer?
@SOULDEFIANT15 жыл бұрын
is the whole mixer can be midi map?
@icdedsquids15 жыл бұрын
would this work w/ ableton live?
@isaaccastro4639 жыл бұрын
WHICH BOX DO YOU HAVE . I HAVE A SL3 BOX WILL IT WORK HELP PLZZZ
@dadokadu11 жыл бұрын
is possible use serato with ddm4000 without interface audio? tks
@djreadyred14 жыл бұрын
Thanks for the info!!
@CalvinGoodwin11 жыл бұрын
when you asigh it do it stay there,or you have to keep doing it
@darkcomet11212 жыл бұрын
When I have Serato open, it only shows one deck on the screen. How do I get two decks?
@hise151114 жыл бұрын
hey dude, what ur recommend to use midi interface...
@AShahentertainment12 жыл бұрын
IT does not work for some reason!!! do you know why? I have the correct cable, mac and it won't work....
@djjaime91610 жыл бұрын
you cant control the volume when you turn on the midi on the channels
@superdjrumbero8 жыл бұрын
can I used this midi with SERATO DJ ?or just serato scratch live
@johnlove145910 жыл бұрын
can it be set on da behriger nox 606????
@clintonshuker911911 жыл бұрын
hay bro where can I get the software to run this or do I need scratch live can I download this from somewhere? thanks clint
@greg2015201512 жыл бұрын
did you get another ddm4000?
@onthemoveent407010 жыл бұрын
hey I have the same mixer an got the mio iconnectivity 1 in 1out usb to midi I can't get it to do anything won't go green at all any more info????
@djquickotm14689 жыл бұрын
I got it work it's running great
@foulmouthc114 жыл бұрын
you sound a bit like kevin bacon - r u from the same area?
@CalvinGoodwin11 жыл бұрын
mine is brand new and it don't work...
@DjDere15 жыл бұрын
hey man still not working if u have video when u set the mixer pls post so i'll see it thanks
@kcutz15 жыл бұрын
hhhmmmm i need that Lemur/jazz mutant interface.
@carlmcenery191611 жыл бұрын
can you use serato Dj intro ?
@ChadThomason13 жыл бұрын
@djpooch23 i am having the same problem
@aleksanderkulik29125 жыл бұрын
Heh where is microphone volume control???
@Sikwidityo14 жыл бұрын
@JussAren Invest in a usb hub.
@greg2015201512 жыл бұрын
for over $1500.00, it sure as hell better be!
@mrworm111 жыл бұрын
ST I sent a video response on the issues I'm having. If you get a second can you check it out for me? Sorry about the poor video quality. Just something I had to make really quick.