Perfect tutorial. No hot dogging around and posing, just straight forward and easy to follow. Thank you.

I’m not a plumber but you definitely took the “rocket” out of soldering a copper joints and turned it into science. Thank you for sharing your knowledge.

Best how to video I've seen in a long time. No bullshit "hey this is what a pipe is" nonsense you just taught me how to fit pipes together. Thank you!

I probably owe you a delicious breakfast, man, because you really saved my bacon today! My wife Connie has a thing about filtered water, so I bought a house filter for our new place and figured I’d handle the install myself. I’d never messed with copper pipes before, but your tutorial gave me the courage to try something new. Everything went smoothly except for the last two joints; there was a trickle of water in the line that I had to deal with. Thanks for your expert guidance. If you’re ever in Richmond, VA, breakfast is on me.

I've never soldering copper pipes before, now I know where to start, thanks for sharing.

This is probably one of the best videos of how to properly solder gj mate

This is amazingly helpful! You have the rare combination of top notch skill and the ability to explain clearly. Thank you. Great video.

I did it years ago for one project but really didn't remember. Have a new plumbing project to do now. Thanks, this is exactly what I needed.

Can't get it better then this very clear on how to solder I feel now I can tackle any soldering pipe projects👍

It's well explanatory, I'm a domestic plumber but never got such industrial experience, thank u Sir for ur good we'll job🙋

That's how you make a video 👍 Straight to to the point no bs no distraction from a thousand other things. Thanks man !

new to plumbing, I really enjoyed your video; i am going to pintch an existing small pipe, and solder it the way you do

Thank you for a fantastic video, all the detail you need in a compact, well paced video. Thank you!

Excellent lesson! Especially explaining which proper tools need to be used. I never knew there was a deburring little tool.

Followed his advice and it worked!!! You rock. Keep sharing vids with us.

Great, informative, easy to follow video. Great job!

Award winning tutorial. Much appreciated !!!

Haha , man , once I spent hours trying to soldering a bath leaking copper pipe , you made it look just like a breeze, knowledge is key 😂. Thx.

Just learned this process, I was applying the solder while the torch was heating. Turning it off is definitely better, glad I came across this! Thanks a ton

This is great. I am a first time copper pipe user and I nailed it perfectly. Great way to share your knowledge. Thanks

worked like a charm, thanks for getting to the point and making it simple!! 👍 Mine was a tad sloppy but NO LEAKS!!

Great video, I’ve been in the trades for 5 years now and I always find myself putting the press fittings aside and soldering on projects that people can see like boiler work, it always looks cleaner. Plus it’s a great skill to have

Thanks alot for showing me how to solder copper and taking my fears away. I appreciate you alot.

You made that looks so smooth and easy. Thank you!

Excellent video with clear explanation of each step necessary for a successful solder joint...keep em' comin'!!

About to try this for the first time, as a repair. Thank you for doing this.

Big thanks for the tips buddy because I got a situation with my water and will help me with that thanks again buddy 👍🏾

Thank you for opening my mind I was totally blank about soldering skills, now you have made me understand the all concept through your well explanation thank you sir!

I welded Cooper a couple of times but I like watching videos to learn more thanks for sharing my man

Thanks Jumperman ! My soldered line was perfect ! A great video .

In school for HVACR never soldered before and this is our next hands on it’s in my book but in a visual/ hands on learner so this definitely helps thanks for sharing

You're a life saver man! Ty4 educating us on the proper way!

Great Video!! I like the way you went through a checklist of tools and steps.

Thank you. I really love to watch this kind of video clip. Beautifully "executed"!

Thank you for the video! Today I actually had to try my best to help a customer with soldering and fixing pipe and I explained to them that I knew nothing about torches and welding but I try my best Google and KZfaq to see if I can help find what they was looking for I don't think I was much help because I've never done this type of work myself I'm grateful for you to show a beginning video and explain what to do and how to do it so that is give me some what of knowledge of what I need to tell my customers when they asked me about soldering and welding. Again I say thank you!

Thank for showing how to sloder copper pipe you explain that very well and straight to the point to understand the job

Directives were right to the point without any the bs. Ty. I'll be a pro after watching this video.

so helpful!! my mechanics teacher makes us jump right into things without teaching us so i really appreciate this!!

Nice, concise video. Always hated the deburring tool on some pipe cutters. Never thought about using the machinist's type, one of which I already had.

Thanks for providing a clear, informative take on this practice.

Thank You! You explained it so well and thoroughly!

Simple, straightforward and concise.

Thank you for soldering. Perfect timing for the soldiering. See soon.

Thank you! I've never seen it done that neatly before!

Thanks for clearly explaning that Heat Nd suck in! Nobody has ever told that important thing before in any videos 😊

Thanks for the tips. I will be trying it this weekend and with your great video I’m sure I will be successful. Keep up the great informative videos.

Thanks for the video. Just began an apprenticeship and am very excited to get started 🔥

I just recently started at a vocational highschool, and one of the shops I will be visiting is plumbing. I had no idea what soldering was until he was explaining what we would be doing. I just wanted a head start and this was great explaining and I’m less scared.

Top notch tutorial, thank you!

Exactly what I wanted to know and very enjoyable to watch and listen.

Thanks for the video and the tips. Off to the basement to relocate and put in a new water heater. Great video!

EXCELLENT VIDEO! I'm replacing the shower valves in both my bathrooms and this will save me hundreds 💰 , thanks again!

I love it when it’s straight to the point.

Excellent job !!! Well explained and very neatly done. 👍

Beautiful indeed! Very clean and precise solder. Thank you for this turorial :)

Great video. Well explained. I have been wanting to learn basic soldering. Thank you.

WOW! I was doing it incorrectly back in the days! Thanks a lot Jumper Man!

Never soldered before, explained it to perfection,

Thanks for making me feel more confident about what I'm going to try, thanks to this vid, I think I got it!

Very helpful and straight forward.

What a great job and great video, I will be giving this ago now as I have radiates to fit all round this will save me lots of money.

Awesome instructional video! The close ups are very helpful as well as the demo. Thank you for your help!

Thank you much. I really enjoyed that. I am very interested in plumbing and have thought about becoming a pumber. God bless.

Good stuff....I think you know how much we appreciate this....all the best dude

Thanks a lot brother 4 the video atleast I've learned something today. God bless you all the way from Nairobi, Kenya.

Hello from Houston!!! Trying this DIY tomorrow, wish me luck! Thanks for the video.

Very helpful Very well made job Thank you!

School Flashback. I miss college. The basics here should never be forgotten. Don't forget, Padawans; you will rarely have the ability to mimic the lab when you're on the field.

Excellent. Thanks for taking the time to post.

I like your videos. Short and very well explained. Keep making these great educational videos. Congratulations!

Thank you! Now I can try the maintenance test again. Maybe I’ll get the job this time. 😜

Thank you! Keep the videos coming!

Excellent video! Thank you. 5 ⭐️

Thank you so much, great clear tutorial and easy to understand.

very well done and equally educational. Thank you, I feel a bit more confidant to go and do a water line repair job in my home now.

Excellent video. Definitely will have a go now. Thank you.

Nice and clear - thanks!

Excellent upload with clear vocals and excellent visuals..ill be doing this soon..thanks

Thank you. I feel confident to do this now.

Very helpful video 👍 for New technician and others. Thank you

just started a mechanical job this was a great explanation of how to learn how to . thx

Nice job. Great step by step tutorial.

Brilliant and professional. Thank you

Looks good. Thanks, you helped me with my project.

Another awesome video my friend! Well done.

Dude, I've seen some videos and your video explains this very thoroughly, step by step, I wish You were One of My Teacgers in Highschool... You explained Type of Gas, Soder, where to heat because heat rises ect...thank you...

This told me exactly what I needed to know. Thanks man!

I’m going to try this tomorrow. Thanks bud

Extremely Helpful. Thanks 🙏🏼

This is a superb video, thank you!

In the HVAC field, so i do aloottt more brazing than i do soft soldering. funny cause i always watched plumbers on job sites doing this, and would just spark up conversation with them, and id be talking about how hard soft soldering is and they laugh and ask how tf we braze so easily. After being in the construction side of HVAC for 3 years and running alot of copper drains for freezers and water lines for ice machines i finally got soldering down pretty well.

Thanks Dude. I have some plumbing to do. This is a great refresher. MAP Gas is new to me. I'll get some tomorrow.

Thank you. Excellent tutorial

As plumber you finish the job smoothly buddy

So nice to see someone spin the pipe vs the tool

Very helpful, I’m ready to give this a go.

Great video. Nice explanation of the process

Appreciate this video so much! Thank you

You should be a shop teacher. Well done!

Excellent video thanks for sharing!!