Thanks for a great, well explained, brief video. Just what I was looking for.
@BigSungHobbies3 жыл бұрын
Glad it was helpful!
@mhouslay72812 жыл бұрын
Super clear and instructive video showing all the steps at a pace that is easy to follow. Thank you very much indeed.
@BigSungHobbies2 жыл бұрын
Glad it was helpful!
@chunkbot2 жыл бұрын
I'm an idiot and should have watched this video first. This made it so much easier than the way I thought I had to do it haha
@BigSungHobbies2 жыл бұрын
I think lessons learned from mistakes are worth much more. Now you know what to do and not do.
@rickcorlett Жыл бұрын
Super clear instructions! Thank you for this.
@BigSungHobbies Жыл бұрын
Glad it was helpful! Thanks for checking out the video, and leaving a comment.
@thedanimalchannel70723 жыл бұрын
I’m sure glad I watched this before mounting my new tires. I was getting ready to use the headlock to clamp the tire down. Your way is much better.
@BigSungHobbies3 жыл бұрын
Glad I could help
@rsxrsx2 жыл бұрын
Wow wish I would of seen this before starting my third wheel. Haha I’ve been doing it the hard way. Didn’t even think about starting for the other side with less screws
@BigSungHobbies2 жыл бұрын
Next time, you will get it done in no time.
@FrambosiaLeQueffe Жыл бұрын
Succinct. 👍
@BigSungHobbies Жыл бұрын
Thanks!
@c.c.93703 жыл бұрын
EVERY TIME I see someone online doing beadlocks it looks so fuckin easy yet when I try to do it theres no fucking way in hell.
@BigSungHobbies3 жыл бұрын
I think most videos make it look like it's something that can be done in few minutes, but it is not. It does take a long time since there are so many screws, but if you take it slow, it's not too bad.
@user-ki6hh4bq8j3 жыл бұрын
Thanks a lot!! 👍
@BigSungHobbies3 жыл бұрын
Glad that the information helped!
@shanec8812 Жыл бұрын
So no loctite on the inner screws and just the outside set?
@BigSungHobbies Жыл бұрын
I have started to add blue loctite on both outer and inner screws as long as it's going into metal. If you have plastic beadlocks, then loctite should not be used.
@michaelhightower81603 жыл бұрын
🤔Now will it be just fine if I use blue loctite on all the screws? Instead of just the first outer rim.
@BigSungHobbies3 жыл бұрын
Yes, definitely. Blue loctite helps to keep the screws in, but it’s not permanent.
@stevenbrooks7776 Жыл бұрын
what do you do when the back ring wont line up because the beed seems to thick. also I've had a problem with dual stage foams also as it seems the insert moves in side the tire a little bit, and it makes look real wobbly
@BigSungHobbies Жыл бұрын
Try using longer screw as a guide. I haven't had issues with mine, so it's tough to help without being able to see the issue. If you are using Proline dual stage foams, then due to the size of the foams it should not be an issue. Crawler Innovations tend to be a bit smaller, so you will need to make sure they are mounted center.
@stevenbrooks7776 Жыл бұрын
I dont what bra d foams are they are a house brand. Are dual stage really all that great? As of yet I haven't seen any advantages
@BigSungHobbies Жыл бұрын
The benefits of dual stage foams can be seen during sidehilling. Keep in mind that there is a reason why most LCG rigs run dual stage foams.
@stevensyrissont20442 жыл бұрын
Hey nice nice video Do you think the Beadlocks can fit on a traxxas slash?
@BigSungHobbies2 жыл бұрын
I am not quite sure. I remember Slash having 2 different sized beadlocks where the inner had bigger beadlock assumming to fit the knuckle though.
@stevenbrooks7776 Жыл бұрын
I'm running1.9 tires on mine with no problems
@josecanseca89794 жыл бұрын
BLUE LOCTITE,NOT LOCTITE PURPLE222?
@BigSungHobbies4 жыл бұрын
Yeah, I use Blue loctite, and it works fine. I have not used purple, so not sure on that one.
@scottpray72523 жыл бұрын
Thanks for the video!
@t.c.tristenmccarthy19202 жыл бұрын
i thought the mark was to say "this is the outside of the tire"
@BigSungHobbies2 жыл бұрын
The mark is to note the compound, either G8 or Predator, in the case of Pro-line tires. The tires are not directional so you can use either way. Personally, I prefer it hidden, but I have seen others the other way...just comes down to matter of choice.