How to Skim Coat a Ceiling with a Paint Roller, the FAST & EASY Way

Рет қаралды 264,883

That Kilted Guy DIY Home Improvement

4 жыл бұрын

I'll teach you in depth, how to Skimcoat a Ceiling using just a paint roller and a skim coating blade. I'll teach you how to smooth out an old texture, and leave it smooth, or ready for texture. TOOL LINKS BELOW, Click Show More, or the down arrow for more information.
I'm a 35 year drywall pro having owned Mr Patch Drywall LLC for 17 years. I'm here to pass on my knowledge to you to help you tackle your own home repair projects like a pro to save you money and give you pride in doing it yourself.
If you like learning drywall skills, subscribe but BE SURE to hit the ALL Bell or you won't see notices of new videos.
☑️ DrywallAcademy.com Online Drywall Training Courses from Beginners to Pros ☑️
1- UNDERSTANDING DRYWALL MUDDING MATERIALS - ALL ABOUT Drywall joint compounds including ready mixed, Fast Setting (hot mud), all types of joint tapes, what goes with what, and what doesn't. This is your complete resource for understanding drywall materials.
⭐drywall-academy.thinkific.com...
2- DRYWALL TAPING AND FINISHING FOR BEGINNERS - In this course you will learn how to choose and use the right materials. You'll learn the mistakes that novices often make that leads to failure, and ugly workmanship. I'll teach you how to do it right including all the little details like how to hold your tools right, how much pressure to apply, and the mistakes to avoid. You'll learn some simple repair techniques, as well as the basics of finishing new drywall.
⭐drywall-academy.thinkific.com...
- MY DRYWALL TRAINING EBOOKS -
🟢 Take the next step in learning. Read my new ebook "How to Quickly Improve Your Mudding Skills" at: geni.us/DrywallsecretsEbook
🟢 Learn tips & tricks for spraying Knock Down Texture- geni.us/knockdownebook
🟢 And you'll find even MORE ebooks and guides in my store.
🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒
- - - - - - (we earn 3-5% on these sales, thank you) - - - - - -
☑️ LEVEL5 Drywall TOOLS (Financing Available)
Click the Links below to see the current sale prices
🟢 A good all around Mud pan and knife set- geni.us/ize6U
🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx
🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH
🟢The NEW Drywall taping Banjo is awesome - ?ref=thatkiltedguy
🟢 For a Hawk & Trowel Set- geni.us/urlJsH
🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo
🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6
🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj
☑️ Miscellaneous Drywall Tools
🟢 Radius drywall Sander, great for beginners to pros- amzn.to/3sTRQ3S
🟢 Affordable Texture sprayer hopper that I USE - amzn.to/47PWcYn
🟢 The BEST Texture Knockdown Knife - amzn.to/3sWxKWs
🟢 Vevor Vacuum Drywall Sander - amzn.to/3RGfeLr
🟢 Heavy Duty Mud Mixing drill) - amzn.to/3sQcVMy
🟢 For our full drywall tools store- www.amazon.com/shop/thatkilte...
☑️ TapeBuddy Tools
Mixit Paddle, works with Cordless Drills - US Link- amzn.to/3RgCMGL
🌏 International - geni.us/MixitPaddle
🟢 TapeBuddy simple taping tool - amzn.to/3KN9tVY
🌏 International link geni.us/TapeBuddyTaper
☑️ Miscellaneous Tools
🟢 The BEST SIMPLE Stud Finder I've Ever used- US Link amzn.to/3GdWDQJ
🟢 A nice hard case for the stud finder - US link amzn.to/3GdWDQJ
🟢 The best paint extension pole 2-4' US Link- geni.us/extensionpole
☑️ WEBSITE INFO -You can find a lot more tool links and suggestions, plus bonus information on our website at: www.thatkiltedguy.com
Want to show your support for our channel and help us put out more videos, join our Patreon page at: / thatkiltedguy
#ThatKiltedGuy #Drywalltips #DrywallRepairs #drywallschool #howtorepairdrywall
DISCLAIMER : TKG Enterprises LLC, cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, or any obligation for future assistance. Watching the video does not form a professional relationship or constitute receiving professional advice.

Пікірлер: 200

@ThatKiltedGuyDIY 6 ай бұрын

Tool links below. ☑ Attention all Drywall enthusiasts! Introducing the Drywall Academy, your ultimate online destination for mastering the art of Drywall. Whether you're a complete beginner or a seasoned professional, our comprehensive courses cater to all skill levels. At The Drywall Academy (drywallacademy.com), we believe that knowledge is the key to success. That's why we are meticulously curating a vast collection of courses, featuring hundreds of lessons, covering everything from the fundamentals to advanced Drywall business building skills, texture application, texture matching, and much more. Founded by Guy Purcella (That Kilted Guy on KZfaq) with 40 years of experience. With our easy-to-follow text and video lessons and practical demonstrations, you'll gain the confidence and expertise needed to tackle any Drywall project with ease, less frustration and a better quality job. Don't miss out on this golden opportunity to level up your Drywall skills. Join the Drywall Academy today and unlock your true potential in the world of Drywall. Visit drywallacademy.com now and embark on a journey towards mastery! 🚀 And if you are confused about which drywall tools and materials you need, pick up my Drywall Tools and Materials book on Amazon at: amzn.to/3T4eEZg Or for a signed or Spiral bound version visit www.ThatKiltedGuyStore.com Watch this Playlist called Taping & Mudding Drywall School NEXT- kzfaq.info/sun/PLCrazHylAOEndyM-LGT6PtbGfIYD5uiy- ☑ Get my 56 page Free eBook "Understanding Drywall Tools and Materials" at www.DrywallToolsBook.info ⭐⭐ ⭐ Please Visit my sponsors below, they help me afford to put out these videos ⭐⭐⭐ ☑ DO YOU VALUE YOUR INTERNET PRIVACY? I do. You can surf anonomously with Surfshark- geni.us/getsurfshark ☑ Protect your home or business with Simplisafe, we love it- share.simplisafe.com/x/qobGJE ⭐ MY DRYWALL TRAINING BOOKS FOR SALE at www.ThatKiltedGuyStore.com ⭐ ☑ WEBSITE INFO -You can find a lot of bonus information on our website at: www.thatkiltedguy.com 🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒 - - - - - - (we earn 3-5% on these sales, but these are tools I recommend thank you) - - - - - - ☑ LEVEL5 Drywall TOOLS (Financing Available) 🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo 🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6 🟢 A good all around Mud pan and knife set- geni.us/ize6U 🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx 🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj 🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH ☑ Miscellaneous Drywall Tools 🟢 Radius drywall Sander, great for all- geni.us/Radiussander 🟢 Affordable Texture sprayer hopper that I USE - geni.us/Hopper 🟢 The BEST Knockdown Knife - geni.us/KDKnife 🟢 Vevor Vacuum Drywall Sander - s.vevor.com/bfQtGq 🟢 For our full drywall tools store with my suggestions- www.amazon.com/shop/thatkiltedguydiyhomeimprovement ☑ Miscellaneous Tools 🟢 The BEST SIMPLE Stud Finder I've Ever used- geni.us/FranklinStudFinder 🟢 A nice hard case for the stud finder - geni.us/FranklinCase ☑ Miscellaneous supplies 🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - geni.us/Gardz DISCLAIMER : That Kilted Guy Video Productions LLC, cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, or any obligation for future assistance. Watching the video does not form a professional relationship or constitute receiving professional advice.

@shadronayne8760 3 жыл бұрын

Thank you so much, we fixed our peeling ceiling and the tools and tips you recommended were immensely helpful. Appreciate all the help, what an excellent find, your channel is a gem! Thanks again!

@paulmcdonald3570 4 жыл бұрын

Thanks for the education my friend! I really appreciate it. I love learning all these techniques. Your a great teacher!

@ThatKiltedGuyDIY 4 жыл бұрын

Thank you!

@GTAHomeGuy 2 ай бұрын

LOVE that you were candid with what happened and how you didn't trust plastic with your money!

@KCChief1204 10 ай бұрын

This guy is the bomb! I was looking for a video like this to explain how to retexture after removing popcorn ceiling. And with this method the stomped texture is made with the same tools 👏🏻 THANK YOU Kilted Guy 😎

@toninoel2122 2 жыл бұрын

Thank you so much for these videos. They make it easy to follow. I purchased all the tools, prepped the room and watching this one more time before we start today! Started with pop corn going to flat!

@ifthefooshitswearit.8384 Жыл бұрын

How did it turn out and what issues did u come across in doing your project.

@huntereveland9430 3 жыл бұрын

I love your tool kilt! That thing is freaking awesome. Thank you for the tutorial :)

@davesenor3146 4 жыл бұрын

Always love your videos!! Thanks, this is actually my next home project, I always learn a lot from you. Keep safe!!

@ThatKiltedGuyDIY 4 жыл бұрын

Thanks, you too.

@kimorosa1558 3 жыл бұрын

Thank you Brahdah i’m definitely going to try your technique tomorrow thanks again take care of yourself aloha🤙🏽🤙🏽

@randyschmuki3055 4 жыл бұрын

Very useful information for me Guy, I May have to do this in my living room- dining room and hallway area and re textue with the stomp method. it looks like a messy job even with the right tools.

@ThatKiltedGuyDIY 4 жыл бұрын

Putting texture on the ceiling is definitely messy. You will be covered in a light splatter and it will drip everywhere. But it washes off really easy so not that big of a deal. So you don’t really even need clothing for protection

@pjmnica 6 ай бұрын

Always a pleasure to see you work.

@armaganturkyilmaz9288 2 ай бұрын

Thanks for your informative videos. I love all so much. You're a LEGEND.

@Josephwhitfield-cs7cl 11 ай бұрын

those purdy frames & boxs are the best, took me 20 years to finally get one buy I love the setup it's sweet & only cost about $100

@DMVHouseRadioOne Жыл бұрын

Thank you Airmen! Your a life saver! I desperately needed this!

@chadwilliams6150 2 жыл бұрын

Great technique and Great video! Thanks again for your videos!

@8-bitzeven920 2 жыл бұрын

I have done this myself. It can be messy and I guess I lucked out with the painted aspect if the ceiling because all I had was spray bottle and I think it was scraper or maybe it was a trowel, it's been awhile,, but the popcorn came off so quick and easy.

@antypanag1 4 жыл бұрын

so many valuable advices in a so small vid - thank you soooooo much !!!!!!!

@ThatKiltedGuyDIY 4 жыл бұрын

Glad it was helpful!

@jacobibanez7554 3 жыл бұрын

Thank you very much. I love your videos.

@MrLookingtolearn 4 жыл бұрын

Hi Guy, so sorry I missed your premiere, but you still #DOITRIGHT Glad to see you are feeling much better. Great vid :)

@ThatKiltedGuyDIY 4 жыл бұрын

Hey. thanks. Still working on getting my energy back but yeah, I’m feeling quite a bit better. They say it could take weeks to months to get fully over it.

@marybethoneal1962 3 жыл бұрын

Great tips! Thanks 👍

@billyduke8082 3 жыл бұрын

You are truly a skilled craftsman

@ThatKiltedGuyDIY 3 жыл бұрын

Thank you

@ThatKiltedGuyDIY Жыл бұрын

Have a Question? Join My KZfaq Membership to get PRIORITY Replies, perks and more. kzfaq.info/love/SinsqowcKxmSaKkx3W9_0wjoin Ready To Take Your Skills to the Next Level? (Open this) ⭐ MY DRYWALL TRAINING EBOOKS ⭐ 🟢 Take the next step in learning. Read my new ebook "How to Quickly Improve Your Mudding Skills" at: geni.us/DrywallsecretsEbook 🟢 Learn tips & tricks for spraying Knock Down Texture- geni.us/knockdownebook 🟢 Guide to Drywall Sandpaper, what to use, when etc- geni.us/SandingGritGuide 🟢 And you'll find even MORE ebooks and guides in my store. ☑ DRYWALL COURSES- Sign up for our email list to be notified of future Drywall Courses you can take, AND we'll send you a discount offer each time we release a new course. Sign up at: www.thatkiltedguy.com ☑ WEBSITE INFO -You can find a lot of bonus information on our website at: www.thatkiltedguy.com 🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒 - - - - - - (we earn 3-5% on these sales, thank you) - - - - - - ☑ LEVEL5 Drywall TOOLS (Financing Available) For 10% OFF Any tools, enter the code KILTEDGUY10 🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo 🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6 🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH 🟢 A good all around Mud pan and knife set- geni.us/ize6U 🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx 🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj 🟢 For a Hawk & Trowel Set- geni.us/urlJsH ☑ TapeBuddy easy Novice Drywall Tools 🟢 Mixit Paddle - geni.us/MixitPaddle 🟢 TapeBuddy simple taping tool - amzn.to/3KN9tVY 🟢 TapeBuddy Taper, mixer and bucket scoop- amzn.to/38UdUkm ☑ Miscellaneous Drywall Tools 🟢 Mesh Tape dispenser (optional) - geni.us/Meshtapegun 🟢 Radius drywall Sander, great for beginners or pros alike- geni.us/Radiussander 🟢 Affordable Texture sprayer hopper that I USE - geni.us/Hopper 🟢 The BEST Knockdown Knife - geni.us/KDKnife 🟢 Rubber Skimming blade mentioned in other videos -geni.us/rubberblade 🟢 Wen Vacuum Drywall Sander (Good one for a low price) - geni.us/Wensander1 🟢 The Dewalt Mud Mixing Drill I use (super tough) geni.us/DewaltMudDrill 🟢 For our full drywall tools store- www.amazon.com/shop/thatkiltedguydiyhomeimprovement ☑ Miscellaneous Tools 🟢 The BEST Stud Finder I've Ever used- geni.us/FranklinStudFinder 🟢 A nice hard case for the stud finder - geni.us/FranklinCase 🟢 The best paint extension pole 2-4' (for the sander above too)- geni.us/extensionpole 🟢 A quiet compressor for the texture hopper- geni.us/mycompressor ☑ Miscellaneous supplies 🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - geni.us/Gardz 🟢 Drywall Mesh tape - geni.us/Meshtap ☑ Strait Flex cornerbead and specialty repair tape 🟢 Strait Flex Mud Pro- homedepot.sjv.io/babRXk 🟢 Strait Flex Perfect 90 (forms in/out corners at any angle)- homedepot.sjv.io/y2g60V 🟢 Strait Flex Outlet Patch - amzn.to/3JtsFJK 🟢 Strait Flex Multi Patch - amzn.to/3n6m3JI 🟢 Strait Flex Crack Tape - homedepot.sjv.io/6eW5DK ☑ My Camera Gear 🟢 Sony A6400 Camera. (I have 3 they are so good)- geni.us/SonyA6400tkg 🟢 My Wireless Lav mics, AWESOME mics- geni.us/1wVNfJy 🟢 GoPro Hero 9 - geni.us/ocAa Thank you for being part of my channel.

@tombocchino6889 3 жыл бұрын

i really wish i had a guy like you to work with

@Ocanadakiter 4 жыл бұрын

Great idea for the handle. I have the same blade. Will check back later for the video

@ThatKiltedGuyDIY 4 жыл бұрын

Yeah, I didn't want to buy a new handle when I have a lot already. This worked fine for this instance.

@Ocanadakiter 4 жыл бұрын

@@ThatKiltedGuyDIY awesome.. i will have to try it out. I find L5 handle is not strong enough for the bigger blades . I still use it but I'm sure its going to break eventually.

@timejumper8003 2 жыл бұрын

I had a 18" fall apart once too. Over tighten them wing nuts with a pliers and they are fine.

@ThatKiltedGuyDIY 2 жыл бұрын

Sign up for our email list to be notified of future Drywall Courses you can take, AND we'll send you a discount offer each time we release a new course. Plus ou can find a lot of bonus information on our website at: www.thatkiltedguy.com Become one of our supporting members on Patreon at: www.patreon.com/ThatKiltedGuy 🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶🔶 🛒 LINKS TO OTHER ITEMS IN OUR VIDEO- 🛒 - - - - - - - - (Don't forget to Subscribe too) - - - - - - - - - - 🟢 For the entire line of Level5 Drywall Tools- www.level5tools.com/catalog?via=thatkiltedguy For 10% OFF, enter the code KILTEDGUY10 🟢 24" Metal Skim coating blade (Plus other sizes) - www.level5tools.com/products/drywall-skimming-blade-24?via=thatkiltedguy 🟢 A good all around Mud pan and knife set- www.level5tools.com/products/deluxe-stainless-hand-tool-set?via=thatkiltedguy 🟢 The BEST Stud Finder I've Ever used- amzn.to/3qoNx9U 🟢 A nice hard case for the stud finder - amzn.to/39vZx2p 🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - amzn.to/2L3tl9V 🟢 Drywall Mesh tape - amzn.to/38HUxIQ 🟢 Mesh Tape dispenser (optional) - amzn.to/2UpnSyn 🟢 Radius drywall Sander, great for beginners or pros alike- amzn.to/2WAxcjd 🟢 The best paint extension pole 2-4' (for the sander above too)- amzn.to/2HOc1qS 🟢 Affordable Texture sprayer hopper that I USE - amzn.to/2L1jWjb 🟢 The BEST Knockdown Knife - amzn.to/3bKkYPV 🟢 A quiet compressor- amzn.to/2UnMtUg 🟢 Rubber Skimming blade mentioned in other videos -amzn.to/2HdaN76 🟢 Wen Vacuum Drywall Sander (Good one for a low price) - amzn.to/35Idmd0 🟢 The Mud Mixing Drill I use (super tough) amzn.to/3dUhMQZ 🟢 For a 4 bladed mixer like mine-www.level5tools.com/products/mixing-paddle-long-32?via=thatkiltedguy 🟢 For Full sets of Automatic Taping Tools- www.level5tools.com/catalog/full-taping-finishing-sets?via=thatkiltedguy 🟢 For a mixer you can use to mix up a pan full at a time- www.level5tools.com/products/mixing-paddle-short-13?via=thatkiltedguy 🟢 For our full drywall tools store- www.amazon.com/shop/thatkiltedguydiyhomeimprovement ⏩ OTHER MUDDING & REPAIR VIDEO PLAYLISTS ⏩ ✅ Drywall Textures - kzfaq.info/sun/PLCrazHylAOEk4mixQ2IHezYSvJtlu7kVD _________ ✅ Skim Coating - kzfaq.info/sun/PLCrazHylAOEn0VW1xVLpJ_yLO3yPQKDJA _________ ✅ Popcorn Texture Videos - kzfaq.info/sun/PLCrazHylAOEnc06BFyXEpNX_SapMYj_g3 _________ ✅ Detailed Guide on spraying texture after doing a repair- kzfaq.info/sun/PLCrazHylAOEk4mixQ2IHezYSvJtlu7kVD ⭐⭐ ⭐ HOW TO SHOW YOUR SUPPORT FOR OUR CHANNEL ⭐⭐⭐ Like all KZfaq Creators, we rely on your support to allow us to spend thousands of hours a year, and thousands of dollars putting out these videos. If you appreciate our free videos, or I've saved you money, you can show your support by visiting our website at: www.thatkiltedguy.com Thank you for being part of my channel.

@mgreggrier778 2 жыл бұрын

G.O.A.T......The man, The myth ,The legend

@jaxflfreebird Жыл бұрын

OK Guy, I ordered a 24" Level 5 spreader thing, an adapter and an extension handle. Hopefully with this thing I will be able to smooth out the mud once I spread it on the way you did. I have already put up at least one layer of mud onto my bathroom ceiling. That I did mostly with a 6 inch knife. It's impossible to work on my bathroom because there is no room. I have a base coat that is now stuck to the ceiling. I scraped and sanded it with one of those round sanders you showed. I had a rectangular one first and that is honestly the most USELESS and cussworthy piece of junk I have ever spent money on. I appreciate the videos.

@ThatKiltedGuyDIY Жыл бұрын

The rectangular one just takes practice. It's the main one I use

@joesask857 3 жыл бұрын

THANKS MAN

@sadieh.5138 2 жыл бұрын

Thank you Guy! I've been watching drywall videos for over a year and yours are the BEST!

@ThatKiltedGuyDIY 2 жыл бұрын

Thanks, I appreciate that 😎, & Thanks for subscribing!

@spencercolgan 3 жыл бұрын

you have an amazing touch with that to make it smooth with that pole

@ThatKiltedGuyDIY 3 жыл бұрын

Thanks

@spencercolgan 3 жыл бұрын

@@ThatKiltedGuyDIY Before I buy one of those for the ceiling, do you think that they would give me one for free? Do you have their phone number? I looked on your video details to see the company but maybe they’ll give me one instead of me spending $149 for it

@ThatKiltedGuyDIY 3 жыл бұрын

@@spencercolgan I don’t know, but honestly it took me until I had about 50,000 subscribers to start getting free stuff.

@brittharms978 3 жыл бұрын

AWESOME!!!!

@rla1000 3 жыл бұрын

21:40 I've discovered that by using a shop vac bag for drywall dust, the filter stays 99 percent clean with no clogging, and the drywall dust drops to the bottom of the bag. I can sand for days before the filter bag begins to get too heavy to move around easily, then I change the filter bag. The filter itself stays clean. This is perfect for an amateur like myself who isn't a pro taper who would have far less sanding to do.

@miroslavvalchev7945 11 ай бұрын

Can you explain a little more interest in that😅or upload a good video 😅

@rickkyriakopoulos1103 3 жыл бұрын

Take care of your health my brother 👊

@Iamuprise74 3 жыл бұрын

Use a texture roller it works.beag and easy to wash n reuse. Spread the mud like paint. Start in the middle of the area your applying it then go back n forth to spread it.

@liztaylor85139 Жыл бұрын

I just adore you!!!!

@ThatKiltedGuyDIY Жыл бұрын

Thank you. Guy

@vawilson30 3 жыл бұрын

As a baker, I always kneed dough on "feel"... if it feels right, it is right. Is that what it is like for you and mud? How would you describe a good "feel" for mud when skimming away a textured paint surface? An all-around good bread feel is soft, elastic, and just dry enough that it may stick to your fingers but doesn't. Watching you mix that bucket reminded me of my doughs. Well wishes to you and your family, I hope this finds you in better times! Hugs!

@ThatKiltedGuyDIY 3 жыл бұрын

That’s what it’s like. Thick shrinks less and goes on thicker, but it’s harder to work so I thin it down until it feels good.

@matthewhamlin9872 4 жыл бұрын

Another question on skim coating. After I finish the skim coat and put my new texture back on, you mentioned priming then paint. Is priming necessary and what is the purpose? Thanks. Great video’s.

@JobeStroud 2 жыл бұрын

I just saw this was 2 years old. I will still answer. You prime it so it doesn't absorb the paint. Even paint primer mix the texture can and will absorb some of the paint. Plus priming it truly seals the texture and prevents loose texture from getting stuck in your roller.

@pcno2832 4 жыл бұрын

3:02 Unless you have a very good dust collection system, you might want to wet-sand the ceiling, especially if it was first textured before the late 1970s. My 1959 ceiling probably had asbestos, so I just kept dipping the pole sander, with a fiberglass sanding sheet, in a bucket of water, so the asbestos went down the drain.

@ThatKiltedGuyDIY 4 жыл бұрын

Actually, when sanding a painted surface, you shouldn't be stirring up much at all, just scratching the top layer and knocking off a few peaks. But I do advise wearing a good mask anyway. But that wet sanding method would work too.

@msdinba 2 жыл бұрын

You videos are the best. Thank you. In your experience when going from knock down texture to smooth do you recommend doing the ceilings first, followed by the walls? Do the walls get messed up badly if your start with them then do the ceiling? Ceilings just look harder.

@ThatKiltedGuyDIY 2 жыл бұрын

I’d do both at the Same time

@simpsonsampson7662 3 жыл бұрын

Great video. I was wondering what you would recommend for skim coating lath and plaster walls? They have wall paper and will get removed before skimcoating..

@ThatKiltedGuyDIY 3 жыл бұрын

Sand well, dust then use regular weight all purpose

@jessemixon3135 2 жыл бұрын

I appreciate your skills and knowledge and sharing these with others, I like wet sand- do you ever do that , if so what tools do you use for that, other than a sponge?

@ThatKiltedGuyDIY 2 жыл бұрын

Watch this- kzfaq.info/get/bejne/b8CkqMedmLKtmJc.html

@liztaylor85139 Жыл бұрын

Can I use my tile mixing gun with w/paddle? Should work just as good and I believe it's more heavy duty?

@ricosrealm Жыл бұрын

great video, watched it twice. can you roll on the mud like you do here and then do a heavy knockdown without doing a skimcoat first? just want to cover defects with the texture... ceilings are not uneven but there are some dimples from nails.

@ThatKiltedGuyDIY Жыл бұрын

If your covering up texture, skim coat it first, and re-texture after it dries is the only way

@drusch72 7 ай бұрын

I’m working on textured drywall on skylight walls that are damaged due to a small leak fixed by new flashing outside on roof around skylight. Because off your wonderful teaching videos I realized this house has STOMP BRUSH TEXTURE ON CEILINGS. My question is: CAN I USE THE PINK DAP DRYDEX HEAVYWEIGHT SPACKLING (water it down a small bit) FOR SMALL 6 INCH BY 6 INCH PATCHING JOBS? Once I get spot fixed and re-textured I will paint over those inside stomped brush walls of the skylight.

@ThatKiltedGuyDIY 6 ай бұрын

Honestly I hate that stuff for texture but in a pinch you can use it

@vawilson30 3 жыл бұрын

Another question.... when mud/compound/spackle is being put up, at what point do you need to stop? Its like a line has been crossed and if you mess with it, you will mess the whole thing up. Sure we can sand it... we can ALWAYS sand lol... but sometimes its hard to say "Stop messing with it, you are gonna make it worse!" My motivation is I have a small broadcast studio and would like to do more set building.

@ThatKiltedGuyDIY 3 жыл бұрын

Stop when it looks fine and before it starts drying out and becomes difficult to use

@Rikkcas 4 жыл бұрын

Happy Easter Guy! 👊🏼🙏

@ThatKiltedGuyDIY 4 жыл бұрын

Thank you 😊

@markstevenson195 3 жыл бұрын

Great Video! QUESTION: Your opinion on priming? I will be skimming a painted 1940s plaster ceiling that that peeled paint terribly. I have cleaned, scraped and sanded it for skimming (alot of work!). I have read that the plaster ceiling should be primed with oil primer before skimming compound to plaster AND after the compound oil primed after skimming before paint. I actually think the original paint peeling was because the person skimmed with compound, didn't prime after and then painted. This peeling has happened in a few large places in the home's ceiling for some unknown reason.

@ThatKiltedGuyDIY 3 жыл бұрын

Well not seeing it, I'd say yes prime it with primer, but I only use oil base for heavy duty stain blocking. They have great bonding primers now that are water based like Zinsser Bullseye 123. But, I would sand it first with 80 grit or coarser to give the primer tooth to bite too. Hey, sorry I'm late in replying, sometimes I just miss a comment somehow, but if this helped you I hope you'll consider joining my KZfaq membership to help support our channel, but also to get bonus early release videos and members only content. You can join by clickiing the JOIN button by the subscribe button on any video, or on my home page. Thanks, Guy

@whirlwind8825 2 жыл бұрын

Do not use oil base with joint compound .. never use oil base anything when you are skimming.. Water based compounds do not adhere to oil. You scrape it til all the loose stuff comes off. Then you use a primer sealer water based like PPG gripper. After gripper is applied the mud sticks and you use less because the wall or ceiling is sealed ... Then you skim the ceiling and then prime it again with gripper then you will use less paint because the ceiling is sealed with the sealer in the primer ... And if you have heavy stains use the kilz with the tan label ( Kilz Premium 3) that is water based it will block all stains ... do not use the blue label kilz because its cheaper ...

@inandoutfinishing Жыл бұрын

Is that main weapon when you do ceiling? Or just introducing?

@clenilma100 10 ай бұрын

Made life easier

@jenniferblack9329 3 жыл бұрын

I apologize if I missed it but you mentioned using super bond mixed in with the mud but I didn't catch how much you added?

@ThatKiltedGuyDIY 6 ай бұрын

I can't remember and that's been years so I would just read the bottle instructions

@matthewhamlin9872 4 жыл бұрын

What grit sandpaper do you use to prep the ceiling for skim coat? How much sanding do I need to do?

@ThatKiltedGuyDIY 4 жыл бұрын

Matthew, 60-80 grit, sand just enough to knock off the bumps, so about twice over each area, but overlap as you go.

@christysackett6986 2 жыл бұрын

Do you use the Plus 3 for skim coating over the popcorn ceilings as well? Or does it not work great for that?

@ThatKiltedGuyDIY 2 жыл бұрын

I do

@patdarling2036 2 жыл бұрын

How do you price out for all you done on this ceiling

@richardwebb9400 Жыл бұрын

I love your 54 chevy

@jamesboston782 3 жыл бұрын

So no need to clean off the dirt and grime before the skim coating? Seems crazy not wiping the walls down with some time of cleanser. Especially in a kitchen. Please advise.

@ThatKiltedGuyDIY 3 жыл бұрын

Yes, best to vacuum or dust but some will always be there when sanding drywall mud, and it will blend into the new mud.

@gme10955 3 жыл бұрын

Have you ever used this roller method for skimming over a ceiling that has that old swirl texture on it? I'm thinking it will probably require using a pan and knife so that thicker mud can be applied. It's going to get a heavy splatter texture, so hoping one coat will cover. And thank you for putting out the most detailed and comprehensive videos about drywall on KZfaq.

@ThatKiltedGuyDIY 3 жыл бұрын

check out the thumbnail on this video. When I did skim coat that ceiling, I did it with a knife because you can’t put it on thick enough with a roller. kzfaq.info/get/bejne/fJuHbLydt7isnqM.html

@gme10955 3 жыл бұрын

@@ThatKiltedGuyDIY Perfect, thank you!

@ds7766 10 ай бұрын

do you have a link to the plaster you use for skimming? whats the best for beginners?

@ThatKiltedGuyDIY 10 ай бұрын

Hello, it's not plaster, it's drywall joint compound. I use USG Plus 3 found in most big box stores in the US

@sunshinegypsea 2 жыл бұрын

Would you use the plus 3 or the bucket with the green lid to skim coat orange peel walls?

@ThatKiltedGuyDIY 2 жыл бұрын

I’ve used both. The green lit all purpose is often too thin so I usually use +3.

@rhondawatters7570 Жыл бұрын

We have 1982 popcorn ceilings, no paint. Can't I use a pole sander and just "knock off" some of the popcorn to have a more "orange peel" effect and then paint it? I really, really don't want to spend a lot of time/money on our older home, but it would be nice to update a bit.

@ThatKiltedGuyDIY Жыл бұрын

I've seen it done. It's not going to look great but will look different.

@user-yr5er2vk1p 7 ай бұрын

Can you prime over painted surfaces before skimming, instead of sanding? Should you prime any surface before skim coat?

@ThatKiltedGuyDIY 6 ай бұрын

If it’s a high bonding primer, yes.

@lakestatebullies7391 2 жыл бұрын

Doesn't that porter cable have a filter rake? Ours has a tab you pull out and push in and it gets the build up off the filter..

@ThatKiltedGuyDIY 2 жыл бұрын

That only cleans the pleated filter and does nothing to the paper filter. My dust Deputy method works 100 times better than without it

@markjones8965 Жыл бұрын

Hi I am based in the UK, what is the make and name of the rubber blade you use for leveling your cealing in the video, thanks.

@ThatKiltedGuyDIY Жыл бұрын

Should be in the description

@JoseP-ut9jz 4 жыл бұрын

Nice...!!!

@ThatKiltedGuyDIY 4 жыл бұрын

Thank you! Cheers!

@liztaylor85139 Жыл бұрын

I'm on a budget but doing my entire house remodel walls/ceilings. Will need to sand. VERY bad work and water damage to repair. Can I get the cheaper sander with just the hose and hook it to my shop vac?

@ThatKiltedGuyDIY Жыл бұрын

If you have a good shop vac

@Miguel.Garcia 2 жыл бұрын

Hey Guy, how did you attach a regular paint pole to the level 5 handle attachment?

@ThatKiltedGuyDIY 2 жыл бұрын

That’s been a few years and I honestly can’t remember. I now own the level five extension pole and have decided it is worth the money.

@Miguel.Garcia 2 жыл бұрын

@@ThatKiltedGuyDIY Thank you!

@razerburn4216 3 жыл бұрын

Why not use wespac all purpose it all ready has the glue in it just bit harder to sand BTW great video like always stay healthy 👍

@ThatKiltedGuyDIY 3 жыл бұрын

I think pretty much any regular weight all purpose has more glue in it. I just buy almost nothing but plus 3 and add glue when needed.

@terryvaughn7762 3 жыл бұрын

Could you do this over a popcorn ceiling?

@ThatKiltedGuyDIY 3 жыл бұрын

Yes, search for my video on skim coating popcorn ceilings

@Nova-cb3fv 5 ай бұрын

I found my popcorn cielings are painted. There goes my removal plan. Can I use this technique on popcorn cielings?

@ThatKiltedGuyDIY 5 ай бұрын

Search for, “skim coating Popcorn ceilings that tilted Guy“ and you’ll see I have videos about it

@ThienTran-xl4ey 3 жыл бұрын

when you're just skimming two coats, how long do you wait to do the 2nd coat? Do you wait 24hr for it to cure?

@ThatKiltedGuyDIY 3 жыл бұрын

When it’s mostly white it’s dry enough to coat again

@ThienTran-xl4ey 3 жыл бұрын

@@ThatKiltedGuyDIY thank you

@mikes427 4 жыл бұрын

I’m concerned about asbestos/lead paint in the popcorn, wont sanding the paint prior to the skim coat generate hazardous dust?

@ThatKiltedGuyDIY 4 жыл бұрын

You should only be sanding just enough to scratch the surface. You don’t really get any dust from the way I sand it. but if it’s a popcorn ceiling, you shouldn’t be sanding it unless you know there is no asbestos in it.

@mikes427 4 жыл бұрын

That Kilted Guy DIY Home Improvement Thank you much! Your videos are great!

@maxgilbert18 2 жыл бұрын

You can wet scrape the popcorn if you're worried about the asbestos. I've always removed popcorn with water and a scraper before skim coating.

@semperfi5861 Жыл бұрын

Hello, I didn't catch what size roller nap you're using? Thanks 👍✌️🇺🇸🙂

@ThatKiltedGuyDIY Жыл бұрын

3/4-1” www.ThatKiltedGuy.com

@semperfi5861 Жыл бұрын

@@ThatKiltedGuyDIY Thank you! 🇺🇸🙂🇺🇸🙂🇺🇸🙂🇺🇸🙂🇺🇸🙂🇺🇸

@lou-nc4rc Жыл бұрын

So roller application of drywall mud is only for textured surfaces, not for flat painted surfaces? You made the statement that mud over unsanded paint would not stick and would later crack. I have read that is true of glossy paints, but that it will stick to eggshell, etc finishes.

@ThatKiltedGuyDIY Жыл бұрын

It’s best to sand any painted surface first before mudding over it. Why risk it

@carmenmendez7896 4 ай бұрын

How much time do you have to skim the mud before it dries on you? Asking because I have a pretty big living room to tackle with an ugly popcorn ceiling :(

@ThatKiltedGuyDIY 4 ай бұрын

It depends on the type of mud, how thin it is, how much humidity is in the air, how much the temperature is, how much air movement there is etc.

@carmenmendez7896 4 ай бұрын

@@ThatKiltedGuyDIY Thank you so very much! :)

@kimscornavaccosnugharborba4362 3 жыл бұрын

I'm going over an already textured surface that has been spot spackled in several places. Is there some reason I can't just do the initial coat with the roller and just leave it as is without smoothing it out? I want to leave the textured surface and just paint over it. Thanks

@ThatKiltedGuyDIY 3 жыл бұрын

Why do you even want to roll over it then? Can’t you just do the repairs and paint?

@kimscornavaccosnugharborba4362 3 жыл бұрын

@@ThatKiltedGuyDIY You can see where the seams were repaired in the past and I want to make it all match

@ThatKiltedGuyDIY 3 жыл бұрын

@@kimscornavaccosnugharborba4362 That might work, but can't say for sure without seeing it.

@kimscornavaccosnugharborba4362 3 жыл бұрын

@@ThatKiltedGuyDIY I'm gonna give it a try. thanks!

@joshmati 3 жыл бұрын

I recently removed the popcorn ceiling. Unfortunately, it left a bottom layer that's a little irregular and I'm guessing probably still has some asbestos in it. Rather than continuing to try to remove, I'm considering painting with a primer to lock in anything left, and then doing a skim coat or two to cover the irregularities. I'm sure I can cover these irregularities if I do the traditional skimcoating and put a thicker layer on first. Your method is a lot easier, though - do you think a coat or two will work, or should be applying a thicker coat with a trowel?

@ThatKiltedGuyDIY 3 жыл бұрын

Good idea to lock it down and skimcoat. I usually blade it on with a 14" knife because I can get it on thicker, usually one coat, but either works, you just may need more coats with this way.

@joshmati 3 жыл бұрын

@@ThatKiltedGuyDIY Got it, that all makes sense. Thanks!

@spencercolgan 4 жыл бұрын

Happy Easter to you. How are you feeling?

@ThatKiltedGuyDIY 4 жыл бұрын

Thanks. Still working on getting my energy back but, I’m feeling quite a bit better. They say it could take weeks to months to get fully over the virus.

@spencercolgan 4 жыл бұрын

That Kilted Guy DIY Home Improvement You did not have coronavirus, correct? Also, I’m interested in the technique you used in this video. I’m going to look in the video description for the link to that flexible applicator that you used. But I have a question for you, why did you not use the mud box as you have in the past

@ThatKiltedGuyDIY 4 жыл бұрын

Hi. I was tested and it came back negative. I did have the chills, fever near 103 & extreme body aches. Plus i threw up 15 times in one day, couldn’t eat for days & lost 12 lbs. in that week. They have no idea what it was & said it could have been a variant. As for the mud box. I don’t like skim coating with it. I would have to leave sections and come back the next day and do them. Plus it coats in an arc so it would likely be a bit wavy when done.

@jaxflfreebird Жыл бұрын

14:24 Rubber Skim Coating Blade

@oscarflores5143 3 жыл бұрын

Where I can find a good vacuum? Let me know thanks

@ThatKiltedGuyDIY 3 жыл бұрын

Depends on what you need it for?

@yuegan1939 3 жыл бұрын

Hello, the pole for the skimming blade is not from Level5? Could you share how you made it work? I'd like to use the blade but want to save some money on the pole. Thanks!

@ThatKiltedGuyDIY 3 жыл бұрын

The blade comes with a pole adapter and I just stuck a wooden extension pole in it and it wedged in nicely.

@garygrant9117 Жыл бұрын

Is there something you don't like about the ultra light

@ThatKiltedGuyDIY Жыл бұрын

It just feels too fluffy

@emmanuelparra5655 3 жыл бұрын

New here . Hope ur doing well

@ThatKiltedGuyDIY 3 жыл бұрын

Still struggling with long covid. Thanks for commenting. Guy

@TapelessDrywallFinishing 4 жыл бұрын

👍👍👍👍👍

@caribbeaninvestment5765 3 жыл бұрын

Could I skimcoat over wall paper without removing the wall Paper ?

@ThatKiltedGuyDIY 3 жыл бұрын

Highly unlikely. It’ll bubble

@bel.sat.9051 3 жыл бұрын

@yappiesinfo4112 3 жыл бұрын

Just did an old farm house removed most of the wallpaper and where we didnt had to resand and cost again

@MaMa-qh4dy 4 жыл бұрын

I guess that the angles where the ceiling meets the walls must be trolled by hand?

@ThatKiltedGuyDIY 4 жыл бұрын

That’s correct.

@petepistachio8229 3 жыл бұрын

Not true, you can take the compound on the skim blade and set it in the corner and pull away. Works well.

@timejumper8003 2 жыл бұрын

Is that a level 5 skimming blade?

@ThatKiltedGuyDIY 2 жыл бұрын

It’s this one I listed in the description below the video. 🟢 24" Metal Skim coating blade (Plus other sizes) - www.level5tools.com/products/drywall-skimming-blade-24?via=thatkiltedguy

@kellen1618 3 жыл бұрын

If you have to do multiple layers of skim coating, how long do you wait between coats, and do you have to sand between coats?

@ThatKiltedGuyDIY 3 жыл бұрын

Each coat has to dry thoroughly which is usually indicated by it turning white everywhere. And yes you have to send off the lap marks in between coats.

@kellen1618 3 жыл бұрын

@@ThatKiltedGuyDIY Thank you for your insight! I'm attempting to smooth out an old texture. Your videos have been very helpful!

@ThatKiltedGuyDIY 3 жыл бұрын

Thanks, glad I could help you out 😎. And thanks for subscribing! Www.Patreon.Com/thatkiltedguy

@louishollandjr 3 жыл бұрын

What size is drill motar..

@ThatKiltedGuyDIY 3 жыл бұрын

I just now put links to everything in the description, but here's the drill I use in the video- The Mud Mixing Drill I use (will mix all day every day, as it's super tough) amzn.to/3dUhMQZ Dewalts new 60V cordless mud mixer- amzn.to/3ktDKN5

@orozco53204 2 жыл бұрын

What size roller nap?

@ThatKiltedGuyDIY 2 жыл бұрын

18”, 3/4-1”

@bennyheesakker316 2 жыл бұрын

Damn takes forever doing it like that. I’m from Holland, I’m a professional in plastering wall’s ceilings, the old school way. Like plastering brick walls. Just buy ARDEX R1 apply that with a plastering tool.(Marsheltown). Max 30 min and that ceiling is smooth like hell. Also no sanding!! Just saying. If you make money like that than you must have $ 400, min to Live on it.

@timwoten256 3 жыл бұрын

My arms would be falling off about now!

@ThatKiltedGuyDIY 3 жыл бұрын

It’s hard for sure

@louishollandjr 3 жыл бұрын

You guys like Flat Boxes.?

@ThatKiltedGuyDIY 3 жыл бұрын

I don't like the idea of skimming with them. Seems it would be to hard on the blades, plus having to make multiple passes, each with humps, then trying to sand it flat. I prefer to do it once, and get it flat the first time with far less sanding. That's my take.

@stlingst7537 2 жыл бұрын

Long talk kick off.

@MrCervasio1 3 жыл бұрын

I'm pretty sure that's not OSHA approved footwear

@jaxflfreebird Жыл бұрын

The man on the shirt has black or brown hair. It can't be this guy. He has white to gray hair.

@louishollandjr 3 жыл бұрын

Where him shoes lol

@ThatKiltedGuyDIY 3 жыл бұрын

I worked so fast I ran right out of them..... I work barefoot as I'm on a carpeted floor. MUCH more comfortable. Shoes are over rated.

@bel.sat.9051 3 жыл бұрын

@@ThatKiltedGuyDIY ok? Stop smoking pot?

@ThatKiltedGuyDIY 3 жыл бұрын

???

@alfredonieto5910 3 жыл бұрын

Where are your shoes at ????osha gonna get you .

@ThatKiltedGuyDIY 3 жыл бұрын

Working on a customers home, with carpeted floors. No osha to deal with.

@pound6599 3 жыл бұрын

I did that the other day. Had I been barefoot, I would have known....

@bel.sat.9051 3 жыл бұрын

Wait . a skirt? No shoes ... ? WTF . is going on what am I missing . are you from TEXAS?

@ThatKiltedGuyDIY 3 жыл бұрын

No, I’m a free American who served seven years in the military to protect the rights and freedoms of everybody in this country to live their life as they want. And by the way, it’s a kilt, not a skirt, not that it matters a bit to me.

@ThePerfectSeason1972 3 жыл бұрын

I thought the no shoes part was pretty cool. If one can do with no shoes, well, they are a real pro! He could probably do it with his eyes shut.

@ThatKiltedGuyDIY 3 жыл бұрын

@@ThePerfectSeason1972 pretty much