HOW-TO Solder your LEDs
Рет қаралды 28,140
Күн бұрынUPDATE!!! This video is several years old now and we have uploaded a new and improved "HOW-TO Solder Your LEDs" found here: • How-To Solder Your RGB...
It gives a much more in-depth look at the proper technique to make sure your lights last for years to come!
For more information and how-to videos please visit our website!
www.boogeylights.com/
=================================================================================
And don't forget to give us a follow!
Facebook: / boogeylights
Instagram: / boogeylights
Twitter: boogeylights?lang=en
Light em up and travel safe!
@masterglitch0 2 жыл бұрын
Would it be possible to solder an LED strip to an Amazon echo so that when you activate her it turns on the LED strip?
@seanparnelleverett 3 жыл бұрын
Cool video. We got led lights . Recessed retro spots on the kitchen. Hooked up to the mains. One a da lights went. Wee got order a new " panel ". I took one a da light units apart. It's basically a connection wire soldered to a led strip. Can I rip off the old strip and solder a new strip to it. It seems crazy I got to order and pay 20€ for a new fixture. Thanks and Thumbs Up
@jacks.8791 3 жыл бұрын
How do you know what size heat shrink to use?
@BoogeyLightsLEDs 3 жыл бұрын
We'll typically double heat shrink. One smaller piece at 1/4" diameter and one larger piece with 1/2" diameter: www.boogeylights.com/heat-shrink-tubing/
@uninstalledsoftwares6266 2 жыл бұрын
Is it possible to light other colours then red blue and green?
@BoogeyLightsLEDs 2 жыл бұрын
yes, we make single-color LEDs as well as the ability to mix red, green and blue using a controller module to produce multi-color. Give our technical support a call: 800 847 1359 (M-F 9am-5pm ET) or text: +1 859 955 8155
@frigglediggle2 Жыл бұрын
Is rosin core not enough flux? Is additional flux necassary?
@BoogeyLightsLEDs Жыл бұрын
Rosin core is enough flux, in our opinion.
@frigglediggle2 Жыл бұрын
@@BoogeyLightsLEDs cool, thank you
@BoogeyLightsLEDs Жыл бұрын
@@frigglediggle2 no problem - appreciate the interest!
@alpachino468 Жыл бұрын
Honestly, some of the questions asked in the comments makes you wonder if that person should even be allowed any where near a soldering iron...
@thomasmaughan4798 2 жыл бұрын
*The bigger the blob, the better the job!* (not really)
SALEM EPISODES
Рет қаралды 563 М.
Studjo Infinity
Рет қаралды 212 М.
Chris Maher
Рет қаралды 198 М.
ПМ АВТО ГРУПП
Рет қаралды 11 МЛН
Контент
Рет қаралды 9 МЛН
Canal Araucity
Рет қаралды 8 МЛН