How to Specify Entry & Exit Points in Mastercam Contour Toolpath
Рет қаралды 12,660
3 жыл бұрынTo learn more about Mastercam visit us online at mlc-cad.com/mastercam/
When using a Contour toolpath it may be necessary to get a more specific entry and exit behavior from a user-defined point rather than a plunge or a traditional lead-in/lead-out. Our expert Sherman Snyder walks you through how to define and utilize a start point for multiple chains in a contour toolpath. With a defined entry and exit point the toolpath cuts exactly as intended for this counterbore. @mastercam #CNC #Toolpath
@vequedicui 2 жыл бұрын
Thank you MLC, I learned something new today
@MLCCADSystems 2 жыл бұрын
Glad to hear it!
@erferrera8505 2 жыл бұрын
excellent video. thanks
@MLCCADSystems 2 жыл бұрын
Glad you liked it!
@erferrera8505 2 жыл бұрын
can i use center entry point when i m using "RAMP toolpath" ? thanks
@MLCCADSystems 2 жыл бұрын
When using the ramp option in contour, Mastercam will grey out the start point option making it unavailable.
@md8744 2 жыл бұрын
What is the hhhhh you tried to explain Sir. You are not ability to teach people than gentleman in Seattle though. When you try to show how to people you must try to be yourself like beginners
@MLCCADSystems 2 жыл бұрын
This topic is not a beginner topic and will require knowledge and understanding of entity selection and toolpath creation before you can follow along. If you are just learning how to make toolpaths I recommend one of the Getting Started Mill videos.
TheSoul Music Jam
Рет қаралды 27 МЛН
CAM Force CNC Academey
Рет қаралды 5 М.
Virender Singh Bhati
Рет қаралды 5 М.
Pochinka_blog
Рет қаралды 3,9 МЛН
Техно Гарри
Рет қаралды 27 М.
lev89k
Рет қаралды 1,3 МЛН