How to Spray Paint Wheels Gloss Black

No video

How to Spray Paint Wheels Gloss Black

Рет қаралды 221,409

Күн бұрын

I go through the entire process of how to spray paint wheels gloss black I bought these wheels on Ebay for a steal for the Polo project and with a little bit of effort I will turn these wheels from a dull silver finish to a stealth glossy finish for much less than it would cost if you got the wheels refurbished by someone else I hope this video is helpful
Items used in video:
1- Masking tape - ebay.us/o8cm6F
1 - Tack Rags - ebay.us/F0RxGn
1- 3M Facemask - ebay.us/4EHZGm
2 - Proxl 2K Clear - ebay.us/Lz1EzI
2 - Etch Primer Grey - ebay.us/4YF8D0
2 - Gloss Black Aerosol Can - ebay.us/JSf4z6
1 - Red Scotch Bright - ebay.us/KeivOr
1 - 400 & 800 Grit Sandpaper Wet and Dry - ebay.us/nvpNW7
1- Panel Wipe - ebay.us/OG3qpL
1 - BOX of Gloves - ebay.us/vcMjnM
1 Meguiars Ultimate Compound - ebay.us/7FrpIU
1 - Panel Wipe - ebay.us/UJfurk
1- Plastic Bin Bags
1- Gazebo - ebay.us/s7JSeB
CAMERA GEAR USED:
1- My camera - ebay.us/G8d7K5
1- SD card - ebay.us/5jCN89
1-Vlogging tripod - ebay.us/cmvG4c
Social Media: / the_journeyyx
MERCH STORE:
journeytomydre...
Music Credits:
Epidemic Sound
Disclaimer:
Links included in this description are affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel.
Due to factors out of the control of The_Journey, I cannot guarantee unauthorised modifications of this information, or improper use of this information. The_Journey takes no liability for any property or personal damage that may arise from doing a repair on your car after watching any of my videos. Due to factors beyond the control of The_journey the information contained in this video will not create any express or implied warranty or guarantee of any particular result. any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not The_journey

Пікірлер: 399

@The_journeyy 2 жыл бұрын

*I FORGOT TO SHOW THE LAST COAT PUT ON THREE COATS OF CLEARCOAT FOR THE BEST RESULTS!!* 👌

@jerryconcar4800 2 жыл бұрын

How many can did you use in total for the Primer, Paint, and Gloss coz i could guess how much it would Cost Myself

@The_journeyy 2 жыл бұрын

I'm not sure exactly as its been a long time since I did this job if you've a look at the description I've got all the items and quantities used in that 😁

@oliverredman Жыл бұрын

Question though Iv got no issues spraying a set of rims but how to get them properly dry so they don't end up soft

@The_journeyy Жыл бұрын

You don't spray in very humid areas and you follow the instructions for allowing them to dry per coat as suggested by your cans instructions

@ap3085 10 күн бұрын

Can you list the products used.

@thom8577 2 жыл бұрын

Beautiful job. Nice to see someone take the time to get the back of the wheels, too.

@The_journeyy 2 жыл бұрын

It takes a bit longer but the results are amazing, thanks for the nice words Thom hope your well

@392hendo Жыл бұрын

Man I’ve painted plenty of wheels and tried different techniques but after watching this video I definitely did the set I just painted the best. It was my first time sanding the primer and using 2k clear gloss and I can’t believe how good they came out! Thank you for the tips!

@The_journeyy Жыл бұрын

That is such a nice compliment bro I'm glad this video was of some use I remember when I painted my current wheels on my VW its crazy to think how long that's been and how wheels can make or break the look of a car 😀

@sutton590 Жыл бұрын

I just did mine. And the paint scratched off. What do u think I did wrong?

@The_journeyy Жыл бұрын

1) Normal things that cause this are skipping the prep of sanding the wheel or 2) the most common using cheap 1k clearcoat which isn't as durable as the 2k bodyshops use and the one I used in this video proxl or 3) not putting three coats of clearcoat did you do any of those?

@sutton590 Жыл бұрын

@THE_JOURNEY I did sand. I used 2k clear coat. I think I may have only did 2 coats. 😪🤦🏾‍♀️ How are ur rims holding up? I may have to get mine done professionally.

@The_journeyy Жыл бұрын

Sand well, 3 coats of primer, sand lightly with 800 grit to flatten the primer, 3 coats of paint and then 3 coats of 2k clear. My wheels are holding up well not sure how long it's been since I installed them 😊 the first time painting can be a bit hit and miss I had similar issues when I painted my first panel and used 1k clearcoat but now if I paint a panel even with cans you'll find it hard to guess whether it was a can or spray gun job it's all a practice thing and once you've done it once as long as you follow the steps and you use good products for example like proxl 2k you'll get amazing results the amount of people that have reached out or sent me pictures of their wheels it's fascinating

@markfeuz4699 Жыл бұрын

No nonsense straight to the point tutorial. Great video and appreciated. Thanks

@The_journeyy Жыл бұрын

Thanks for the kind words Mark :)

@BB-gm4xs 2 жыл бұрын

Watched loads of these videos, this one is by far the best step by step process for a DIY'er doing it at home!

@The_journeyy 2 жыл бұрын

Hi B B thank you that's what I was going for the first version wasn't as clear so tried to make sure this one was

@iQuatro Жыл бұрын

dude thank you for this video! I want black wheels for my ILX and my dad suggested we spray paint the metallic ones I have now. Had no idea they could turn out this nice! Super excited now. Thanks again.

@The_journeyy Жыл бұрын

Thanks for watching the video don't forget to put on three coats of 2k clear for bodyshop results 😊

@Zorfue 8 күн бұрын

Great video, very clean and professional

@The_journeyy 7 күн бұрын

Thank you 🙏

@RalphRees-ll1my 9 күн бұрын

Looks stunning!

@The_journeyy 8 күн бұрын

Thank you

@Crimsonhaha 2 жыл бұрын

I never sanded the primed stage. It makes sense thanks. I always wondered why the gloss black looked matt 🤔 😄 🤣

@The_journeyy 2 жыл бұрын

I remember getting exactly the same thing when I done my first panel numerous times, ended up reaching out to a bodyshop just to find out why I couldn't get my gloss 😲🤣

@brianblackburn2516 11 ай бұрын

Yo Dude, RESPECT patience and care and superb result for simple planning preparation and diligence. Thank you. About to do 16" VW Crafter Van conversion and need the look before the new tyres are worn out so this is s great Stealth Bomber look for a fraction of the price........thank you for your presentation and hard work. Brian & Anna. x

@The_journeyy 11 ай бұрын

Hello Brian thank you for the kind feedback I know the Van is going to look amazing for the best results don't forget to throw on three coats of 2K clear ❤️

@meroxbeograd 5 ай бұрын

Wow! This looks smooth and clean! Great work and finish my G!

@The_journeyy 5 ай бұрын

Thanks bro 👏

@darrelduke Ай бұрын

rims look amazing! great tutorial.

@The_journeyy Ай бұрын

Thank you 🙏

@davidlundrigan1435 3 жыл бұрын

Nice Job.....As for the comment regarding sanding before Clear coat, its a myth and is a wasted step. The best way to prevent Lacquer peel is to Clear coat within 30 minutes of of your last coat of colour, especially if your paint has laid well. The tacky paint will help the adhesion process and prevent peel.

@The_journeyy 3 жыл бұрын

Hi David thanks for the feedback, Agreed on the sanding before clear coat. I usually wait one hour before throwing on the clear do you think that's too long?

@davidlundrigan1435 3 жыл бұрын

@@The_journeyy Yes, you need to clear coat whist the colour is still tacky to touch. Personally I SET A 20 minute timer after laying the colour and then I clear coat.

@The_journeyy 3 жыл бұрын

I will keep that in mind thanks for the advice

@mandoosuiii8072 Жыл бұрын

@@davidlundrigan1435 how many times did you clear coat? do i set a 30 minute timer between two clear coats ?

@SuperSlimshady1 9 ай бұрын

@@davidlundrigan1435how many clear coats did u do? Like a cleae coat after every black color coat?

@astonishdeezy 2 жыл бұрын

Looks so good ! I’m looking at picking up some old alloys that need a little refurb hope they come out to a similar standard 🔥

@The_journeyy 2 жыл бұрын

Thank you bro it's definitely worth it I've seen so many people who have done theirs as well that have sent me pictures showing their results mad 🔥

@im.weasel 2 жыл бұрын

Looks so good man! I am going to do this for my wheels!

@The_journeyy 2 жыл бұрын

One of the best modifications to the car appearance 👌

@yvesstdre443 3 ай бұрын

Lovely tutorial and great finish to the job. Not sure if it's a branding issue, but it would have been nice to show all the spray materials you used.

@The_journeyy 3 ай бұрын

Thanks for the lovely feedback all the materials used are in the description of the video

@jakkbatt4711 3 жыл бұрын

looks awesome 🤘 just got some used alloys with a really bad rookie paint job🤣☠ for dirt cheap😃 cant wait to sand em and do it right💪

@The_journeyy 3 жыл бұрын

Thank you Jakk Batt, crazy to think how such a small thing can make the car look so cool, nothing better than getting some wheels really cheap and doing a little refurb have a good time 😀

@Mutatedchromosomes333 2 жыл бұрын

@@The_journeyy what did you use the scotch brite to do? I don’t see it used in the video

@The_journeyy 2 жыл бұрын

Just to further scuff the wheels in those tight spots my 400 grit sandpaper might not have been able to reach sorry about the slow reply 😊

@MdImran-lg3tn 2 жыл бұрын

ob😊t

@GPLGrzegorz Жыл бұрын

There is no more to say than grate video bro! U did well done job and this paint should stick this wheels years!

@The_journeyy Жыл бұрын

I appreciate the kind words and it sure does and makes the car look better 😄

@fkkmag8692 2 жыл бұрын

That’s a fine looking job!

@The_journeyy 2 жыл бұрын

Thank you mate it's definitely given my car a nice look to it 👍

@Nevinhattle 11 ай бұрын

Looking sweet bro you for this video, very detailed and proper just what I was after, legend 🙌

@The_journeyy 11 ай бұрын

I am glad the video was of use thank you for watching 🙌

@chriskaczmarek7204 Жыл бұрын

Nice video! Great attention to detail. I appreciate your tips. I’m starting this project Sunday on my Lotus . Warm Regards Chris in Miami

@The_journeyy Жыл бұрын

I appreciate you watching Chris don't forget to throw on three coats of 2k clearcoat to get bodyshop results 👏👏

@nigelbryant5932 3 жыл бұрын

They look FRESH. Great job 👍

@The_journeyy 3 жыл бұрын

Thanks Nigel its so strange how changing something so small can make such a drastic change to a cars look put them on this weekend and I was pleasantly surprised at the difference 😀

@BP-xe7dw 7 ай бұрын

Nice job simple and great finish.

@The_journeyy 7 ай бұрын

Thanks 👍

@GRIBBO-77 11 күн бұрын

Good video. Cheers mate 👍

@The_journeyy 11 күн бұрын

Thank you 🙏

@kokos8165 2 жыл бұрын

Preparation is the Key !!! Great Job Bro

@The_journeyy 2 жыл бұрын

Definitely is bro 💯 just finished painting some bumpers video dropping tomorrow 😊 hope your well

@user-wk3vi6bs9p 9 ай бұрын

Very great job! Made with love!

@The_journeyy 9 ай бұрын

Thank you for the kind words 👏

@sergeantc6122 2 жыл бұрын

Nice job dude, looks great!!!

@The_journeyy 2 жыл бұрын

Thank you for the kind words 🙏

@yystyyst1567 2 жыл бұрын

Excellent job looks awesome

@The_journeyy 2 жыл бұрын

Thank you mate I appreciate the feedback :D

@Tyr659 2 жыл бұрын

Lovely job there mate🙌🏼

@The_journeyy 2 жыл бұрын

Thank you mate 🙏

@wesleymeadows3183 Ай бұрын

Great Job! And the encouragement i needed to DIY it 😂

@The_journeyy Ай бұрын

Glad you liked the video for the best results don't forget to throw on 3x coats of clear 👌

@angelitolozano8742 2 жыл бұрын

That looks tight man great job

@The_journeyy 2 жыл бұрын

Hey Jose thank you for the kind words 😊

@SonofChurchill Жыл бұрын

Wheels looking sweeet

@The_journeyy Жыл бұрын

That sounds amazing :D

@pavel514mtlQC Жыл бұрын

straight to the point. many thanks for the vid.

@The_journeyy Жыл бұрын

Hi PvIT I'm glad you like the video thank you for the kind words 😊

@arfurdaley6399 Жыл бұрын

Great job fella 👏👏👏🤩🤩

@The_journeyy Жыл бұрын

Thank you for the kind words 👏

@Reecepieces5 9 ай бұрын

Made me confident to refurbish my alloy factory wheels, ive been wanting to, i just wonder, how long do you think the paint will last?

@The_journeyy 9 ай бұрын

It will last as long as the typical bodyshops last if the work is done without skipping steps 😁

@wayneturner7678 2 жыл бұрын

nice job they look mint

@The_journeyy 2 жыл бұрын

Hello Wayne thank you for the kind feedback 🙏

@pauldempster640 2 ай бұрын

That look great . Doing mine in a few days . Thanks

@The_journeyy 2 ай бұрын

Thank for don't forget to put 3x coats of clear for the best results 👌

@jayplunks Жыл бұрын

This was amazing and i rarely comment or like

@The_journeyy Жыл бұрын

I appreciate the feedback bro thank you 👏

@Certiwhipps 2 жыл бұрын

Well done very well explained

@The_journeyy 2 жыл бұрын

I'm glad you think so thank you Zain 😊

@volt_nightroleplayminecraf6998 Жыл бұрын

Plan on doing this shortly but two wheels at a time since I don’t have that many jsckstabds

@The_journeyy Жыл бұрын

I think for most people it's like that as well I've only got two jacks too it's going to come out looking great 👏

@crewcorp 2 жыл бұрын

excellent job on the rims, found your video as i was looking for the best way to do it, a bonus thing is you have the list of whats needed right there too, now is that list for all 4 wheels ?

@The_journeyy 2 жыл бұрын

Hi there Aceslong thanks for the feedback and yeah that's my list to do all four wheels yours might be the same or slightly different depending on your alloy size I'm running on the original VW 185/R60/15 hope that helps 😄

@maxm3445 Жыл бұрын

Very nice video!

@The_journeyy Жыл бұрын

Thanks Max thank you for the lovely feedback 😊

@bigfist255 2 жыл бұрын

Good 👍 I'm going to do mine .

@The_journeyy 2 жыл бұрын

Hi Bigfist255 I'm glad you're have fun its well worth it👏

@Bull1the1Great 8 ай бұрын

Looking fine!

@The_journeyy 8 ай бұрын

Thanks! 😀

@berni9977 Жыл бұрын

Thanx Bro finally a vid that is easy to follow..Great work

@The_journeyy Жыл бұрын

Thank you for the kind words 🙏

@leisiaduskin596 Жыл бұрын

Awesome! Could you please come do mine. Very nice job - professional look.

@The_journeyy Жыл бұрын

Hi Leisia thank you for the kind words I would if I only had time 😊

@ReimaginedWraps 2 жыл бұрын

Great work! A great video as well! Do you recommend any specific brands of gloss black or clear that you have found to work better than others?

@The_journeyy 2 жыл бұрын

Thank you, not any specific gloss blacks the one I used is one mixed by local autobody shop the clear I'd recommend proxl 2k clear the results are like professional booths hope that helps 😁

@rodrogers6895 7 ай бұрын

I may never do that, but it’s a great idea!

@The_journeyy 7 ай бұрын

👍

@dominicmolloy561 Жыл бұрын

Now paint the garden wall behind you 😁

@The_journeyy Жыл бұрын

On it now 😂

@PoughTownBoy 8 ай бұрын

Excellent!

@The_journeyy 8 ай бұрын

Thank you 👏

@santinho212 2 жыл бұрын

Fantastic job

@The_journeyy 2 жыл бұрын

Thank you mate 😊

@santinho212 2 жыл бұрын

@@The_journeyy its just not about how pristine them wheels looked like after the fantastic job but you also guided us through the right steps bit by bit and sticks in our mind I'm gonna do mines too hopefully near as good as yours. Thank you again

@Stravinsky14 2 ай бұрын

Wow! Fantastic

@The_journeyy 2 ай бұрын

Thank you! Cheers!

@eneashkambi2891 2 жыл бұрын

Nice work just ordered all the products planning to do it on my amg wheels let’s see how is that gonna go 😂

@The_journeyy 2 жыл бұрын

Hi Enea that's great you'll see how easy it is look forward to hearing back from you I really enjoy when people tell me/show me how great their new wheels look 😀

@ironman77725 2 жыл бұрын

Great video mate, I’m planning to spray my silver alloys black. Do I need to rub all the silver paint off back to the metal first? Thanks!

@The_journeyy 2 жыл бұрын

Thank you mate appreciate the feedback and you don't need to rub all the paint off you just have to rub it down until the surface is no longer shiny and looks Matte

@fredrk5223 2 жыл бұрын

Great job 👏, just tell me name of the gloss black paint you used please

@The_journeyy 2 жыл бұрын

Hi there its called Mr Aerosol I've put the link for it below hope that helps 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6

@taylormoore4991 Жыл бұрын

Looks great! God bless!

@The_journeyy Жыл бұрын

Thank you mate appreciate the kind words 👏

@JordanAnimations3D 3 жыл бұрын

I really need to do this, my car is far too basic for my liking 😂

@The_journeyy 3 жыл бұрын

For as long as I can remember my cars have always been standard as well I saw other nice looking modified cars and thought too much effort for me 🤣 its such a nice feeling making your car look nicer and it doesn't need to break the bank I've found

@darryljohnston1284 2 жыл бұрын

Beautiful job cheers

@The_journeyy 2 жыл бұрын

Hey Darryl thanks for the kind feedback 😀

@alimalik4730 Жыл бұрын

How many bottles required for standard 17 inches rims ? What are the things required for that. Can you please list it down with quantity thanks.

@The_journeyy Жыл бұрын

These rims I painted in this video are 15 inch rims all the items I used are in the description that might give you an idea of how much you might need for yours hope that helps

@brianwiseman9518 2 жыл бұрын

meticulously done. nice

@The_journeyy 2 жыл бұрын

Hi Brian thank you for the kind words 👏

@barrymatthews2606 Жыл бұрын

Hi great job on the wheels. Im going to be doing my wheels soon on my corsa e, in black. Would be ok to put on 4 coats of black when spraying the wheels? Then once they are dry four coats of clear lacker so it will last longer.

@The_journeyy Жыл бұрын

Thanks for the feedback if your putting on your colour and it looks like you've not got great coverage then yeah you can put on another coat of black. if you use good products you shouldn't need to put on four coats of clearcoat. For bodyshop results use 2k clearcoat three coats of that and your wheels will be shining and durable 😄

@brockslider8562 Жыл бұрын

Great video man! Just got done with mine! Are they good to put back on the car the day after or how long is the curing process/how long should you keep them away from the elements? -B

@The_journeyy Жыл бұрын

That's amazing to hear it really does depend on a lot of different factors one of them being where you did the job and the temperature in that area I personally left mine until the following day because I painted them in 17 degree weather and I don't have a paint booth to bake them in for 30 minutes if the temperature was good in your area and its a nice hot day they could be ready to go back on in about 2-4 hours but for me personally I always leave them until the following day 😀

@brockslider8562 Жыл бұрын

@@The_journeyy wow thanks for your quick response. It was nearing 95 degrees when I finished mine up yesterday, so I think I will be good by the end of today. 🙏

@The_journeyy Жыл бұрын

Wow that's incredibly hot weather and also great for drying I agree with your assessment 👍

@Askabar 2 жыл бұрын

This is an excellent video, thank you so much! I completed the above on my BMW F20 and they look amazing. Only thing is, when I put my lug nuts back on, the wheel brace touches the inside and scrapes very easily and can see the old paint underneath. Is this common?

@The_journeyy 2 жыл бұрын

Hello Jason I'm glad it looks good and wow on the F20 that is a beautiful car and yeah it can be best way to not have that is to make sure you put 3x coats of clear on and use a good 2k clearcoat I realised after I released the video it only shows me doing 2x coats of clear but it's actually 3x coats for best results so I pinned a comment saying about that in the description hope that helps 😁

@glynn36 Жыл бұрын

Excellent job. Could you list all the paint and sand paper required please. Ive never done anything like this what should i look out for and any tips?

@The_journeyy Жыл бұрын

Tips I would advice is don't forget to apply three coats of clearcoat Hi here is the list of items used: Items used in video: 1- Masking tape - ebay.us/o8cm6F 1 - Tack Rags - ebay.us/F0RxGn 1- 3M Facemask - ebay.us/4EHZGm 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 1 - Red Scotch Bright - ebay.us/KeivOr 1 - 400 & 800 Grit Sandpaper Wet and Dry - ebay.us/nvpNW7 1- Panel Wipe - ebay.us/OG3qpL 1 - BOX of Gloves - ebay.us/vcMjnM 1 Meguiars Ultimate Compound - ebay.us/7FrpIU 1 - Panel Wipe - ebay.us/UJfurk 1- Plastic Bin Bags

@glynn36 Жыл бұрын

@@The_journeyy Brilliant thankyou 👍🏻

@The_journeyy Жыл бұрын

Thanks for watching 😁

@richardmauto 2 жыл бұрын

54k you know, my G!!!

@The_journeyy 2 жыл бұрын

Its crazy because I didn't expect any of these videos to get more than two views I'm grateful for the responses over 45k views a month I can't wait to see what we will be doing in the next 10 years 👏

@jodisdream7357 11 ай бұрын

Yeah!!!

@The_journeyy 11 ай бұрын

👏👏

@onwardlemongaming 2 жыл бұрын

Hey man they’re beautiful. I plan on doing this in the spring time when I change my brakes out. How long did the process take in total?

@The_journeyy 2 жыл бұрын

Hello Cyrus thank you, it depends on your environment where your spraying. I did mine when it was like 19 degrees outside in my Gazebo. Started around 10 and finished around 6 the spraying of the coats is quick its the drying times that add up. If I had a nice warm garage and a heat gun I could have halfed the time hope that helps 😊

@ebz_official5790 2 жыл бұрын

Quick question bro. You put 3 coat of aresol black spray in your video but mention 2 in the the description. Do u buy 3 or 2 . And is there a specific order you spray them in or do u just pick one can and start with that as the first coat

@The_journeyy 2 жыл бұрын

I used two cans of each bottle so 2 cans of the black paint, 2 cans of primer and so on When you paint the tyre you'll need to do 3 coats of primer first then 3 coats of black paint and then 3 coats of clear The order is primer, paint, and then clear coat hope that helps 😀

@craigbarker_calisthenics8022 Жыл бұрын

I've always wondered can you spray color one day and the gloss the next day or even days later, and if so does it need a key to stick?? Or can you just make sure the wheel is clean and apply the clear coat?? Thanks.

@The_journeyy Жыл бұрын

Yeah you can leave the clearcoat for another day or whenever your ready but it will need keying with 800 grit before throwing on the clear

@craigbarker_calisthenics8022 Жыл бұрын

Thank you for your reply, much appreciated, and if painting the same day, an hr after the last color coat has been applied the colour doesn't need a key with 800 grit?? Thanks again.

@The_journeyy Жыл бұрын

On the same day if its an hour later or a little bit earlier you can go straight ahead and start your clearcoat without needing to key it with 800 grit

@tendekaimutemeri5231 3 жыл бұрын

Great job , u done awesome 👌👏👍

@The_journeyy 3 жыл бұрын

Thank you bro just trying you know 💯

@lukepwc1724 2 жыл бұрын

How’re things man, I sprayed mine, similar finish to yours. Can I simply sand prime and respray flaked spots ? Or would I be better scrapping it all and removing it. It’s only on 1/2 slots where the alloy meets the tyre

@The_journeyy 2 жыл бұрын

Hey Luke, that is one way you could do it yeah or another method is you could give it a light sand with 2000 grit touch it up with some touch paint using a brush and then clear. I've curb mine so will be making a video next showing how I touch them up using that method 😁

@seeannor23 2 жыл бұрын

Great video! how many cans of black glossy spray paint did you use?

@The_journeyy 2 жыл бұрын

Alright mate I used 2X - Gloss Black Aerosol Cans

@seeannor23 2 жыл бұрын

@@The_journeyy Thanks mate!

@The_journeyy 2 жыл бұрын

No worries mate Anytime 👍

@carlosbmartinez6457 9 ай бұрын

i could not find the gloss black paint ebay .. help !!! the one used ,, help please ,,, love the gloss black ,,,very shine...

@The_journeyy 9 ай бұрын

Hi Carlos sorry to hear you couldn't find it here it is ebay.us/JSf4z6

@bigyjeep Жыл бұрын

Fantastic job just wondering do you paint the inside of the rim

@The_journeyy 11 ай бұрын

Thank you and yes on this job I painted the inside as well 😊

@whisperproductions9880 2 жыл бұрын

Put some some more info on there like how many cans did you use, brand ect...

@The_journeyy 2 жыл бұрын

Got you covered bro it's all in the video description just have a look below the video 😁

@leepearson4833 Жыл бұрын

Can I ask do you have a list of the products that you bought to complete This? For example how many can you bought of each gloss primer and clear?

@leepearson4833 Жыл бұрын

Also loved the video 100% motivated me to give it a go on mine

@The_journeyy Жыл бұрын

Hi Lee thanks for the feedback and yeah I do have a list of everything Items used in video: 1- Masking tape - ebay.us/o8cm6F 1 - Tack Rags - ebay.us/F0RxGn 1- 3M Facemask - ebay.us/4EHZGm 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 1 - Red Scotch Bright - ebay.us/KeivOr 1 - 400 & 800 Grit Sandpaper Wet and Dry - ebay.us/nvpNW7 1- Panel Wipe - ebay.us/OG3qpL 1 - BOX of Gloves - ebay.us/vcMjnM 1 Meguiars Ultimate Compound - ebay.us/7FrpIU 1 - Panel Wipe - ebay.us/UJfurk 1- Plastic Bin Bags

@gdawwg1125 Жыл бұрын

Wow !!!

@The_journeyy Жыл бұрын

Thanks for the feedback :D

@gdawwg1125 Жыл бұрын

@@The_journeyy now I’m going to have to re-do my wheels

@The_journeyy Жыл бұрын

Appreciate the feedback make sure to put three coats 2k clearcoat for bodyshop results and longevity 😊

@hectorjr5128 2 жыл бұрын

Nice Excellent job! I would like to do the same thing on my truck wheels but I have a question 🙋🏻‍♂️ is the paint and shine permanent when the process it’s done or does it fade away ? 🤔

@The_journeyy 2 жыл бұрын

Hello Hector if done correctly the results are like the bodyshop mine still gloss like the first day they were finished hope that helps 😄

@hectorjr5128 2 жыл бұрын

Thanks that’s very helpful 👍🏻

@goatpier7570 2 жыл бұрын

@@hectorjr5128 do a clear coat when you’re done and maintain it by not taking your car we’re they use scrubs.

@MOHANAD84h 2 жыл бұрын

Great 👍🏻 May we know the materials and spray you are using?

@The_journeyy 2 жыл бұрын

Hi there its called Mr Aerosol I've put the link for it below hope that helps 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 If you've any other questions about items used I've put a list in description 😊

@alycapo3391 2 жыл бұрын

when you finally removed the plastic and masking tape did you use a blade or a knife to score. or did you just peel it off?

@The_journeyy 2 жыл бұрын

I'm not getting the question mate you a knife to score what? Once the job was done I just peeled the masking tape off and the plastic of and that was job done hope that helps 😊

@alycapo3391 2 жыл бұрын

@@The_journeyy sorry I was assuming the paint was so thick it left like a layer. It happens with acrylic based pants. You can to score the masked area otherwise you risk peeling off the painted area but that's applied with a brush. Just wanted to make sure I didn't have to do that with the spray can. Also how long did you leave between the primer coats Top coats Lacquer coats Sorry for all the questions 🤦‍♂️ it all goes down tomorrow for me and I keep thinking I might miss a step

@The_journeyy 2 жыл бұрын

First time I've heard of that issue I didn't have any issues like that I just prepped my area properly masked up and got to work. Left it a day after the primer went on but I could have waited just a few hours if I liked I left it an hour after the final paint coats and then one hour between the clearcoats I've had many people get in contact on instagram showing me their awesome results judging by the sounds of things you know a thing or two about painting so it should be a walk in the park for you 😄

@alycapo3391 2 жыл бұрын

@@The_journeyy one last question, I'm having problems getting 800grit wet sand paper, I've got 1200 and 600. Which would you use?

@The_journeyy 2 жыл бұрын

No worries mate you can ask as many questions as you like, have you tried Ebay or Amazon? Or like a local shop paint shop near you? If your referring to sanding the primer after its cued I'd say the 1200 if your really not able to get 800 grit probably better than using nothing if you use nothing you just won't have as good a gloss

@darlington6314 Жыл бұрын

Quick question does it matter how long you leave it after the last primer? Because you said leave it over night before using the 800

@The_journeyy Жыл бұрын

Yes it matters how long you leave it if you don't let the primer dry properly and you said it the results will not be very good. You don't have to leave it over night like me that's just a preference of mine depending on your location and the temperature in your painting environment if the primer is dry after 1 hour or whatever timescale you can sand it as a bare minimum I'd leave my primer to dry for a few hours if it was a hot day and then sand with the 800 if its a colder day more hours

@darlington6314 Жыл бұрын

@@The_journeyy I wish I can show you my results. Thanks to you. My tires look magnificent

@The_journeyy Жыл бұрын

I've got email feel free to send over some pictures reginald71993@gmail.com glad your results come out as good as mine ☺️

@koreywilliams4570 Жыл бұрын

I got factory wheels on my Cadillac and there just the alloy ones. Kinda dorky looking. I looked around online for some new ones but I didn't like any of them and there all really expensive when you add the new tires. I'd rather paint the stock ones and get the exact same look as if I were to buy new ones.

@The_journeyy Жыл бұрын

That's what I did on mine when I done these and it made me appreciate my car again hated the old wheels 😊

@koreywilliams4570 Жыл бұрын

@@The_journeyy my front passenger side wheel has some damage from a few months back when some guy side swiped me on the highway. It's nothing serious just some black smudges. The main damage is a little ding on the wheel well just above the tire. Soon as I fix that and the couple hail dings on the hood it should be back to brand new 😁 this is the nicest vehicle I've ever owned my last one was a 96 s10. So im doing everything I can to take care of my Cadillac it's only a 2013 SRX but I absolutely love it.

@The_journeyy Жыл бұрын

Sounds like a new car to me I bet it looks great and I love the fact your as passionate about cars as I am 👏

@koreywilliams4570 Жыл бұрын

@@The_journeyy aside from the couple dings and paint pen messups I still need to fix it does look amazing and it's fun to see all the heads turn as I ride through town 😁 also this could just be coincidence but when I wash my car I notice half the town is over at the car wash doing the same lol. Last time I did it the neighbor down the street started washing his. Love the town rivalry.

@The_journeyy Жыл бұрын

Nothing better than that joy and fun these things bring and your inspiring the masses to make their car shine 😁

@SultanAli-di4fp 2 жыл бұрын

Great job how many black paint and primer bottles need for four wheels?

@The_journeyy 2 жыл бұрын

I'm not sure dude have a look at the description I've got the list there and quantities hope that helps 😁

@BB-gm4xs 2 жыл бұрын

What's the point in the last process using the cutting compound? Finished my wheels and darent use the compound in case it removes the laqueer!

@The_journeyy 2 жыл бұрын

The point is it just makes it shine more but that's just me wanting silly gloss the wheels didn't even need that after I finished they were beautiful! I waisted 48 hours before just buffing them with the pad and 2k is very durable it won't come off but tbf its not really needed

@BB-gm4xs 2 жыл бұрын

@@The_journeyy thank you they came out great. Top man!

@The_journeyy 2 жыл бұрын

There's nothing I love hearing more than when people tell me they got the same results I did thank you for reaching out 🔥

@robertwymark6811 2 жыл бұрын

Great job mate. What size wheels are these. I have some 20" and need to work out how many cans of each to purchase.

@The_journeyy 2 жыл бұрын

Thank you Robert 😊 I see you've got some proper tyres there. I've got 15inch wheels on mine

@robertwymark6811 2 жыл бұрын

How many cans did you use.

@The_journeyy 2 жыл бұрын

2x Primer, 2x base, 2x clearcoat if you're curious about any other quantities there's information about everything used in the description hope that helps

@majesticblasian651 Жыл бұрын

Can I still do this without taking my alloy wheels off the vehicle?

@The_journeyy Жыл бұрын

kzfaq.info/get/bejne/esyGeJpy2LjJZZc.html Yes you can do it without taking the wheels off

@cbfwcodak6564 Жыл бұрын

I have dark gray rims on my car I want to make them black should I still do the gray primer ?

@The_journeyy Жыл бұрын

A light grey primer would still be good mine were silver I used a grey primer which wasn't that much lighter than my silver hope that helps

@jacquezghardy Жыл бұрын

If he held the can farther back he’d get a better more evenly spread out pattern

@The_journeyy Жыл бұрын

@jaskiratsingh7115 2 жыл бұрын

how much can u have used to spray 4 wheels is it 1 can of primer for each wheel and 1 can of paint each wheel

@The_journeyy 2 жыл бұрын

Hi Jaskirat the whole job took: Hi there its called Mr Aerosol I've put the link for it below hope that helps 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 If you've anything questions about items used I've put a list in description 😊

@maz.r1408 2 ай бұрын

i got similar wheels, how many cans of spray paint, primer and clear coat did you need so i know how many to order

@The_journeyy 2 ай бұрын

Can't remember the exact quantities it's been a while since I did this job the whole list of items used and quantities is in the video description 😊

@maz.r1408 2 ай бұрын

@@The_journeyy Thanks, appreciate it helpful video as well

@bindrops8927 Жыл бұрын

Just come across this video and am looking to paint mine how many cans did you use for all 4 wheels and what paint did you use brand wise ?

@The_journeyy Жыл бұрын

The brand is called Mr Aerosol if you look at the description got all the quantities and items used hope that helps 😄

@bindrops8927 Жыл бұрын

@@The_journeyy cheers ill have a look

@mandoosuiii8072 Жыл бұрын

Hey man after im done puttin on the last clear coat, how long should I wait before putting on my car

@The_journeyy Жыл бұрын

You could put it on a few hours after it's dried but personally I like to leave it overnight and then put it on the car

@mcgarvy7 Жыл бұрын

Great work man, how is the paint holding up

@The_journeyy Жыл бұрын

The same as when first done if the job is done properly and good materials are used you'll get the same results as a bodyshop 😊

@mcgarvy7 Жыл бұрын

@@The_journeyy k, I was looking at powder coating my wheels but I’ll just paint them , powder coating is way more expensive

@The_journeyy Жыл бұрын

I've heard it can be very pricey 😵

@YJ-fx6ry 2 жыл бұрын

hey dude thanks for sharing the great video nice job how many cans of clear coat primer and color paint you used for a set of tire

@The_journeyy 2 жыл бұрын

Hi there YJ thank you for the kind words I used: 2 - Proxl 2K Clear - ebay.us/Lz1EzI 2 - Etch Primer Grey - ebay.us/4YF8D0 2 - Gloss Black Aerosol Can - ebay.us/8DWdC6 If your curious about any of the other quantities all the quantities are in the description of the video hope that helps 😁

@YJ-fx6ry 2 жыл бұрын

@@The_journeyy for 4 tires that is great thank you very much

@The_journeyy 2 жыл бұрын

It definitely is great and no worries thanks for reaching out 👏

@Itzdaydaybtw 2 жыл бұрын

So what all spray paint cans do you need? Which type

@The_journeyy 2 жыл бұрын

Hi Kevin have a look at the description you'll see all the products I used

@morriszachrisson8359 4 ай бұрын

Such question. I don´t want to paint wheels. I want to paint a plastic figure black. If I just spray Mr Aerosol Gloss Black directly whithout any applying any white or grey primers, will I get the same black mirror effect?

@The_journeyy 4 ай бұрын

You need to get paints suitable for plastic and yes the result can be reproduced if the job is done correctly

@geniusme2010 Жыл бұрын

Nice one bruv look good! How much did all the paint come too?

@The_journeyy Жыл бұрын

I can't remember I bought the paints a long time ago all the times used are listed in the description hope that helps 😊

@yasirKhan-nt2pq Жыл бұрын

And how long will this paint job last with its glossy finish?

@The_journeyy Жыл бұрын

Same as the bodyshops

@r444t6 3 жыл бұрын

Wicked video bro👌🏼 I've got a can of E-tech alloy wheel lacquer and the instructions on it recommend to sand down the paint with 1200 wet sand or the lacquer might not stick well. Do you think that step is necessary? Thanks bro

@The_journeyy 3 жыл бұрын

Thanks bro 😊 yeah I would say its a must give it good adhesion it will make the job look tidy and not starting peeling hope that helps

@r444t6 3 жыл бұрын

@@The_journeyy No worries 👌🏼If I was to use a 2k lacquer I'm guessing I wouldn't have to do that step? I don't believe this e-tech lacquer is 2k even tho it's made specifically for alloys.

@The_journeyy 3 жыл бұрын

If you was using 2k you would have to do the same thing, 2k is much more durable than 1k but I'm guessing since what your using is for wheels it should be very durable 👌👌

@r444t6 3 жыл бұрын

@@The_journeyy Ah wicked 🙂 Nice one bro, appreciate the quick responses 👊🏼

@The_journeyy 3 жыл бұрын

No worries bro if you ever have any other questions just drop me a message 👊👏

@leemcgillivray Жыл бұрын

How many cans of spraypaint did you need to use? X

@The_journeyy Жыл бұрын

It's been a while since I did this job can't remember exactly I've got quantities for everything used in the video in the description hope that helps 😊