Today I want to show you how to setup your compressor for paint to get consistent air flow and never worry about your air pressure dropping while painting your project.
Пікірлер: 582
@LIVEEVENTINNOVATIONS8 ай бұрын
Nobody else is including this critical step in spraying a car. Thanks for this!
@UndergroundPaintKing8 ай бұрын
You’re welcome and I’m glad the video was helpful!
@thefisch13322 жыл бұрын
The people's champ does it again! Thanks for all the great videos. Unlike all the other channels that say "best small compressor at home spray guns", then run them off pro 60 gallon tanks you actually show how to run on a small tank. Top notch
@UndergroundPaintKing2 жыл бұрын
I do my best to help my people out Fisch…I appreciate you checking out the video!
@2koolforyou882 жыл бұрын
Very tru I paint with a hf 29 gallon compressor haven't sprayed a entire car yet but it can handle what I use it for even with some expensive guns I have
@mohammedsabeel505 ай бұрын
@UndergroundPaintKing hi my bro, would i be able to use a lvlp gun on a hyundai 50litre oil free compressor, 11cfm 2.5hp
@torydz23 күн бұрын
I've restored three cars already with a 6 gallon pancake compressor. I spray the traditional acrylic lacquer for restoration purposes. I do one panel at a time. The entire paint job on any given car takes about seven days, as I spray it in sections. I know, the words "acrylic lacquer" is practically a swear word to today's painters, and painters who still use it are practically considered alien life forms. With acrylic lacquer, you can literally stop in the middle of a panel and continue painting the next day if you want. You have to cut-and-buff after you're finished, but I consider that "my therapy" :)
@brianhankerson916915 күн бұрын
Bro!!!! I didn't even consider the effect of this 100' hose. You sir are my hero today.
@UndergroundPaintKing15 күн бұрын
@@brianhankerson9169 glad the video was helpful Brian💯
@epasternak4206Ай бұрын
My wife just bought me a 26 gallon, and I bought a LPLV gun. I have new filters also, I sincerely appreciate these vids man.
@UndergroundPaintKingАй бұрын
Awesome ❗️ and I appreciate you watching the videos and I hope they continue to be helpful 💯
@hurricanesandgators2 жыл бұрын
First time painter, been watching your videos and purchasing products per your suggestions. Now its time to get to work... Excellent content for a novice to learn...keep em coming...thanks for the info
@UndergroundPaintKing2 жыл бұрын
You’re welcome Fam and I hope the channel continues to help!
@williamharris6313 ай бұрын
I have the same compressor do I set it up the same way I have a A 610 spray gun love all your videos
@ginfizz20 Жыл бұрын
Thank you. This was what people don't understabd when they start painting.. What goes along with that is "while painting, don't let up on the trigger as you turn back for the next stroke." In your video when you let up on the trigger and the pressure goes up to like 60, the split second you pull the trigger, you will for a split second, get 60 psi at the nozzle instead of the 30 . You can hear this in your video. Each time you pull the triggeer, you can hear a RUSH of air. To correct this, when painting never let all the way off the trigger. Just relax the trigger at the end of a run, but keep the AIR flowing through the gun with out siphoning any paint.
@UndergroundPaintKing Жыл бұрын
Thanks Tom I appreciate you checking out the video and leaving a great tip💯💪🏾
@micko1404 Жыл бұрын
you explain things simply brilliantly!!! Of course the longer your air hose, you'll need slightly more air pressure coming out of the compressor. Also it prevents the compressor running all the time and some water separators have pressure limits. Also ensuring you have no air leaks between the compressor and the gun helps. Top job good sir!! Hello from Newcastle, Australia!!
@UndergroundPaintKing Жыл бұрын
Thanks Mick for checking out the video and leaving some great info, I appreciate you watching all the way in Australia 🙏🏽
@danwingo75123 ай бұрын
Finally someone who could answer the question for me. Thank you so much!!!!!!!!!!!
@UndergroundPaintKing3 ай бұрын
You’re welcome, I’m glad the video helped!
@Grant72 жыл бұрын
And this is why you are THE PEOPLES CHAMP!!!! …. All new painters should definitely sub to this channel
@UndergroundPaintKing2 жыл бұрын
I appreciate you Grant and I’m doing my best to help out the new painters in the game…thanks again bro!
@Bushman44 Жыл бұрын
UPK, I appreciate the jewels you feeding the people. I am working with the same compressor and I was clueless about the set up; until I saw this video. Thank you! #1965Chevelle
@UndergroundPaintKing Жыл бұрын
You’re welcome and I’m glad I could help Craig!
@duderudy2 жыл бұрын
Great info, UPK! I'm getting ready to paint my truck once the weather warms up and this video is a huge help. Thanks man!
@UndergroundPaintKing2 жыл бұрын
You’re welcome duderudy I hope the channel continues to help as you do your own project!
@frankrodriguez19772 жыл бұрын
Great info UPK. This will definitely help me with losing pressure, I have a small Craftsman 30 gal 5 hp that works well but these tips will up my game. The Peoples Champ at it again with awesome tips. Thanks UPK
@UndergroundPaintKing2 жыл бұрын
You’re welcome Frank I appreciate you and I’m glad the info is useful to you!
@piermont22002 жыл бұрын
Appreciate the info bro! I have a similar setup, with your thorough description of using a small compressor we can know get consistent air pressure and turn out some quality work.
@UndergroundPaintKing2 жыл бұрын
Yes sir William im glad the info helps!
@ervinlay6917 Жыл бұрын
Thankyou!! I love the way you explain everything in detail 🙏💯
@UndergroundPaintKing Жыл бұрын
You’re welcome Ervin💯 I’m glad the video was helpful!
@E_Rod742 жыл бұрын
Out of all the channels I’ve checked out, you most definitely give the best advice. Keep them vids coming.
@UndergroundPaintKing2 жыл бұрын
Thanks Enrique I appreciate that and appreciate you checking out the channel and I hope it continues to help!
@blue28242 жыл бұрын
Most excellent lesson! That is something beginners like myself might never have considered. Thank you for the great and informative video.
@UndergroundPaintKing2 жыл бұрын
You’re welcome Blue2824 I’m glad the information is helpful to you and I appreciate you checking the video out!
@Mechaniclyfe2 жыл бұрын
This is pretty much exactly how I have mines setup , for consistent air flow. Dropping pressure is a big problem with smaller compressors with those bigger guns I use and this setup like this has helped dramatically. Good video brother
@UndergroundPaintKing2 жыл бұрын
Thanks Bro I appreciate that and keep dropping that content!
@robertcharlton155110 ай бұрын
You are a great teacher. Thank you much. ❤
@UndergroundPaintKing10 ай бұрын
Thanks Robert, I appreciate that 🙏🏽💯
@jimrogers41188 ай бұрын
Comment Dropped 👑 from Grand Rapids Michigan. Thank you for all you do for us DIY garage painters. After watching videos for 2 years, I finally pulled the trigger (no pun intended) and painted two cars this year. Learned a lot. They both look awesome from 5 ft away. Success! Thanks again man. Best wishes to you.
@UndergroundPaintKing8 ай бұрын
Awesome to hear you pulled the trigger and did 2 projects 🙌🏾 I’m glad I could help in anyway possible and hope the channel continues to help out 💯💪🏾
@novacain822 жыл бұрын
Sending thanks for being a real one and giving me a real video understanding basics
@UndergroundPaintKing2 жыл бұрын
You’re welcome Novacain82 I hope the info helps you!
@vocals43782 жыл бұрын
Man I'm very impressed by the skills of you teaching how to set up a compressor and paint gun I paint car's as well I just bought a new compressor 21 gallon and was about to be setting it up and your video came up and now it's set up for painting my car's thanks your truly the UPK
@UndergroundPaintKing2 жыл бұрын
You’re welcome bro I’m glad the video was helpful and I appreciate you checking it out!
@husky12392 жыл бұрын
Upking nice talk about air pressure well explained and simply explain especially when you spoke about loosing air if you got a long hose thank you upking
@UndergroundPaintKing2 жыл бұрын
You’re welcome Husky I’m glad the video was helpful!
@kenchihimura2 жыл бұрын
Thanks Bro! Wicked knowledge ! The details and demo! Bless!
@UndergroundPaintKing2 жыл бұрын
You’re welcome Kenchihimura I hope the video helps!
@augieschultz2530 Жыл бұрын
Thank you. You are better than most at giving instructions.
@UndergroundPaintKing Жыл бұрын
Thanks Augie I appreciate that, I do my best to make things easy for everyone!
@LeninVargasAvila6 ай бұрын
Hello UPK, you are the best! You've solved a question that I've been searching for months in KZfaq videos. Sending a big hug from Ecuador 🇪🇨
@UndergroundPaintKing6 ай бұрын
I’m glad I could help with the video and I appreciate you checking it out 🙏🏽
@DaVid-yp3js Жыл бұрын
Thank you, sir. I am not painting car but this info will help me setup the spray gun for staining/painting a deck and shed. A universal setup.
@UndergroundPaintKing Жыл бұрын
You’re welcome David, I’m glad the video was helpful and I appreciate you checking it out!
@bigblockT758 ай бұрын
Came across your channel a while back, great simple explanations. Appreciate the content! Picked up the A610 after your review! Cheers
@UndergroundPaintKing8 ай бұрын
I’m glad you came across the channel and it was helpful to you🙏🏽💯
@mufffintop5355 Жыл бұрын
I always wanted to paint a car I just bought a 20gal compressor now I gotta get everything else your videos are very helpful just got yourself a new subscriber.
@UndergroundPaintKing Жыл бұрын
Thank you Muffintop, I appreciate you subscribing to the channel and I hope it continues to be helpful!
@stax60572 жыл бұрын
good video. I work full time in a shop so I'm used to having plenty of air flow. I wish I woulda had this video when I first started messin around with painting at home. I got the 20 gal kobalt from lowes
@UndergroundPaintKing2 жыл бұрын
Good to hear you’re in a shop and this info is definitely good for people just starting out like how you and me did…I appreciate you checking out the video Stax!
@jdnstylescarlifenelson19692 жыл бұрын
I have that same one and it does the job... Had it for 5 years now and has made me alot of money... Just have to go a bit slower so the air stays build up ... And yes drain the tank .. I hooked up 2 outside dryers for mine and love it
@UndergroundPaintKing2 жыл бұрын
It’s always good to hear a success story…I appreciate you checking out the video!
@billconant53612 жыл бұрын
Thank you, I appreciate your video and your clear explanations
@UndergroundPaintKing2 жыл бұрын
You’re welcome Bill I appreciate you checking out the video and I hope it helped!
@renegonzales2186 Жыл бұрын
Thanks for the info bro. Great video keeper coming. After learning and watching you I feel like I can spray everything.
@UndergroundPaintKing Жыл бұрын
You’re welcome and you can spray it all💯💪🏾
@jeffnations66492 ай бұрын
Thanks for your explanation on the hose. I never thought of it.
@UndergroundPaintKing2 ай бұрын
You’re welcome and I’m glad the video was helpful 💯
@foxtrot685 ай бұрын
I gotta be honest dude ..I'm about to attempt a paint job on a project car of mine and everyone thinks I'm crazy having never painted before ..BUT ..I've searched and watched damn near every video out there including yours ...YOU have inspired me to feel like I CAN do this ..I've learned more from your videos then most others and I thank you ! I'm attempting a little bit of a tough one a base coat with different color stripes over the car ..but I've got a good lvlp gun ..I've practiced and dialed it in ..A simple garage setup with 20 gallon tank ..I'm confident I can do this ..Thank you again for all your info ..I'm just waiting on warmer weather .
@UndergroundPaintKing5 ай бұрын
That’s what I like to hear 💯 you’re gonna kill it and I’m glad I could help in anyway possible 💪🏾
@foxtrot685 ай бұрын
@UndergroundPaintKing hey man thanks for the response!! Yea I'm kinda excited ..I'm doin a 1978 Mustang cobra ll
@jesusmunoz24395 ай бұрын
This is literally me everyone thinks I’m crazy hahaha. What’s crazier is paying $8,000 for a paint job when we got underground paint 👍🏽. Thank you sir I’ve watched all your videos I think I’m ready to start painting my first car.
@UndergroundPaintKing5 ай бұрын
@@jesusmunoz2439 you’re welcome and I’m glad I could help in any way 💯 good luck to you on your project 💪🏾
@robertcharlton1551 Жыл бұрын
Second time through the video it’s alittle more understandable. Thanks for the teaching. You have come a long way since you began making videos.
@UndergroundPaintKing Жыл бұрын
Thanks Robert, I appreciate you watching the videos and I hope they continue to help and it has been a journey for me to get to this point!
@3gcraftsman7 ай бұрын
Great explanation. Simple and to the point. 🙏
@UndergroundPaintKing7 ай бұрын
I’m glad the video was helpful and I appreciate you checking it out 🙏🏽💯
@gregb7840 Жыл бұрын
Great vids...easy to understand and straight to the point...good job bros.
@UndergroundPaintKing Жыл бұрын
Thanks Greg I appreciate you checking out the videos and I’m glad they’re helpful!
@jamesadams34762 жыл бұрын
That was a really informative video upk on setting up the spray guns. Keep up the videos.
@UndergroundPaintKing2 жыл бұрын
Thanks James I appreciate you checking out the video…have a good week my friend!
@coreyhopkins332 жыл бұрын
Great video thanks for all the knowledge you give us bro
@UndergroundPaintKing2 жыл бұрын
Thanks Corey I appreciate that and appreciate you checking out the videos and I hope they are helpful!
@israel929410 ай бұрын
Thank you this video is very helpful. I like the way you take ur time to explain well in detail and the recap going over again not too many people do that, I appreciate you and I give u thumps up and I subscribed.
@UndergroundPaintKing10 ай бұрын
Thanks for subscribing Israel, I appreciate you and I’m glad the video was helpful!
@user-rv9dr4ix6c6 ай бұрын
Thank you for producing a video using the materials in realistic "DIY" budget and showing us how its done like a "UPK Pro". - Paint the world!!
@UndergroundPaintKing6 ай бұрын
Glad I could help and I appreciate you checking out the videos 🙏🏽💯
@johnnycashh71482 жыл бұрын
Good stuff King...keep em coming!! 👊🏼🍻
@UndergroundPaintKing2 жыл бұрын
Will do Johnny Cashh💯 I’ll definitely keep the content coming!
@lancerobbinssr4546 Жыл бұрын
Thank you. So much I really loved this video you helped me out so much with this info Thank You again!
@UndergroundPaintKing Жыл бұрын
You’re welcome Lance, I’m glad the video was helpful and I appreciate you checking it out!
@FacesintheStone2 жыл бұрын
Thank you UPK! Great video!
@UndergroundPaintKing2 жыл бұрын
Thanks Donald I appreciate you checking out the video and I hope it helps!
@lindaalexander71057 ай бұрын
UPK is the best diy channel for painting on all youtube, the best!
@UndergroundPaintKing7 ай бұрын
Thank you Linda, I really appreciate that 🙏🏽💯
@minimanadam Жыл бұрын
Loving ur videos man , very very helpful. I can't wait to learn to paint..then once I learn to weld , I will be able to do everything ! I'm gonna check n watch videos next on howto mix paint and clear coats
@UndergroundPaintKing Жыл бұрын
I appreciate you watching the videos and I hope they help!
@MichaelAngelo-oj7sy2 жыл бұрын
Thanks so much for sharing your knowledge and experience, keep doing you bro
@UndergroundPaintKing2 жыл бұрын
Thanks for checking out the videos Michael I appreciate that and I hope the channel helps!
@gregorymoy71654 ай бұрын
Hello again just surfing the paint shop channels and came across yours and very helpful it is to ... I have a classic car to paint next month and I'm looking for all the info I can find and setting up the compressor has helped me out a lot especialy the pressure gauage near the gun never could find out what it did,. now I know,.. I have subscribed so I'll be watching with interest for more tips and hints,... Thank you..... When you paint the world will you be heading down here to Australia,,
@UndergroundPaintKing4 ай бұрын
I’d love to do some paint work in Australia and hope to do so in the future 🙏🏽💯 I greatly appreciate you subscribing to the channel!
@andrewdennis230 Жыл бұрын
Keep doing what you doing I'm trying to get like you the peoples champ and start my own business I'm learning a lot from your work
@UndergroundPaintKing Жыл бұрын
Appreciate you Andrew and I hope nothing but success to you and your business!
@puppetmasterblaster Жыл бұрын
Thanks King, this is gonna help me a lot!
@UndergroundPaintKing Жыл бұрын
You’re welcome and I’m glad I could help!
@taoisttiger4702 Жыл бұрын
Great video and explanation. I haddnt thought about that before.
@UndergroundPaintKing Жыл бұрын
Thanks I appreciate you checking out the video and I’m glad it was helpful!
@uglobett3 ай бұрын
Thanks for the info I am a novice when it comes to compressors and its set up, this was helpful.
@UndergroundPaintKing3 ай бұрын
You’re welcome and I’m glad the video was helpful!
@PHARRAWAY2 жыл бұрын
Nice information 👌 👍
@UndergroundPaintKing2 жыл бұрын
I appreciate you checking out the video Pharraway!
@LakesideAutobody2 жыл бұрын
Nice video on consistent air flow at the gun. Nice job UPK - have a good week my friend :)
@UndergroundPaintKing2 жыл бұрын
Thanks Jerry I appreciate you as always…have a good week!
@hubertrobinson882511 ай бұрын
Thanks I'm a welder I usually paint my railings and gates that I make thanks for the information I've struggling with getting it done right thank you so much
@UndergroundPaintKing11 ай бұрын
You’re welcome Hubert, I’m glad the video was helpful!
@TheGolfdaily Жыл бұрын
I didn't guess about that air horse volume. Thanks for sharing! 👍
@UndergroundPaintKing Жыл бұрын
You’re welcome and I’m glad I could help!
@checko78na Жыл бұрын
Man great information! Thanks a lot! I have the same compressor and I was worry about it, because I want to paint my truck Toyota tacoma and I wasn’t sure, to use my air compressor to do it was a good idea! Now I know I can do it, Thanks again bro!
@UndergroundPaintKing Жыл бұрын
You’re welcome CHeCKO I’m glad the video was helpful!
@checko78na Жыл бұрын
@@UndergroundPaintKing now I’m watching you video how you set it up your spray gun! Good information bro! Thanks 👍
@UndergroundPaintKing Жыл бұрын
@@checko78na you’re welcome!
@Highway_Chronicles8 ай бұрын
Great video, thanks for showing this.
@UndergroundPaintKing8 ай бұрын
You’re welcome Don, I’m glad the video was helpful!
@schmidt281172 жыл бұрын
Thanks again for a great video!
@UndergroundPaintKing2 жыл бұрын
You’re welcome Chuck I appreciate you checking out the video and I hope it helps!
@okayboy9978 Жыл бұрын
thanks so much your video give me a lot of idea today I've been making a lot of mistakes how to adjust my pressure and when I see your video it help me a lot I've been watching a lot of video on KZfaq I could not find anyone like you appreciate you thank you so much I have 33 gallons every time I paint it drops, I we really need some of your help for adjusting my compressor thank you
@UndergroundPaintKing Жыл бұрын
You’re welcome and I’m glad the video helped!
@IEatMedia3 ай бұрын
Thanks a lot bro! This helped me understand how to set my compressor & sprayer up efficiently! I Preciate ya fam! 💯💯✊🏾
@UndergroundPaintKing3 ай бұрын
You’re welcome and I’m glad the video was helpful to you 💯
@DawgcityClev2 жыл бұрын
Good lookin bruh! Just bought a 26 gal compressor and Spray Gun and needed these tips. Subbed.
@UndergroundPaintKing2 жыл бұрын
Nice!…glad the video helped Paa and I appreciate you subscribing to the channel!
@nigelbarrow6615 Жыл бұрын
Watching from barbados and it really helps me
@UndergroundPaintKing Жыл бұрын
I appreciate you checking out the channel Nigel and hope it continues to help!
@brammathews9186 Жыл бұрын
Thanks Man excellent advice.
@UndergroundPaintKing Жыл бұрын
You’re welcome Brian I appreciate you checking out the video and I’m glad it was helpful!
@user-oz2uh3sq2k3 ай бұрын
Man this video help me out a lot bruh I appreciate you.
@UndergroundPaintKing3 ай бұрын
I’m glad the video was helpful Jerry 💯💪🏾
@wait4it8522 жыл бұрын
I appreciate you making this video I learned a lot
@UndergroundPaintKing2 жыл бұрын
You’re welcome and I’m glad the video was helpful!…I appreciate you checking it out
@trevor99722 жыл бұрын
GAHHHHHH I’ve been looking for this video forever. Thanks.
@UndergroundPaintKing2 жыл бұрын
You’re welcome I hope it helps and I appreciate you checking it out
@SmokeyA552 жыл бұрын
Excellent demo UPK 👍🏿💯
@UndergroundPaintKing2 жыл бұрын
I appreciate you checking out the video Jonathan 💯
@uriel-heavensguardian8949 Жыл бұрын
Thanks for sharing this info!!!!!
@UndergroundPaintKing Жыл бұрын
You’re welcome, I hope the information was helpful!
@AntWells4 ай бұрын
Great video for setting up compressor for spraying.
@UndergroundPaintKing4 ай бұрын
Thanks Ant, I appreciate you checking out the video and I I’m glad it was helpful!
@AntWells4 ай бұрын
@@UndergroundPaintKing I'm gonna do my 96' Ford ranger next with that set up. Just rolled a truck in rust oleum satín black with decent results.
@UndergroundPaintKing4 ай бұрын
@@AntWells nice 💯
@juanrangel99172 жыл бұрын
This was definitely helpful!!!
@UndergroundPaintKing2 жыл бұрын
Glad the video helped Juan and I appreciate you checking out the video!
@lolitabonita08 Жыл бұрын
excellent video, very helpful thanks
@UndergroundPaintKing Жыл бұрын
You’re welcome and I’m glad the video helps!
@MrJamesfree10 ай бұрын
thanks for this video im just starting to paint it help me out today
@UndergroundPaintKing10 ай бұрын
You’re welcome, I’m glad the video was helpful!
@kilam68roe72 жыл бұрын
Another great vid from the peoples champ. We’ll be waiting for your spray gun set up video.
@UndergroundPaintKing2 жыл бұрын
Thanks Kilam68 Roe I appreciate you and stay tuned for the video coming soon
@reaper-hh9eb9 ай бұрын
Very well explained Ty.
@UndergroundPaintKing9 ай бұрын
Thanks I appreciate you checking out the video!
@Peacefullsound12 жыл бұрын
Thank you! This was the video I was asking for and you delivered. I appreciate you showing the people! Can this be done with a compressor with only one gauge? My small hotdog compressor only has one gauge on it.
@UndergroundPaintKing2 жыл бұрын
You’re welcome Shiro I hope the info was helpful and you should be able to do the same with one gauge on your compressor
@joeruiz9029 Жыл бұрын
Again with a great/informative video…
@UndergroundPaintKing Жыл бұрын
Thanks Joe I appreciate you checking out the video and I hope the video was helpful!
@Ram0101082 жыл бұрын
Good vid UPK. Wish I watched a video like this before I had to learn all of that the hard way lol
@UndergroundPaintKing2 жыл бұрын
Lol yeah I thought I should do this video to help people with this issue…appreciate you bro!
@lotfy9472 жыл бұрын
Thanks for this valuable info 😌
@UndergroundPaintKing2 жыл бұрын
You’re very welcome Lotfy I appreciate you checking out the video!
@rogeliogamboa7644Ай бұрын
Sir, thank you for very important information - very helpful for a DIYer
@UndergroundPaintKingАй бұрын
You’re welcome and I’m glad the video was helpful 🙏🏽💯
@natalieelisabeth57678 ай бұрын
Great video! This helped 😊
@UndergroundPaintKing8 ай бұрын
I’m glad the video was helpful Natalie🙏🏽💯
@lurodriguez2682 Жыл бұрын
Learning for you brother thank you!
@UndergroundPaintKing Жыл бұрын
You’re welcome and I’m glad the video was helpful!
@jim99ful8 ай бұрын
thanks for sharing that the great video, and yeah it helped loads.
@UndergroundPaintKing8 ай бұрын
You’re welcome Jim, I’m glad the video was helpful!
@danbarrett611311 ай бұрын
great video thank you for your experience
@UndergroundPaintKing11 ай бұрын
Thanks Dan, I appreciate you checking it out and I’m glad it helps!
@fishpony1211 Жыл бұрын
Another great video!!! Dude im glad i found ur channel. Can u do a video or link maybe uve done it before to setting up ur paint gun. Spray pattern, flow etc. i know its been covered before but ur better at explaining things then the other videos ive seen. Maybe just touch on what the knobs on the gun actually do. I see some ppl spray cars with the front fan pattern thing vertical and some with that set horizontally.
@UndergroundPaintKing Жыл бұрын
Thanks Fish I appreciate you…idk if you have seen this video but if you haven’t it might help kzfaq.info/get/bejne/etWqhNp_ssjYZ4E.html
@jorgehernandez3462 Жыл бұрын
Thank you for the great video appreciate the info sir
@UndergroundPaintKing Жыл бұрын
You’re welcome Jorge, I appreciate you checking out the video!
@SmittysPlace2 жыл бұрын
Appreciate your work man. Taking on paint and body for me is like pulling teeth with a butter knife. Lol. Thanks for the breakdown! Great video.
@UndergroundPaintKing2 жыл бұрын
😂😂😂 walk away from the butter knife…I appreciate you Smitty for checking out the video!
@Tubedog82 жыл бұрын
Excellent!
@UndergroundPaintKing2 жыл бұрын
Thanks Tubedog8 I appreciate that and appreciate you checking out the video!
@marty3553 Жыл бұрын
Thanks for making this video I learned from this
@UndergroundPaintKing Жыл бұрын
You’re welcome Marty, I’m glad the video was helpful!
@rotary1112 жыл бұрын
Thanks for good info.
@UndergroundPaintKing2 жыл бұрын
You’re welcome and I’m glad the video was helpful Robert!
@dr.a7670 Жыл бұрын
Awesome 👌 Great video Thank you so much for sharing the k n knowledge 🙏
@UndergroundPaintKing Жыл бұрын
Thanks Dr A, I appreciate you and I’m glad the information is helpful!
@wcpportfolio2 жыл бұрын
Thanks UPK Good basic info so we don’t hunt around too much for settings. Is that a high flow air hose? I’ve got a HF compressor also and the summit Lvlp gun, just seeing if a hose makes all the difference also. Getting my garage geared up for some painting and learning experiences 💯
@UndergroundPaintKing2 жыл бұрын
You’re welcome Rusty Ryan I appreciate you checking out the video and the air hose I’m using is the Diablo air hose from HF ( I may be wrong on the name ) along with high air flow fittings…I really like these air hoses!
@datdudetheyhate41212 жыл бұрын
Really this channel is the best and UPK is the correct name. Stay up keep up the good work
@UndergroundPaintKing2 жыл бұрын
Appreciate you dat dude They HATE…I’m definitely gonna keep the content coming 💯
@datdudetheyhate41212 жыл бұрын
@@UndergroundPaintKing I’ll be here watching as I get ready to paint mine soon
@UndergroundPaintKing2 жыл бұрын
@@datdudetheyhate4121 ok bro and good luck on your project!
@Basard1007 ай бұрын
your the man. i just got one regulator and thought i would be fine.... guess im goin back to the store!
@UndergroundPaintKing7 ай бұрын
Thanks Basard, I appreciate that 🙏🏽💯
@nobullshiit5682 Жыл бұрын
good job bro that a big help
@UndergroundPaintKing Жыл бұрын
Thanks I really appreciate you, and I’m glad the video was helpful!
@BillyBlaze75 ай бұрын
i am using a 100ft hose so this is very helpful, as always
@UndergroundPaintKing5 ай бұрын
Glad the video was helpful 💯💪🏾
@Gomer87592 жыл бұрын
Excellent instruction
@UndergroundPaintKing2 жыл бұрын
Thanks Gomer I appreciate you checking out the video and I hope it helps!
@Gomer87592 жыл бұрын
I have some diy painting experience but it never hurts to revisit the fundamentals!
@UndergroundPaintKing2 жыл бұрын
@@Gomer8759 the fundamentals makes things a lot easier!
@marty3553 Жыл бұрын
I love your videos
@UndergroundPaintKing Жыл бұрын
Thanks I appreciate you checking out the videos 💯
@christopherlightbourne9979 Жыл бұрын
Good advice!!
@UndergroundPaintKing Жыл бұрын
Thanks Christopher, I appreciate you checking out the video 💯