Build your business with training from TMBRMAN 💼: www.tmbrman.com SUBSCRIBE for weekly videos! Comment with any questions! Wood staining basics, How to stain wood, how to stain wood products easy.
Пікірлер: 53
@x4xdeadshotx4x88 Жыл бұрын
Do not shake the can you need to stir it shaking will cause bubbles
@connorpitcher2846 Жыл бұрын
Bubbles dont matter with stain, they do however matter with polyurethane
@leroyrichards274711 ай бұрын
Yeah that can says do not shake
@ryanshepherd645710 ай бұрын
Him: It doesn't have to be so complicated. Everyone: Poly, lacquer, shellac, towels, strip, don't shake, no wait don't stir, special roller, special towel, stir it with gold rods made from the tombs in Egypt! Him: ughhhh...nah . I love how everyone is telling this dude to do what every other KZfaq video says and he literally said in the beginning "it doesn't have to be that complicated" ... He's aware of all yalls steps and 42 different methods, he just doesn't care and all the comments are telling him how to do what he does not want to do lololol
@amandawyman27624 ай бұрын
That’s no freaking joke! I’ve watched video after video
@trigunstudios217Ай бұрын
It doesn't have to be complicated if the goal isn't to make a lasting finish
@lifeoftim5388 Жыл бұрын
Looks good. Try sealing with a polyurethane on top of that. Makes the natural wood grain pop out
@sexylipslikemorphine5 ай бұрын
Stain needs a top coat for sure.
@calebreeves9231 Жыл бұрын
This was very helpful. Thanks man!
@RuneCarverLLC8 ай бұрын
😳🤔 Minwax Golden Oak is my go-to base coat for nearly all of my projects, It is probably the most predictable and most satisfying product they make! 👍👍👍
@justinhoag97506 ай бұрын
Really? I just tested it and it’s a weird grey yellow.
@Jay.121720 күн бұрын
Do you have to sand it first ?
@samruhland84824 күн бұрын
Did you pre stain? Is it necessary to pre stain or is that an extra step
@hundewasser112 Жыл бұрын
驚人。我喜歡你的視頻 來自台灣的你好
@CA_AZ4 ай бұрын
What kind density of foam do you use or prefer ? Thanks and hello from AZ !
@sexylipslikemorphine Жыл бұрын
STIR WITH A PAINT STICK DON’T SHAKE
@cathytrujillo432 Жыл бұрын
I have a raised dog dish that I bought off of Etsy, and it came stained with a coat of urethane on it, but my dog on the water side it all came off most of it and so I went out and bought steel wool and sanded it all down and stained it again but the stain only adhered to where I didn’t really send it. Is there a reason why? And since it looks all messed up, should I send it all the way down again with sandpaper this time or shall I paint it give me some advice. Thank you.
@user-qn3ji6sp5t3 ай бұрын
Why do you like a roller over a brush? Why don’t you like the brush as much? Thank you
@HDsharp7 ай бұрын
Can you mix wood stain with beewax?
@n8germ Жыл бұрын
also wood conditioner for soft woods
@Ladioz11 ай бұрын
It's only available in the usa
@luisgonzalez84238 ай бұрын
Dampen the wood first if.you don't have conditioner
@cristag.a34577 ай бұрын
how do I prepare the wood before staining? do I need to sand?
@BrynhildRose6 ай бұрын
I always do at least a light sanding before I stain. In my experience it seems to help for a more even finish without splotches or "blobs" of darker areas.
@dogood6848Ай бұрын
How to remove the stain? My method was off and now it's too dark and blotchy.
@sanmac962110 ай бұрын
Why you put stain if you had to take it out right away ?
@DuckyChair8 ай бұрын
Wiping it takes the excess stain off the table but leaves the stain that has soaked into the table.
@sexylipslikemorphine Жыл бұрын
When staining, just get it on there as fast as possible so it takes more evenly. Then wipe off
@philmurphy7487 Жыл бұрын
Stir dont shake, you goon!
@Yazzieofficial Жыл бұрын
You a clown boy
@corri99347 ай бұрын
Chill out
@josemacias67345 ай бұрын
Quest for everyone here, is there an all in one product to stain and protect from rain? I have a bar and a tony bit of it might hit the side of the bar?
@TheMarshallReed4 ай бұрын
Yes, search sealing stain or something on google, I was in the store the other day and saw some but I can’t remember what brand it was, I think it said weather seal maybe. If you search sealing stain I’m sure it would come up.
@lucasstone91849 ай бұрын
Is there a special kind of roller you use?
@everjoelvalladares22714 ай бұрын
You can use any roller but use one that u think you can do more progress when you apply, try to use one used or make sure your new roller don’t let small things on the wood
@fasikademelash4638 Жыл бұрын
I have wood table and it stains whenever I put glass on it , does this prevent it ?
@allupinya5938 Жыл бұрын
You need a coaster!
@djmylott Жыл бұрын
Or a polyurethane coat on top
@BrynhildRose6 ай бұрын
Adding a poly topcoat (I've had the best luck with 2 thin layers) is going to last you for quite a while if taken care of correctly. I would lightly sand out the water rings with a high grit 220 + sandpaper and then do the 2 thin coats of poly with a light sanding in between coats.
@noonespecial19045 ай бұрын
How long do to wait to wipe the stain off?
@raymondhorton46644 ай бұрын
Anywhere from 0 to 10 minutes depending on how dark you want the tone to be.
@tiffanycurtis4794Ай бұрын
How simple was this? God give him a trophy. 😄These other people make it so difficult.🤦🏾♀️ it’s just not rocket science
@markarmenta3598 Жыл бұрын
What’s your sealer?
@Menibor1 Жыл бұрын
Shaking the stain the way you did will cause bubbles....... you should use a clean stirrer
@markarmenta3598 Жыл бұрын
@@Menibor1 thanks brother
@TheMargo42011 ай бұрын
It says never shake. Stir only. No bubbles.
@joseortega79117 ай бұрын
Stopped watching after you said shake
@US.Florida37 Жыл бұрын
Never use roll for stain never never
@dannybishop627 Жыл бұрын
You 😂don't shake minwax polyurethane U-Stir-It
@taurusfire2083 Жыл бұрын
That's the top coat which yes you don't shake, but stains you can shake.