Hey quick advise from a professional who drives big trucks with manual transmission (Double H 18 gears) for a living. Under normal circumstances i usually start (when fully loaded) with gear 2, go up to 4, change gear group and then 5,6,7,8. if i am empty i start on 4 low go up to 5 high and then either 7 low or 6 high and after that onto 8. or else youre shifting way to much. The gear 1 is only there for manouver or when you need much power and not alot of speed.
@Renekor Жыл бұрын
😵💫
@Wolltazar Жыл бұрын
@@Renekor exactly my words. however, it was a good advice
@_Z1PEX_10 ай бұрын
i hope i never become a truck driver irl this is too complicated
@lofwyr50637 ай бұрын
Bicycles have a lot more gears than 12, usually, and people don't really use the very first either, @@_Z1PEX_ Just look at it like a bike and you'll get it.
@partyflockske6 ай бұрын
or only drive automatics :) @@_Z1PEX_
@survil321 Жыл бұрын
Tutorials straight from proffesional. I like it.
@truckparking2139 Жыл бұрын
kzfaq.infoWZuiOaPjdaY?feature=share
@ňákej_wir Жыл бұрын
I know you showed the gears like that for the purpose of the video, but you can skip gears even if you are loaded. It's faster and less hand movement. Also, i recommend to bind the High/low or split to some button on the other side of the wheel than you shifter is, so you can keep your hand on shifter and don't reach for the button as you do and simply do it with other hand while still holding the wheel :D
@KartikPlays Жыл бұрын
It’s always good to move into neutral before selecting the range, it’s optional for the splitter.
@tony747official Жыл бұрын
Noticed that. But because it doesn't do any harm in ets2, I do it like this, it's less hand movement.
@mclarentech6359 Жыл бұрын
@@tony747official hey I suggest you start a new series where you do comparison or daily or weekly news from truckersmp and SCS like ap101gaming
@tommeiner9983 Жыл бұрын
Both the range and the splitter are "preselect" in real life, so I don't know what you're talking about. You can switch both of them while in gear without any problems.
@handlesrtwitterdontbelivethem5 ай бұрын
@@tommeiner9983 how
@vilenius1873 ай бұрын
@@handlesrtwitterdontbelivethem you can switch the range before shifting and it will change once you depress the clutch. Same with the splitter, say you're driving on 6th gear and you press the splitter, then depress the clutch and bring it up and now you're on 6 1/2 gear
@paulhorne390 Жыл бұрын
Many, many thanks. Just bought a manual truck shifter. Your advice was invaluable. Once again thank you 👍
@Komaticom5 күн бұрын
Thanks from Australia. Got the Logitech shifter and find the split option more convenient with skipping gears
@Titanic4 Жыл бұрын
One thing about Simple Automatic: If the engine shuts down for any reason, the vehicle will brake very hard, regardless of the speed you're driving on. This is especially important when dealing with TruckersMP, since you might brake check someone by accident if the engine dies at very unfortunate moment. For this very reason it's important to make sure that the truck isn't damaged and that you don't run out of fuel while driving.
@Horikon3 Жыл бұрын
Hey tony. For h shifting you don’t need 3 pedals. You can do it even with 2 because nowadays there is an automatic clutch feature 😅
@BlueDomnio77711 ай бұрын
@@Horikon3 Hey, thats not tony
@mclarentech6359 Жыл бұрын
When the world needed him he returned❤🌍
@truckparking2139 Жыл бұрын
kzfaq.infoWZuiOaPjdaY?feature=share
@schaudirnichtmeinprofilbil2324 Жыл бұрын
No?
@mclarentech6359 Жыл бұрын
Yes he did
@jeffrypeffry8107 Жыл бұрын
Do u know why when i use the H shifter the engine won't turn on?
@bacongaming6094 Жыл бұрын
Press e on keyboard
@The_ElonMusk7 ай бұрын
Every time, when I drive in ets 2 I think, when they will add a normally working kickdown (or overdrive) And now, I can use it Thank you, bro
@MR_LPS20 күн бұрын
When I got Logitech G293 with the shifter I didn’t know how to start moving cause I always stalled it but I learned how to start moving by myself. But for all this time I thought I was doing it wrong until I watched this. Thanks Tony
@wakcedout Жыл бұрын
This was actually exactly the kind of video I was looking for. I live in America so unless you are a trucker the average transmission type used is automatic. And I do want to get a wheel for this game but because I don't know how to drive manual at all I wasn't sure how the clutch itself would actually work. And this video seemed to show not only how to use it in this game but I'm pretty sure those same principles apply to the real world. Essentially, ets2 and ats using sequnetial manual will teach me how to drive a manual transmission car lol. At 41, never too old to learn something new.
@PhilDiasPJD Жыл бұрын
Nice video, however if you dont have a clutch, don't map a button/pedal press and the game will automatically use a clutch for you so you can drive a manual truck with a h-shifter. Regards
@bokikoki7 Жыл бұрын
Thank you so much! This helped me a lot. I used to have my wheel set up like how you said but at one point the cable to my wheel died and I stopped using it, recently I got a new cable and just couldn't remember how I had it set up. There was a video I watched but I couldn't find it again. Even though I have a clutch, I prefer the game clutch for me. Thank you so much!
@nadadegamer97308 күн бұрын
Obrigado, amigo! Vim aos comentários em busca de uma resposta como a sua ajudou demais 🙏
@Johhandania8 күн бұрын
THANK YOU. You actually helped me 😭😭
@chegames1 Жыл бұрын
Never heard about that game. so you play and show video of it for last 5 years, wow you are veteran bro
@user06220 Жыл бұрын
Very useful
@truckparking2139 Жыл бұрын
kzfaq.infoWZuiOaPjdaY?feature=share
@Sharkbar_ Жыл бұрын
Thak you, this is just what I needed.
@OzdenOzgun3 ай бұрын
If you have a shifter I reccomend you to go to the nearest service and change your transmission to 6-speed. I tried both 12-speed and 6-speed transmissions. Here're the details: 12-speed transmission: + Has 5 levels of retarder. Easier to slow down the truck without service break. + Slightly better with very heavy cargos and climbing the hills. - Very narrow ranges on low gears. Basically you need to shift up almost every second up to 8th or 9th gear. - You need to push the shifter toggle button and press the clutch pedal for the gear changes and it's boring to do it every time. 6-speed transmission + Very easy to use. + Gear ranges are logical. When you slow down to make a sharp turn you sihft down to 2nd gear and it makes all the sense. With a 12-speed transmission 8th or 9th gear is enough. + You don't need to push a toggle button. It's more natural - Has 3 levels of retarder. 5 level is more fun. - Acceleration is not as good as 12-speed transmission on heavy cargos but definitely maximum speed is NOT slower than 12-speed transmission.
@GTgaming98 Жыл бұрын
Very good tutorial tony keep it up
@jeffrypeffry8107 Жыл бұрын
Do u know why when i use the H shifter it won't turn on my engine
@hamzarebai1231 Жыл бұрын
Thank you for this video tutorial. Well done👍🏻❤️❤️
@jaroslavgedra8557 Жыл бұрын
Best video mate thanks for that ❤
@RyanChainani4 ай бұрын
Having a problem on the A7 shifter on ETS2. When i tried to bind the reverse gear(i pressed the shifter on neutral going to reverse), it replaces my 6th gear. Same goes if i bind 6th gear it replaces my Reverse gear bind. I don't know how to fix it.
@krez1x Жыл бұрын
Thank you so much❤
@scottthebarker4 күн бұрын
thank you
@josefinaalegalis12749 ай бұрын
good video friend thanks for the explanation Could you make a video explaining how to start on very difficult steep climbs or slopes, both in ETS 2 and ATS 2?
@chrishines6048 Жыл бұрын
At the time of this comment I'm currently installing a custom made motor ( designed and engineered by me ) into my wheel and it's still in bits so I'm using my keyboard and when I play ets2 on my keyboard I tend to use real automatic as I feel more comfortable with it but when I use my wheel I use H-shifter
@BigMeechEJ25 Жыл бұрын
Thats awesome good luck on your project. Are you installing a motor for force feedback?
@chrishines6048 Жыл бұрын
@@BigMeechEJ25 yes
@xhoho692716 күн бұрын
Thanks bro
@tumate452 ай бұрын
Funny how the game forced me to use range splitter, because it put me in a scania for a heavy haul and the first two gears were C1 and C2, then 1-4, and if I jumped to the other range the truck got into 11 or 12. That was a miserable experience until I setup the realistic shifter option and suddenly I found the other gear between 4 and 11. After that I had so much fun with the range splitter setup, dont even want to go back now
@adnandemirkiran407 Жыл бұрын
thanks loot bro for your help!! Now can I drive my truck on 12th shift.
@evicol2117 Жыл бұрын
from what I know, irl you should start in 2nd or 3rd if you dont have a heavy load
@tony747official Жыл бұрын
Sure, I mentioned that, but I wanted to go through all the gears to showcase each type
@omerbalbakan3948 ай бұрын
Thank you
@WESAM.WALEEDY11 ай бұрын
You are super awesome ❤
@ronweanysr Жыл бұрын
Love you bro
@JaTeam3 Жыл бұрын
Nice
@TundeEszlari Жыл бұрын
The video was amazing.
@Haddanburg2 ай бұрын
In ets2 you can assign a button for the clutch so do I actually need a clutch pedal or can a just assign the button Edit: I have the same shifter as you but I don't have a clutch pedal I use a Xbox 360 wheel(don't judge). My shifter is recognised but it just does not want to shift
@Sheldon_Busologia_D Жыл бұрын
hi, i am new here, i play Ets2, o Driving good, my truck Is tuning
@InterDimensionalLizard27 күн бұрын
Great video. Thank you. Does ETS2 simulate "rev matching"?
@sibisiddharth4367 Жыл бұрын
You explained perfectly but I don't have driving kit😅 , ln future I will buy this, l will definitely reffer your video👍❤️.
@wakcedout Жыл бұрын
You too lol. Yea after watching this I feel like I could hop into a manual trans car and drive it lol
@FTamino Жыл бұрын
Could you show us how you record the first person stuff with the wheel
@dreamerko Жыл бұрын
How do I engage reverse on the lever if I don't have R there?
@Hans_Ft Жыл бұрын
Why does mine start with c1 and so on? I mean, I got used to it with 2 toggles but how do you get 1to6 instead of my c1 to 4 then 5 to10 and thennnn 11 and 12
@glarenova Жыл бұрын
You've probably already fixed it by now but just incase I'll say it's because you have 12 + 2 speeds and C1,C2 and the +2 speeds. Just change to a normal 12.
@Hans_Ft Жыл бұрын
@@glarenova yea. I also got used to ATS 18 gear XD
@afh._76 Жыл бұрын
How do I change gear to R please ❤
@generalgenecide Жыл бұрын
We want to seeing flying cars, trucks and buses!
@teggsy2165 Жыл бұрын
Odd no simple toggle from low to high when i drove Years ago,Mecedes selected high and low by just going side to side across neutral,Scania had a button under the gear knob both where just a once only toggle switch example 6 high 6 low but to have to toggle every shift is just horrible as shown here but yes it works i guess.
@yws152 Жыл бұрын
could you do a tutorial for your monitor set up?
@wf6188_meggy Жыл бұрын
I use Real-Automatic when I use the mouse to drive. Then, I have parked my truck and should use gear to N will be safe.
@Foxy_2254 ай бұрын
I got a question on how to repair one thing. Even tho I try to go straight my truck turns in one or the other direction. Idk how it happened but its really annoying. It also started turning really weird. Please help
@deroluz58815 күн бұрын
i have 3 pedals, the exact gear shifter as you but when i try to bind my gear number 3 it is the same bind as the accelerator and gear 5 and 6 is the same bind. please help me bro. im on sequenuential for now
@cichi_nandi Жыл бұрын
frumos tutorial, dar acuma asa ca idee de la minutul 4:00 pana la 4:52, cand ii dai drumul la ambeaj smucesti camionul ala daca ar fi real :) ii dai drumul prea brusc, doar la turometru ma uit si imi dau seama, acuma am zis ca idee fiecare joaca cum vrea :) ori cum frumos clip si bafta in continuare pe drumul vietii la truckers mp :)
@tony747official Жыл бұрын
Bruschez doar pana bite point. Ai condus in realitate?
@cichi_nandi Жыл бұрын
@@tony747official desigur ca da, altfel nu ziceam nimic, ori cum nu am zis-o de rau, a fost asa ca intre " colegi " apreciezi fiecare clip pe care il faci, imi pare rau daca a sunat ceva gresit! Te-am si vazut in joc de cateva ori. Face un content foarte amuzant si misto, chiar imi pare rau daca s-a inteles ceva gresit. Mult succes la ceea ce faci ! Toate cele bune colegu 😁
@user-sg4be3ep9g4 ай бұрын
Hi man, I'm really stuck because I have H-shifter and iv the clutch with 6 gears but the truck is stuck in neutral and it's not seeing I'm putting truck into first gear and gently pressing the accelerator
@ismailyazar6200 Жыл бұрын
the same steering wheel that I use, the best thing is that it has a retracting feature
@jeffrypeffry8107 Жыл бұрын
How do u go reverse if there only 6 lines in ur gears?
@ismailyazar6200 Жыл бұрын
@@jeffrypeffry8107 we don't go back we go back🤣😂😁
@o1moose Жыл бұрын
I need an idiots on the road video plsss!!
@Eliotouille Жыл бұрын
Hey Tony ! Thank you for this tutorial and uh I saw once that you drifted without snow, how ?
@toby.elmiger Жыл бұрын
Hey I recently brought the Logitech force shifter and it’s not connecting or showing up in Logitech g hub did this happen to you or do you know anyway to fix this?
@maximjeske76277 ай бұрын
What should i do when i have joy Brake but when in Not make Gas it automaticly brake ?
@davidpribanovic787 Жыл бұрын
Tony can be driver instructor
@weswheel4834 Жыл бұрын
Nice video thanks. On the Scania layout that you showed at 6:19, how come they only use 3 of 6 gear positions (particularly why isn't the top middle position used)? Is it just easier to drive that way? Just wondered, thanks.
@yamen857 Жыл бұрын
Well the setup he used is a bit unrealistic, the real life Scania 12 speed is an automatic, doesn't come in manual. but there is the 12+2 transmission which does come in manual, and that uses 5 positions, reverse, the first 2 gears are crawler gears that are very low ratio so you can have easy starts on uphills if you are carrying heavy weight, then the rest are normal driving gears like he showed. that's how the Scania engineers made it, Volvo is similar but diffirent layout
@sgxbot3 ай бұрын
because its easier to understand if you have 6 gears that are split in the middle then 4 split in 3 or 8 where 4 are split and the other 4 are not. by doing it like this they made it so you have 3 positions with 2 gears on every position and each gear being split into 2. forcing the 4th one in there would make the shifter needlessly complicated.
@bstikkel11 ай бұрын
Thanks for you explaination video. I have two questions, actually now. 1. While togling I thought means switching between two settings, there are two toggle buttons available. How does one switch back to the first 6 gearlevels. Again pressing Toggle 1.? So what for is the Togle 2 button? 2. Do I understand correct, one does always only connect only the first 6 gearbuttons and the reversegear button? Thanks for your reply, if possible.
@Comic_Saens9 ай бұрын
In Range or Split mode, you only need 1 toggle to swap between the set of low number gears and high number gears (or even gears and odd gears). In Scania 12+2 mode, 1 toggle swaps between the low number gears and high number gears just like before, the second toggle allows you to swap between the L and H gears within a single number. 1 toggle swaps between the gear numbers, the other swaps between the gear letters. To get from 1L to 1H you'd only hit 1 toggle, to get from 3H to 4H you'd do the other toggle, to get from 3H to 4L, you'd toggle both. AFAIK the reverse gear is on one of the layouts in Range and Split, and is in both layouts in 12+2.
@elyeeontwitch4533 Жыл бұрын
I play whit a joystick in manual transmission, i hope buy some day a stearing wheel and a shifter
@RikiCatte11 ай бұрын
hi, thanks fir the video, which is your key binding for reverse? (i also have pxn a7)
@Takumi864v25 ай бұрын
2:29 Eaton 13 and 10 are swapped
@rareslogiganaugustin7752 Жыл бұрын
Ești roman
@ab0tube Жыл бұрын
I wanna know how do you hide the stearing on the truck and show ur
@Ronalmagdonall7 ай бұрын
C H E E S E
@fanykamionak3 ай бұрын
Jak si nastavím abych řadil přes spojku
@VipapkStudiosOfficial Жыл бұрын
Are you Charles Leclerc? ;)
@gabriellahalasz9458 Жыл бұрын
Can you please send or show/describe your graphics settings? Thank you in advance and for this fantastic video. I use a Thrustmaster TX Leather Edition wheel. ❤❤💕💕
@callum_b0486 Жыл бұрын
what steering wheel, pedals, and shifter do you use?
@Matty27 Жыл бұрын
The link is in description
@BlueDomnio7774 ай бұрын
1 year old video but. Simple automatic slams the breaks when the engine malfunctions which could get you a ban on truckersmp.
@MiryzengPrimerpc Жыл бұрын
Donde puedo encontrar esos pedales canbio se ven mala calidad son baratos?
@jomardumanat2394 Жыл бұрын
Do you have any suggestion if what compatible usb shifter knob to our pxn v10 shifter? Sample is almar skrs?
@schaudirnichtmeinprofilbil2324 Жыл бұрын
Siuuuuu
@RVXbeats Жыл бұрын
Pls help, i have the pxn v9, when i change gears and go to 6th the max speed is 35kmh please idk how to fix it
@Zervoy Жыл бұрын
Gear 1 and 2 detects as one how can i fix that? it detects it when i Put my shifter middle left where no gear is?
@g31real Жыл бұрын
The Kids in the front: 6 Gears, 1 Clutch Pedal, No Toggle Kids in the middle: 12 Gears, 1 Clutch Pedal, 1 Toggle kids in the back: 24 Gears, 5 Clutch Pedals, 17 Toggles, 13 Reverse Gears, 4 Copies of ETS 3 Everyone who is reading this, please have a nice day ❤
@ThatsPerty Жыл бұрын
How would you slow down to a halt with clutch? Is it as simple as before? Or does it require the use of clutch and gears?
@sgxbot3 ай бұрын
you can engine brake by changing down gears or you just use the retarder. if just wanting to come to a hold you can just use the brake. though you would make the engine turn off. to avoid that just press the clutch. and if you dont want to hold the clutch while braking just press the clutch put the gearbox in neutral and brake normally
@SpixxSnipe Жыл бұрын
and where is toggle shifter bind'
@soullesswolf1316 Жыл бұрын
next: how to mount the steering wheel onto the truck one (i know greenscreen but HOW) :P
@1xrakanx15 ай бұрын
Thx bro So i need to start with shift 2 gear to start moving? Cuz when i start 1 > 2 > 3 etc Truck sound like hnnnnnnnnnnnnnn helllllp 😅
@sgxbot3 ай бұрын
you can skip gears as you see fit. if you are empty starting in 4th gear is fine. if you have cargo loaded it depens on how heavy it is and if you are on an incline. most of the time you can start in 2nd gear. 1st gear is only needed when starting on hills or if you want to maneuvre slowly
@user-sw6ho5hq1m Жыл бұрын
Does the pxn v10 shifter work with any wheel or do u have to use te pxn v10 with it?
@weltmeister Жыл бұрын
I like this but your clutch seems to have springs and it doesn't seem as stiff as a teal clutch so if I get a setup like yours can I change the springs in the pedals?
@tony747official Жыл бұрын
The stiffness is adjustable. I like them lighter.
@vineshparbhudayal792 Жыл бұрын
Tony, what specs do you have in your PC?
@UltimateTornadop6 ай бұрын
i changing gears between 1500-2000 rpm
@bacongaming6094 Жыл бұрын
Is sequinal when you have 2 pedals?
@ronweanysr Жыл бұрын
❤
@XcTrLKiLLrX Жыл бұрын
i have logitech shifter and i do t have toggle
@iovugabi Жыл бұрын
1:28 1:31 1:32 1:32 1:33 1:33
@peoplegameplays.156 Жыл бұрын
Where is the link for the h shifter
@Thunderdiesel Жыл бұрын
can you please do a tutorial on how you get your wheel cam to have no background
@22o2 Жыл бұрын
My gear not changing from neutral.. How to fix?
@Titanic4 Жыл бұрын
If you have assigned clutch and you're using H-shifter pattern, press and hold the clutch pedal while changing gear. At the moment, it's possible to preselect the gear. The game will switch the gear once you press the clutch pedal. In case of real automatic, switch the shifter to "Drive", or "Reverse" position to get out of neutral. In case of simple automatic and you're completely stationary, if you're in reverse gear, stop holding the acceleration key, then press it again to move forward. If you're in forward gear and you want to go into reverse, do the same thing in relation to the key used for applying the brake. Make sure that game's developer console is not open as it will disable all controls while the console window is open, regardless of the controller type.
@Redstoneprofi01 Жыл бұрын
Next time: How to turn your steering wheel :D
@garyruhs9466 Жыл бұрын
you must have missed something, didn't work for me except now I have no reverse for my auto shift 😞
@RaptorBuntarchik Жыл бұрын
Greetings from Ukraine!
@Victortap1 Жыл бұрын
Are you playing on truckersmp? Or what servers?
@floryanhd3444 Жыл бұрын
Wasn't it with the H-Shifter that when you stand and you're in gear and don't press the clutch the truck stalls?
@dafferdonk Жыл бұрын
Yes
@tony747official Жыл бұрын
Nope, sequential was without clutch
@floryanhd3444 Жыл бұрын
@@tony747official I mean with the H-Shifter option of course
@tommeiner9983 Жыл бұрын
Of course it will stall if you're in gear and you stop lol
@peye0unu Жыл бұрын
can anyone tell me how to make engine break to work? i want the truck to stop slowly if i change from 6 gear to 3 gear. is a force feedback setting? or maybe something else? right now if i do this the truck is just continue running whit same speed if i change form a high gear to a lower one
@sgxbot3 ай бұрын
in game there is a button for engine braking you have to bind it and use it when you want to engine brake.
@peye0unu3 ай бұрын
@@sgxbot it was gearbox whit retarder, this was what i was looking, thx anyway
@peye0unu Жыл бұрын
whats the settings for when you are in gear and release clutch and engine dies?
@chrisbernardo2877 Жыл бұрын
have u found the answer for this?
@peye0unu Жыл бұрын
NO! i cant figure out about engine break. i remember in last version of games i could use this. so if i was in 6 gear and i but in 4 gear the speed was decreasing @@chrisbernardo2877
@sgxbot3 ай бұрын
then you just released the clutch to fast...
@venz708 Жыл бұрын
Why does my truck stay in low speed in every gear
@sgxbot3 ай бұрын
because you arent using the splitter?
@REVERZZZ2 ай бұрын
Me play in the defaults settings🤫🤫
@BoX5aled Жыл бұрын
I have a G29 gear shifter how do i shift into 7 and above?
@sgxbot3 ай бұрын
he said that in the video you need to bind the toggles and then use them after the 6th gear and then you have 7-12