How to Square Up a Panelsaw

Рет қаралды 18,634

3 жыл бұрын

Rob from Markfield Woodworking tunes up our old Wadkin CP32 Panelsaw. This video has been screen-recorded from my instagram stories and re-uploaded to KZfaq by request, for easier access and for those who do not use Instagram.
3:00 - Setting the sliding carriage parallel to the blade.
3:30 - Using your ears not your eyes.
5:15 - 5-cut squaring method
9:10 - Setting the rip fence
10:35 - effect of wear on cross cut fence - affecting squareness of smaller pieces
For regular insights into our fitted furniture production and business growth you can find us on instagram:
/ freebirdinteriors
You can find out more about Markfield Woodworking Machinery here:
www.mwmachinery.co.uk/
/ markfieldwoodworkingma...
And here is my member site with additional content for woodworking business owners:
www.buymeacoffee.com/freebird

Пікірлер: 42

@3falexchina953 2 ай бұрын

Hello! Very interesting machine I'm do business in China for panel saw almost 20 year. I tell for my Chinese supplier: "Here in China I see just two machine working properly and it is WADKIN!" I found this machine about hundred years old and still working!!! Now this machine exposed in Lunjiao expo centre. Actually I think this brand is over, but I see you got machine yanger than hundred years))

@user-ut5zo1cu8i 10 ай бұрын

Rob knows what he's talking about

@mcccarpentry6after5 3 жыл бұрын

Thanks Alaistar Just in the process of doing this myself. Very helpful

@rorymccann9198 11 ай бұрын

After 15 years of messing around and thanks to your video I have finally got my robland panelsaw squared.

@Alastair_Freebird 11 ай бұрын

That’s great to hear!! I have a friend with a Robland and he’s reaching the end of his tether with it - really can’t get it square!

@AndersKjaerProduction 3 жыл бұрын

Would love more of your Instagram stories here on KZfaq - Thanks

@Alastair_Freebird 3 жыл бұрын

Thanks for this feedback, I will work on this!

@samrix5793 3 жыл бұрын

Love it!!

@MelbourneAlan 3 жыл бұрын

great methods shown. its so obvious when you see it done like that. i would love to see more insta stories but this really shows why they dont work for this kind of content. it gives me a headache, too jumpy and stop start. it is the reason i generally ignore all instagram stories with loads of small bits like that. almost unwatchable in most cases. great to see the saw working perfectly though

@bisarowood 3 жыл бұрын

I'm probably do for a fine tune on my Felder saw, they do stay true for a long time

@moderntraditional3172 3 жыл бұрын

I really appreciate your videos. Thanks so much for taking the time to do them. I too don't do instagram.

@Alastair_Freebird 3 жыл бұрын

Thanks for that feedback 👍

@outbackinteriors7656 3 жыл бұрын

It’s bang on now, thank you for the help boss 👍👍👍

@Alastair_Freebird 3 жыл бұрын

Great to hear you flew straight into action!

@bensangari2226 3 жыл бұрын

Very useful video. I know it's a lot of effort and time to make these videos. I have a SCMI panelsaw, also second hand and also slightly out of square. I've been doing work arounds to square my cuts but your video gave me the confidence to get my manual out and try and square it. Woodworker from Buffalo, NY sends thanks!

@Alastair_Freebird 3 жыл бұрын

That’s great to hear!

@davidbryanwoodworksandmore 3 жыл бұрын

Interesting. I’ve got an older scmi slider but not using cause of no dado capacity. But I’d love to hear about your scmi. Mine is a short stroke. I’m debating on outing in my shop.

@yazidamir 2 жыл бұрын

Doing videos on KZfaq so much better 👍

@Alastair_Freebird 2 жыл бұрын

You mean you prefer KZfaq to Instagram?

@wjm1676 3 жыл бұрын

Also would like to see more videos on here Alastair, I don’t use Instagram. 👍🏻

@davidbryanwoodworksandmore 3 жыл бұрын

Thanks for the video. I am contemplating using an older scmi in my shop in addition to my cabinet saw. As the scmi doesn’t have a dado capacity. But I’m sure either way, it will need squaring. This was a great video. And I appreciate your quality as I’m building my channel slowly but it’s getting good attention. I hope to have a nice following like you soon. I’m in the United States.

@Alastair_Freebird 3 жыл бұрын

Stick at it, it takes time. Try Canva for creating thumbnails. Glad you liked the video!

@davidbryanwoodworksandmore 3 жыл бұрын

@@Alastair_Freebird awesome. Thanks for the tips. My daughter has been telling me to use canva also. Thanks a lot.

@davidbryanwoodworksandmore 2 жыл бұрын

Hey I did finally get a slider and totally love it. Man I am very happy to be using one after so many years. I just came across this video and thought I’d say hi. Hope your doing great.

@luapkirner5331 2 ай бұрын

I’d make a cut and then measure out a 3-4-5 triangle, and I mean a 3 foot, 4 foot, five foot (yes I’m in the US). See how far it’s out and then make adjustment and cut again. No five cut method needed.

@Alastair_Freebird Ай бұрын

Makes sense. I feel that the five cut method sort of amplifies the precision though

@wilyjetset 2 жыл бұрын

great video as ever. Can you get the crosscut fence milled back square? I was thinking of an old slider with alu fences but that's put me off!

@Alastair_Freebird 2 жыл бұрын

Yes you could do this and in fact I have been meaning to do it myself on our CNC machine but it hasn’t been enough of a priority to get around to it, as we’ve been able to cut square enough really

@Advcrazy Жыл бұрын

Awesome video!! This is a big help for me dialing in my first sliding saw! Now can you get him to show us the best way to dial in a planer/jointer ? 😅

@Alastair_Freebird Жыл бұрын

We don’t even have a planer/jointer these days, but I do remember it being tricky when I had an old Wadkin one in the garage!

@petermartinpetermar 3 жыл бұрын

Alastair I think long term you may have issues with that worn fence at the blade end. Maybe keep a small shim that drops into place handy. better still add add thin sacrificial fence up against the existing - packing out at the blade end. I cut virtually everything off the slider now with the rip fence only used for quick board rips or parallel cutting. Clamps are also a great help.

@Alastair_Freebird 3 жыл бұрын

Thanks yes it does need solving; we’ve looked into getting a new fence, but we are holding off until we get the CNC machine because it’s quite possible that once we have that up and running we could save floor space by dispensing with the Panelsaw altogether (an reinstating my small Wadkin rip saw. I know opinions vary on the wisdom of this. It will entirely depend on how successfully we set up the whole workflow to maximise the use of CNC.

@junaidjutt7460 5 ай бұрын

How to starighten the slide of the slide cutter and how to level right handed top , please tell me a little

@Alastair_Freebird 5 ай бұрын

Is the cast iron top not level and parallel compared to the sliding table?

@adriandotsmall 3 ай бұрын

👍

@outbackinteriors7656 3 жыл бұрын

Excellent video, really useful. Will do 5 cut test tomorrow, results will be funny, mines way older than yours 😆 altendorf

@outbackinteriors7656 3 жыл бұрын

5mm out with the 5 cut method 👍

@outbackinteriors7656 3 жыл бұрын

Not as bad as I thought it would be

@dialog245 2 жыл бұрын

Could the crosscut fence be removed and reversed, the aluminium profile looks symmetrical, the rivets for the tape could be drilled off and refitted on the other side. Nice channel, I've subbed .

@Alastair_Freebird 2 жыл бұрын

Thanks for subscribing! Possibly… but there would be a few issues including the scale which is fixed to it. Now that I’ve got a CNC machine I’ve been thinking of skimming the surface flat! But it hasn’t been enough of a priority to bother with yet