*TIMESTAMPS* Cube Shape: 2:19 Corner Orientation 8:42 Edge Orientation: 10:59 Corner Permutation: 14:40 Edge Permutation: 17:18 Parity: 21:06 Middle Layer: 23:19 Like so others can see ^-^

There is only 1 way around the parity... Scramble it again and start over and pray you don't get parity again.

If you messed up during a solve on this cube, you literally have to go back to square 1 ;)

The best way to learn parity is to set it as your phone password, then eventually you'll have accidentally memorised it!! :)

I had the parity with the long algorithm, and when you first said it was long, I laughed and thought you were joking, and then 5 secs later I realized you were serious. In the middle of the algorithm I messed up, and now I have to start over. I want to cry now...

Legend has it, if you are almost 2 years late, there will be original comments too bad legends are just legends

I was thinking to myself about how the square-1 usually popped when you tried to do corner cutting... i got hit in the forehead by a piece 5 seconds after that.

Is it me or does having all the edges together look like the Millennium Falcon?

This guy need 100K like cuz he is Soo good at explaining

Someone: How's your luck? Me: Got parity on the first ever solve

2:20 Cube shape (case 3:22 - 3:47 - 4:32 - 4:51 - 5:14 - 6:00 - 6:50 & 8:56) 8:45 Corner Orientation 11:04 Edge Orientation (case 11:36 - 11:51 - 12:28 - 13:20 - 13:57 - 14:21) 14:40 Corner Permutation 17:20 Edge Permutation 21:18 & 22:16 Parity

alot of people have been comparing you to do cubes because you go fast, however with that aside I really like the fact you went into more detail. You and DG did an amazing job.

𝗦𝘁𝗲𝗽 𝟭: 𝗖𝘂𝗯𝗲 𝗦𝗵𝗮𝗽𝗲: 2:19 - / -2,-4 / -1,-2 / -3, -3 / 𝗦𝘁𝗲𝗽 𝟮: 𝗖𝗼𝗿𝗻𝗲𝗿 𝗢𝗿𝗶𝗲𝗻𝘁𝗮𝘁𝗶𝗼𝗻: 8:42 - (0, -4) / (0, 3) / (0, 1) 𝗦𝘁𝗲𝗽 𝟯:𝗘𝗱𝗴𝗲 𝗢𝗿𝗶𝗲𝗻𝘁𝗮𝘁𝗶𝗼𝗻: 10:59- 1,0 / -1,-1 / or / 3,0 / -3,-3 / 0,3 / 𝑪𝒂𝒔𝒆 1- 11:35 - 𝑪𝒂𝒔𝒆 2- 11:50 - 𝑪𝒂𝒔𝒆 3- 12:28- 𝑪𝒂𝒔𝒆 4- 13:21 𝑪𝒂𝒔𝒆 5- 13:56 𝑪𝒂𝒔𝒆 6- 14:22 𝗦𝘁𝗲𝗽 𝟰- 𝗖𝗼𝗿𝗻𝗲𝗿 𝗣𝗲𝗿𝗺𝘂𝘁𝗮𝘁𝗶𝗼𝗻: 14:40- / 0,-3 / 0,3 / 0,-3 / 0,3 𝑭𝒊𝒓𝒔𝒕 𝑳𝒂𝒚𝒆𝒓: 𝑪𝒂𝒔𝒆 1- 15:20 - 𝑪𝒂𝒔𝒆 2: 15:41 𝑪𝒂𝒔𝒆 3: 16:48 𝑺𝒆𝒄𝒐𝒏𝒅 𝑳𝒂𝒚𝒆𝒓 : 𝑪𝒂𝒔𝒆 1- 15:43 𝑪𝒂𝒔𝒆 2: 16:29 𝑪𝒂𝒔𝒆 3- 17:02 𝗦𝘁𝗲𝗽 𝟱- 𝗘𝗱𝗴𝗲 𝗣𝗲𝗿𝗺𝘂𝘁𝗮𝘁𝗶𝗼𝗻: 17:18 - / 0,-3 / 0,3 / 0,-3 / 0,3 𝑪𝒂𝒔𝒆 1: 17:56 - 𝑪𝒂𝒔𝒆 2: 18:47 𝑪𝒂𝒔𝒆 3: 19:08 𝑪𝒂𝒔𝒆 4: 19:41 𝑪𝒂𝒔𝒆 5: 20:05 𝑪𝒂𝒔𝒆 6: 20:47 𝗦𝘁𝗲𝗽 𝟲- 𝗣𝗮𝗿𝗶𝘁𝘆: 21:06 𝑪𝒂𝒔𝒆 1: 21:38 / 0,-3 / 0,3 / 0,-3 / 0,3 𝑪𝒂𝒔𝒆 2: 21:54 / -3,0 / 0,3 / 0,-3 / 0,3 / 2,0 / 0,2 / -2,0 / 4,0 / 0,-2 / 0,2 / -1,4 / 0,-3 / 𝗦𝘁𝗲𝗽 𝟳- 𝗠𝗶𝗱𝗱𝗹𝗲 𝗟𝗮𝘆𝗲𝗿: 23:19

that parity algorithm killed me

I was so happy that I made it all the way to the parity algorithm...

Thank you so much. That really helped. I have only solved it twice by myself and I wrote everything down now I don’t have to even look at the paper. I have always came to you for your tutorials I now have 48 cubes and can solve 44 of them. You even showed me how to solve 2 by 2 through 5 by 5 and now I am sub 40 seconds of 3x3. That isn’t that fast but I still use beginners method. I am thinking about watching your cfop video too! You are awesome. Keep doing what you do. And thanks to whoever read all of this.

Video: Is posted 4 years ago Most of the comments: Are posted 2 years ago Me: Learns to solve Square-1 now Hotel: Trivago

Orienting the corners seem like making a center on a 4x4. It might just be me but it reminds me of it.

I have a suggestion for the last parity, If you get , like adjacent peices are swaped in both layers then instead of doing layer by layer you can do this algorithm by keeping both of them , one on right and one on back and do -2,0/3,0/-1,-1/-2,1/ And you are done Comment below if you like 😀and tell how was it 👍

Me at first: ok this is easy Me and parity: *mixes it up and prays for no parity*

The worst thing when doing parity: You forgot whether you have slashed it or not

Who else got double parity I am so unlucky:C

Lmao I was supposed to do the parity but I thought I was still at edge permutation.

This is the best Square 1 titorial I have seen , before I hated square 1 but now I am loving it and taking it as a challange ...

Learning this puzzle is literally the death of me. It's so fun to play with and annoying at the same, yet I can't seem to put it down.

I fear no man..... But that thing *Parity Algorithm It scares me...

l had only one problem. I dont have a square 1 😂

If I had $10 for every time he said “That” I would be rich 😂

The parity alg isn't so bad, especially considering the first half of it is an alg you already use in previous parts. It's conparable to the 4x4 OLL parity alg or the 5x5 middle edge flip alg.

the only way to avoid the long alg is to not do square - 1 lol

Thanks a lot! This is the best and most clear tutorial i've ever seen for the S1, i learned how to solve with it! I hate this puzzle so much lol

You do the best cubing tutorials ever man

to solve parity without the pairty alg, turn it into a scallop scallop and then do the star shift then solve the rest.

WHAT IS THE INTRO?!?!? what happened to “hy guy myny legoboy3 here”

me: I can solve the cube Parity: think again

I honestly thought that you were laying down the sarcasm pretty thick with the parity algorithm. Then I saw it.

Thanks z3! I just got a square1 yesterday and this tutorial really helped. You can also solve parity by undoing cube shape and slicing the 4s left if the slice.

If you play the speed at 0.5X, it sounds like he is drunk. Really.

The square 1 is basically the final step in becoming a cuber. I'm terrified of this thing. I can do 2x2, 3x3, 4x4, pyraminx, kilominx, and megaminx. But this. This thing scares me.

i swear this video is the easiest and the clearest way to solve this cube! i've watched many videos but still dont get it, but this one totally helps me! thank you so much!!!!

This is the best tutorial on KZfaq thanks!

Nice tutorial! DIdn't get it at first but I managed to solve it in the end. :D Thanks

Thank you so much Alex, I felt embarrassed to be able to solve a 15x15 in less than 1 hour but not able to solve a square-1 so i'm glad you made this tutorial. (even tho it was 7 years ago)

TYSM! I finally solved the square-1 which has been sitting in my bucket of cubes unsolved for the past 3 months.

I screwed up on the super long algorithm at the end and had to restart

Z3 Cubing’s tutorials are easy to follow along, but for me I have a very hard time UNDERSTANDING them.

Very very very good tutorial you got there, Lego :) Solved my square-1 after watching just once and learned a lot from it. Thanks :)

"So ultimately what you want to do on this step is to either get all four edge pieces solved or just two of them that are flipped, *we'll fix that later* " Me: *Sweats profusely*

wow thank you so much for making this. i was using a tutorial that had huge like 13 step algs just to swap two peices and this is much easier to remember

Thanks a lot!! I solved it for the first time,because of you! Keep on going, with the great work!

This tutorial is already beter then the other one I was watching because you included all the edge cases I did edge in 3 min the last tutorial took me 2 hours to do edge and I couldn’t even do edge

It was just lying around my house, and then after around two days, I was able to solve it. I am never going to scramble this puzzle again.

This was amazing! I have a new found love for Square-1! I always thought that it was a pretty bad puzzle, but now I quite like it! Thanks a ton!

22:01 this is the start for the parity alg

19:09 you do like H perm in 3*3. It goes: .(1,0)/(-1,-1)/(-3,0)(1,0)/(-1,-1)/(-6,0)(1,0)/(-1,-1)/(-3,0)(1,0)/(-1,-1)/ In 3*3 will be: M2 U' M2 U2 M2 U' M2

Very clear instructions! Thanks a lot! You are my favorite youtuber!

When you find out the reason you can't solve your square one is because you are using the wrong algs

I watched this damn tutorial 10 times and I still can’t get it

I failed parity so many times that I am like super good at cube shape now. Legend has it I am still trying to memorize parity

Timestamps because I can't find any already here: 2:20 cube shape 8:43 corner orientation 11:00 edge orientation 14:41 corner permutation 17:19 edge permutation 21:09 parity

The algorthim with /(0,-3)/(0,3)/(0,-3)/(0,-3)/ is the WORST. Z3: just do the algorithm once..... then do it once again......and again......if you have THIS, do that algorithm once again and again until you get it.... if you don’t, jut do it once again................. I also messed up my cube twice because of that

Please make an updated tutorial. BTW thx for the vid tho. Just got a Square-1, immediately mixed it up and learned how to solve it (kinda).

he litterally took other tutorials and just made them easier to understand, and faster to do. thx alot

More like who in 2024 😅

When i saw thia video, it had 333 likes and 33 dislikes

10/10 i had my square-1 for so long, great tutorial

Square 1 looks and sounds very intimidating, I hope one day when i get a square 1 puzzle, I can come back to this video to try and learn how to solve it.

Legend has it if your 5 months late he might reply

TIMESTAMPS Cube Shape: 2:19 Corner Orientation 8:42 Edge Orientation: 10:59 Corner Permutation: 14:40 Edge Permutation: 17:18 Parity: 21:06 Middle Layer: 23:19 Like so others can see ^-^ 0: (:

Me with parity: Beginning: Oh this is easy I’ll memorize this. Middle: Oh that’s a bit harder End: Impossible

I managed to learn this including parity in one day with this video. Thanks Z3

Can someone please tell me how I just did 5 square-1 solves by myself ( just got my square-1 yesterday) and did not get the parity algorithm. Someone tell me.

your algorithms work!

When I messed up the parody algorithm I thought "Man, I guess it's pack to square on-" And questioned my existence

Good job with this video! Definitely the best on KZfaq as of now... lol the Square-1 can be really confusing ;)

For Step 1 you should try to get 2 groups of 3 corners, merge them, and then group the remaining 2 corners.

U did better than dg cubes

Nice tutorial dude. I really appreciate it how we have to memorize less Algorithms since you reused next of them

That puzzle is so fucking diabolic took me almost 3 hours to solve following the video instructions. Never gonna scramble it again

22:17 holy mother of god. Holy shit, that's a big ass algorithm

You really need to explain how the layers turn what way in the algorithms better and go over all of the cases thoroughly and not just fly through them

Hey Legoboyz, I love your videos, they're funny entertaining and helpful, this tutorial was awesome, you deserve at least 100,000 subscribers, keep up the good work.

Thank you so much! I learned from this tutorial ages ago and it's now my main event! It took forever to learn but it was worth it! Thx!

This Just Looks Like A Headache In A Cube... And The parity Is Just The Worst.

Try to solve the mirror cube one handed please

thank you so much i didn't under stand at first after your tutorial i did my first sq-1

Thanks a lot for the tutorial, it helps a lot. You can explain it very detailed which makes this complicated puzzle for simple to solve.

Do how to solve the windmill cube

I messed up the algorithms. It still worked? Edit: I messed up

There is a simpler algorithm for edge orientation where u swap one edge at a time so what u do is for the edge that ur going to orientate keep it on the right side perpendicularly with the one on the bottom and do this algorithm (1,0)/(3,0)/(3,0)(-1,-1)/(-2,1)/(-3,0)/

thanks man, finally I solve my square 1 today in 1 hour.

Oh. My. Gosh. I found a way to not have parity. Don't solve Square-1.

legoboyz3 did a good job on tutorial I learn pyraminx and sq1 from him

I knew how to solve it before, but when I forgot and picked it up again, I was legitimately just playing around using logics from other puzzles to figure it out, just by playing, no algorithms.

Sooo awesome .this guy made me solve my first square 1.

Please go a little slow. The pity beginners(like me) cant catch up with you. Too fast and also you are wasting time. The video is too long. Hopefully you resolve this. I am vexed bro. I am unable to follow you. Please keep displaying the algorithms whenever needed.

everybody: pArItY iS sO hArD just learn csp

THANK YOU SO MUCH!! yesterday I scrambled the cube, and I couldn't even solve 6 edges. this morning I watched your tutorial and after two hours of failing and messing up I solved it! :D

when you are doing the tutorials make sure everything is clear so i recoment slowing down on the algorithms so people can understand easier and explain what the moves do.

I messed up so much :p