How to Sharpen Hedgetrimmer Blades

No video

How to Sharpen Hedgetrimmer Blades

Рет қаралды 1,172,872

Күн бұрын

Mark demonstrates two methods for sharpening hedgetrimmer blades, one using a mill file, and the other using a power grinder.
Get replacement parts for your hedgetrimmer here:
www.ereplacemen...
Read this video's repair article!:
www.ereplacemen...
SUBSCRIBE AND NEVER MISS ANOTHER VIDEO!
www.youtube.com...
CONNECT WITH US!
Google+ ► plus.google.co...
Facebook ► / replacementparts
Twitter ► / toolparts
Linkedin ► / ereplacementparts.com
eReplacementParts ► www.ereplacemen...
THANKS FOR WATCHING!
Don't forget to LIKE and SHARE this video to help pass along helpful information to your friends! Your feedback and inquiries are also welcome so let us hear what you have to say with a comment below.

Пікірлер: 122

@ckykiss1 13 жыл бұрын

My dad has had a B&D hedgetrimmer for as long as i can remember, it is safe to say that is his favorite tool. Problem is, it is as dull as can be. Thanks to your video it helped me get it back to top working order and last time he cut bushes out side you should have seen his face light up when it went through like a hot knife through butter, Thanks again for the video Mark.

@opa2125 13 жыл бұрын

Your method of aligning the blades first is great. I sharpened mine without doing this first and it was a pain. Thanks

@Rick20069 9 жыл бұрын

I never knew how to sharpen my hedge trimmer blades! I thought this video was very helpful but wouldn't use a power grinder because it's a little BIG! I would my Dremel Power Hand Tool because it's easier to handle and it has many grinding tools you can use for those small areas hard to get at. Thanks for the great video!

@lastseduction 13 жыл бұрын

Thanks very much for taking the time to add this video. Sure makes it much easier to do myself rather than sending it out to be done by someone else for a lot more money that a mill file costs. Cheers

@1d1hamby 10 жыл бұрын

When doing acres of hedge trimming it is nice to use a piece of sand paper on a steel bar for quick touch ups.

@unoduney 6 жыл бұрын

Thank you for this simple and much needed video.

@besimone1 10 жыл бұрын

Sharpening made easy! Took the fear out of sharpening this tool! Thanks!

@FIXTechGuides 14 жыл бұрын

@1joneswoman You're very welcome, and we're glad to help!

@seadog857 10 жыл бұрын

Very useful video, the wonders of U tube! Much appreciated from rural UK.

@lilg111111 11 жыл бұрын

Great bid. Thanks for taking your time and explaining each step.

@ajtravis6416 10 жыл бұрын

Nice presentation. Simple, even I can follow your instructions!

@limolee007 8 жыл бұрын

After giving my brand new $650 (AUD) Echo hedge trimmers 6 hours of hedging today I appreciated this video! Little tip though if using angle grinder with all those sparks flying around I'd empty the fuel tank first!

@samuelbracamonte8712 Жыл бұрын

Thank you so much for the demonstration, I was afraid I was going to take my blades apart. Sam from Phoenix

@owlluvr612 11 жыл бұрын

Thanks for the clear, concise video. Now I'll see what I can do with what you taught!

@TheMaximumLikelihood 11 жыл бұрын

Thank you very much for that video. It gets to the point and is accurate. A big Dankeschön from Germany!

@drddd1 8 жыл бұрын

Thanks....good video & showed me exactly what I need to do with my dull blade!

@susan1948able 10 жыл бұрын

Thank you. Very easy to follow these instructions. Great presentation.

@FIXTechGuides 10 жыл бұрын

Thank you Susan!

@justingianino2442 8 жыл бұрын

+eReplacementParts.com what kind of grinder and blade do you need?

@honi9 8 жыл бұрын

trustme don't use ANY grinder... they remove way too much material in too much of an uncontrolled manor. unless your a daily metal fabricator and your grinder is an extension of your right arm, then stick to using a fine tooth mill file. Even if you aare competent with a grinder, don't use a grind wheel, use an 80 upto 120gritt sanding flap wheel. This is far better of a smooth lapped surface finish than a grind wheel will give you and will stay sharper longer. But still! You can beat a good hand finish..... With a fine mill file that is. Or even better use a fine oil stone, these can be bought as thin 5-8mm thick stones at around 10to25mm width and 100mm long.

@justingianino2442 8 жыл бұрын

Okay sounds good thank you for your help, also can I use the dremel to sharpen?

@reneebedelyon45 8 жыл бұрын

great job that's the proper way we do the sharpening in the shop

@gartlnwerkln 6 жыл бұрын

good explanation. i think i will try your methods on my next sharpening process. this will save me some money and a lot of time. thank you for your ideas. regards, martin from gartln.werkln

@runningman9436 6 жыл бұрын

Very helpful and easy to follow. Thanks!!!!!

@seveno1 12 жыл бұрын

Thanks ..you made it look easy... well explained ..great video ,,,

@snowy10044 8 жыл бұрын

Very useful and instructive video.

@glynbailey 6 жыл бұрын

Simple and clear. Thanks for posting.

@rmionie 13 жыл бұрын

Great video. Well done and to the point. Thank you!!!

@sherrybatson2451 8 жыл бұрын

Thank you. Nice clear video.

@steveandtrevorseacrestgard4134 10 жыл бұрын

great video, im in Australia. costs here are about $75 aus to get sharpened at a shop. thanks for video. cheers steve

@neville1967 14 жыл бұрын

very good video , saved me having to take it to a shop, many thanks :)

@pmcload 11 жыл бұрын

I used a DeWalt 120-grit flap disk on my angle grinder rather than a true grinding wheel. It really worked well, and left a finer surface. Also, with the blades off, I was able to hone the inside flat surfaces using a knife sharpening whet stone. I can't find any information on adjusting the distance between the two blades, so I'm probably going to try using a 10-15 thousandths feeler gage for the space at each bolt point. Bring on the hedges!!

@edenbridgematt 10 жыл бұрын

Thanks for a very useful video. Off to plug in my grinder right now!

@dowhill1956 13 жыл бұрын

Good Information. Thanks for the video and expert advise. David

@richardgunn4199 11 жыл бұрын

thanks for the great info on the video.. I do a lot of trimming and after a long summer the blade gets dull so I need to get a n ew good file to do it.. thanks Mark

@marksoboruns6716 8 жыл бұрын

Thanks, Mark! Useful video! Could be good idea to make some holder with guides to make angle maintainig easier :)

@smp22 12 жыл бұрын

Great video, thanks! I'm hoping I can sharpen my B&D, the replacement blade assy is almost as much as the machine!

@pcstrattonsr 12 жыл бұрын

Excellent video and instructions. Thank you!

@vlspeer 10 жыл бұрын

Good presentation.

@FIXTechGuides 13 жыл бұрын

@opa2125 Glad we where able to make the job easier for you! Thanks, -Mark

@maniccmike 13 жыл бұрын

cheers guys . good video. lookin for this for while

@robertviejo9048 8 жыл бұрын

yes, great job!!!! Thank you eReplacementParts.com!!!

@noramelikian3027 10 жыл бұрын

Very helpful. Thanks for sharing!

@tropical6969 11 жыл бұрын

i'll fair be doing this monday morning at work. thanx

@efgeeacharetee 9 жыл бұрын

good video. clear instructions. thanks man

@MustangNthusiest 12 жыл бұрын

Thats the answer I needed, I have a electric Clipper with a radius on the inside.

@kanyethi1 8 жыл бұрын

very useful video

@thunderthumbs100 12 жыл бұрын

Thanks for the lesson on sharpening ! I have Craftsman 22' 25cc & I wanted to know how to make the blade move & respond with the throttle ? I pull my throttle & my blade just sit's their ! It's oiled & greased & doesn't cut when trigger is pulled ! What is the problem & how to correct it ? Thank you !

@fyfe89 9 жыл бұрын

Thank you. Very good video know what i am doing now.

@OdinsCloud 9 жыл бұрын

Wish you would of included the coarseness grade of mill file and of the pad you recommend for the angle grinder.

@syllylou77 10 жыл бұрын

Much appreciated. We thought we had to buy a new one already. Do you need to go to "by hand" method when you get down to the last couple of blades because of the sparks or is it still safe to use the grinder. Also do you need to put any oil on them when finished? Thanks a bunch. I'll be thinking of your store when I need new ones.

@memfields 13 жыл бұрын

Great! Thanks for the how to video

@FIXTechGuides 13 жыл бұрын

@Mitterxyz Most trimmers should be about the same. The only real difference I can think of is some machines will have a small, rounded piece at the end of each tooth. On this style you will only sharpen the inner parts of the cutter and not the outer edge. Thanks for watching! -Mark

@RichardR422 8 жыл бұрын

Very helpful. Thank you.

@kevinmilner9066 9 жыл бұрын

A great help. Thanks.

@cadolf3 11 жыл бұрын

And EweTubio, if you are using a four stroke hedge trimmer, the oil reaching the block could be an issue, but most are still two stroke which use mixed gasoline and oil, meaning there won't be a problem with oil reaching the block.

@mooroakash 8 жыл бұрын

Good info.

@rauleyfingers 13 жыл бұрын

Thanks for the great info, u just saved me a $100 on new blades.

@mvann5 11 жыл бұрын

Great video! Very helpful!!!

@indytom826 9 жыл бұрын

great presentation. Now I know exactly what to do.

@terryliddelow5926 10 жыл бұрын

Top Job, thanks

@swimbait1 6 жыл бұрын

I use my dremel with a small barrel grinder bit, works great.

@FIXTechGuides 6 жыл бұрын

Glad to hear it works for you!

@javigali214 12 жыл бұрын

Great video! Thanks!

@PeaceKeeper3 9 жыл бұрын

Thanks for this information ....GOD Blessssssss

@FIXTechGuides 13 жыл бұрын

@Ej29simpson Thanks for watching! -Mark

@rickyj2010 12 жыл бұрын

Very very interesting.

@johncabeceiras6715 6 жыл бұрын

Thank you!

@EweTubio 11 жыл бұрын

Thanx Mate, great video, i didn't even know if you could sharpen hedger blades, going to give it a shot. One concern, when tipping the hedger upside down, do you worry about the oil running into the block? Mine is electric, so i doesn't matter to me. Cheers, Tas.

@toogoofyfunnyhaha 11 жыл бұрын

I found the best way to sharpen is with a Dremel. Attach the grinder on and give each tip two quick passes. Dont grind too slowly or you'll warp the blades.

@agray240 12 жыл бұрын

In your opinion. Is it better to use a file or a grinder to sharpen the blades.

@brucejackson1055 8 жыл бұрын

So how would you clamp the blade to the table when the unit is upside down? Hang the motor over the edge or use a block of wood to level the blade?

@VladTheImpalerTepesIII 8 жыл бұрын

Using an angle grinder on a hedge trimmer is overkill. Either use a hand file or a dremmel with appropriate disc.

@RobertNims 8 жыл бұрын

What about unpluging the sparkplug?

@richheimbach5527 Жыл бұрын

I like that clamp you have. What brand is it & where'd you obtain it? Looks like a handy thing to have.

@moussking7565 8 жыл бұрын

goods explications.

@idjjack 9 жыл бұрын

I Wondered how to sharpen my hedge trimmer,now I,know, How. Thanks, J.B.

@TomCatLyons 6 жыл бұрын

Thanks, really appre iate that. It helps a lot.

@fredflints9830 6 жыл бұрын

Thanks for this. Well done and helpful! I do have a queskin (just teasing) though. What type of oil would you add into the blade assembly? My hedge trimmer instructions just say "fine machine oil". Thanks!

@tladrt48 11 жыл бұрын

well done--THANKS!

@romaspavardenis8511 10 жыл бұрын

thanks for video

@savagenomore 12 жыл бұрын

that's a lot of work that I need to do very soon, my clippers don't cut very well...I'm dreading it

@bernicemartin3604 9 жыл бұрын

very helpful

@mooroakash 11 жыл бұрын

Good stuff!

@awilift 11 жыл бұрын

great vid

@1usaid 12 жыл бұрын

Thank you. I can sharpen away now. I have a sthil machine. Thank you again

@corey01851 11 жыл бұрын

Echo does too

@mountain177 12 жыл бұрын

check the clutch on the engine

@EdStaniszewski 8 жыл бұрын

ever try a 60 grit flap disc?

@WV591 8 жыл бұрын

one of those dremel type tools works best.much easier to control in between the blades.

@aussiegoosebumps 8 жыл бұрын

+WV591 Good thinking, got a dremel electric tool. I will use it.

@WV591 8 жыл бұрын

even easier if your dremel has the flexible shaft attachment and for another 8-10 dollars you can add the chainsaw attachment collar to dremel tool. become a sharpening center :-)

@bornandgianni4203 9 жыл бұрын

merci!man!

@FIXTechGuides 14 жыл бұрын

@neville1967 Awesome.

@dam1041960 6 жыл бұрын

The grinder is the fastest way and is 95% of us outdoor power equip tech use. a former tech. of 15+ years.

@joeburgos7049 12 жыл бұрын

I would never use a grinder ,its extremely hard to control the amount it removes and also the angle not to mention shortening the the life of the blade.

@DanWebster 10 жыл бұрын

Nice. I have a question about a gas powered trimmer that the blades no longer move. What to do?

@newcoyote 9 жыл бұрын

Most likely sap and residue has accumulated on the blades. When it builds up on the surfaces that slide against each other, it will eventually bind them. Blades not only need to be sharp. They need to be clean. Even if the blades still move, gunk puts a lot of load on the engine. Regular use of a resin solvent will prevent this issue. BTW. Do NOT use a power grinder to sharpen like this bozo suggests. This will massively reduce the life of your blades even if you are careful.

@nicolahayward3698 10 жыл бұрын

how easy is that when you no how to do it thanks

@MrTristramj 6 жыл бұрын

Very helpful. I think the hearing protection was way over the top. . lmao

@FIXTechGuides 6 жыл бұрын

Glad it was helpful for you. We always try to be as safe as we possibly can. After all, better safe than sorry!

@davh1231 13 жыл бұрын

i cannot align mine manually on my one like you did.

@Lanninglongarmmowing 9 жыл бұрын

A rotary tool would work also.

@PaddyDixieTheMinerva82 9 жыл бұрын

What, do you mean like a Dremel, for example? With the grinder/sharpening attachment? Thanks

@Lanninglongarmmowing 9 жыл бұрын

TheMinerva82 Yes and yes.

@PaddyDixieTheMinerva82 9 жыл бұрын

Love2boat92 Many thanks!!

@Lanninglongarmmowing 9 жыл бұрын

TheMinerva82 No problem.

@saggioculo 8 жыл бұрын

Would a dremel work instead of the grinder?

@FIXTechGuides 8 жыл бұрын

You can use your dremel or even a file if you're comfortable with it.

@joeguadian3458 11 жыл бұрын

cool thx

@jerryf2426 6 жыл бұрын

PA Lawn Guy. You don't seem to be concerned with the direction the power grinder wheel is turning. Does it not make a difference? Can one sharpen the two seperate and reassemble and then hit them quickly to match?

@FIXTechGuides 6 жыл бұрын

Hi Jerry, it doesn't make a difference on which way the grinding wheel is turning. You can separate them if you wish them match them when they are back together, but this way is much quicker.

@jerryf2426 6 жыл бұрын

Thanks Mark