How To STOP WATER From Entering Headlights!

No video

How To STOP WATER From Entering Headlights!

Рет қаралды 112,611

Күн бұрын

Waterproof your headlights so you will never have water, moisture or condensation in them again. We show you how to get rid of the water in your headlights.
Yellowing Headlights or PEELING CLEAR COAT do this • How To REMOVE Yellowin... hope this helps**
ALERT!!
THROW OUT your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
Hello Everyone, SWEET PROJECT CARS here with cool, trick and affordable ways to do things for the DIYER'S OF THE UNIVERSE!
***********************************************
If you would like to help us out.
www.paypal.me/...
***********************************************
_______________________________________
USA TOOLS:
Heat Gun amzn.to/2yXid7z
Venom amzn.to/2B8kLBh
Micro Fiber amzn.to/2yTPhgR
Panel Tools amzn.to/2BhSDvQ
Soap amzn.to/2jCzeBd
Spray Bottles amzn.to/2zSlp7S
Mothers amzn.to/2C18A9Z
Dewalt Polisher Kit amzn.to/2lXtnEi
3M Pad amzn.to/2AWATFU
99% amzn.to/3pxbwDs
Lac Thinner amzn.to/2ILdDPU
New Headlights amzn.to/2EaDj8n
3/8 Rubber Tube amzn.to/2BRqVVH
Permatex amzn.to/2ECdBYn
Tape amzn.to/2C77GbX
Air Die Grinder amzn.to/2BaVhTX
Vise amzn.to/2hLUAYQ
SWEET PROJECT CARS, HANDY
DANDY AIR NOZZLE VIDEO
• Build a "Sweet Project...
_______________________________________
The UNITED KINGDOM TOOLS:
Heat Gun amzn.to/2E2aDz2
Micro Fiber amzn.to/2E8LNgq
Panel Tools amzn.to/2GJ3JfP
Soap amzn.to/2DZ3y2n
Spray Bottles amzn.to/2GLolEa
Mothers amzn.to/2FGYbkI
Dewalt Polisher Kit amzn.to/2GIuOjt
3M Pad amzn.to/2FJ6Zqy
99% Alcohol amzn.to/2nAUVzV
Lacquer Thinner amzn.to/2EBgfxh
Acetone amzn.to/2DZ4bsL
Headlights amzn.to/2DXRYES
3/8 Rubber Tube amzn.to/2nyxlos
Permatex amzn.to/2FHYQSS
Tape amzn.to/2E0l86f
Air Die Grinder amzn.to/2EBaFev
Vise amzn.to/2E05lEk
Venom amzn.to/2DSAauw
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZfaq channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

Пікірлер: 240

@SweetProjectCars 6 жыл бұрын

HELLO my friends, we have had a lot of great subscribers asking how to remove and prevent moisture from their headlights. We share many methods to waterproof your headlight in this video. Have a great weekend everyone of our great SPC's friends :) **NOW if you have yellowing lights or PEELING CLEAR COAT and Mothers does not do the job, you will need to do this **kzfaq.info/get/bejne/fbF8eZugrr29d5s.html** hope this helps**

@gtoboss600 6 жыл бұрын

Sweet Project Cars What about windows freezing shut to the window tracks? Any ideas for that?

@DiversifiedMachinist 6 жыл бұрын

Sweet Project Cars you guys have the absolute best videos on car repairs. Thanks!!

@SweetProjectCars 6 жыл бұрын

yes use these videos kzfaq.info/get/bejne/Y6l1aNxkqZqzfas.html and kzfaq.info/get/bejne/iruWiMd7p9rOZac.html you will find the tools for this project in the "show more" of the video description

@alancooper7062 6 жыл бұрын

Very informative video, I had this issue with my old bmw e46 very easy to fix because the lenses come off so easily (clips ) my ford falcon however is a different matter , first thing is you need to remove front bumper/ apron to remove headlamps , I managed a temp fix by blowing inside with air to clean best I could then left off rubber shroud so it would breath easier, wonder if the vents were blocked ?/ enjoy your videos thanks

@tardeliesmagic 6 жыл бұрын

Impressive video mate.

@AutOdometer 6 жыл бұрын

I can see there is a lot of years of experience that goes into your techniques. There is absolutely no way I can compete as another KZfaq channel with you doing How Tos and DIYs... I must go a different direction. I absolutely love your content and hope you reach 1 million subs this year in 2018 and absolutely kill it with your amazon products. You deserve it.

@SweetProjectCars 6 жыл бұрын

Aut0 we thank you very much for the kind comments and appreciate you being here with us :)

@suefast1904 6 жыл бұрын

I love it when I turn on my iPad and a notification from SPC is there. .first thing I watch!!! 💗 your channel!!!

@SweetProjectCars 6 жыл бұрын

thank you Sue we are here to help good people like you :)

@katebeedot6964 5 жыл бұрын

same here!

@tobyhigginbotham2564 6 жыл бұрын

I almost wish my headlight had water in it just so I could try this. Another great video! Keep them coming.

@SweetProjectCars 6 жыл бұрын

Toby it is actually fun to stop a major issue like this :)

@halseyballistic 6 жыл бұрын

Take it off and fill it up with water, the use this method as practice!

@dawaynebutler8127 5 жыл бұрын

One of the best videos yet guys!! I love the fact that you get right to showing how to fix the problem and half the video isn't about a bunch of crap that doesn't pertain to the problem. Sweet Project Cars is definitely my favorite channel!!!!!!

@SweetProjectCars 5 жыл бұрын

Dawayne Thank you very much that means a lot to us my friend have a great night

@silvergrizzly316 6 жыл бұрын

Sweeeeeeeeeeet!!! My friend your knowledge is endless!!! Years ago I had a 1987 Mustang GT, had moisture in headlights just like this one, it drove me crazy. Young and dumb I drilled a tiny hole in the bottom to let it drain out, worked! But didn't solve my moisture problem. 😂😂😂. Another GREAT video!!! Thanks, GOD BLESS!!!

@SweetProjectCars 6 жыл бұрын

Orange we are very glad to help and share with great people like yourself :) and God Bless you and yours as well :)

@Hectoriousz 6 жыл бұрын

Hate moisture in headlights this is awesome. 👍🏼👊🏼

@SweetProjectCars 6 жыл бұрын

hector my friend here you go :) thanks so much for being here with us

@desvousges4230 6 жыл бұрын

I love this channel. Every diy blows my mind. And I have been wrenching for 20 years.

@SweetProjectCars 6 жыл бұрын

Richard thank you very much we truly appreciate that and are very glad you are here with us :)

@dna59 6 жыл бұрын

I just had to fix condensation on a headlight yesterday. Your method of finding the leak is much easier than how I did it for sure. Great tip!

@SweetProjectCars 6 жыл бұрын

shane glad we could help my friend :)

@spozz6633 6 жыл бұрын

Every time I open a computer, this is the first video to be seen and somewhat sketchy if there is no video from Sweet Project Cars. once again thanks for saving my money from buying headlamps and brake lights, I've tried a variety of techniques to avoid it from happening but you've once again shown a fairly easy way, a million thanks. thumbs up

@SweetProjectCars 6 жыл бұрын

Spozz glad to help and we love it when you come around :) thank you very much we truly appreciate that and you being here with us :)

@thejasonkellett 6 жыл бұрын

Another Awesome vid by SPC! Just bought my 16 year old son an older Nissan Altima that has many of these problems...He and I are going over the whole car fixing things as we go!

@SweetProjectCars 6 жыл бұрын

Tyler that's awesome I did the same with all my 4 kids as well...we thank you very much for the kind comments and appreciate you being here with us :)

@Kingdonnerkebab 6 жыл бұрын

Now that is a top tip on how to fix a common problem. Could watch your vids all day Mike 👍

@SweetProjectCars 6 жыл бұрын

Tuddie thank you very much we truly appreciate that and are very glad you are here with us :)

@lani1life 6 жыл бұрын

Where have you been all of my driving life. I'm so glad that you are willing to share your knowledge. Thanks.

@SweetProjectCars 6 жыл бұрын

Thank you very much my friend for these great words it makes all our hard work doing these videos well worth it please share our channel everywhere you can have a great day

@hasbeengood 6 жыл бұрын

Funny guy! Having all the tools is one thing, thinking to use them outside the box is the true art. You are the master! I just think you're the guy that is never stuck in any situation! Another point for the underdog! This is good stuff.

@SweetProjectCars 6 жыл бұрын

hasbeengood thank you very much we truly appreciate that and you being here with us :)

@tardeliesmagic 6 жыл бұрын

You did this like a BOSS! Love the way you used the mop/buffing machine and that's the best way to do it guys n girls.Great effort Sweet Project Cars

@SweetProjectCars 6 жыл бұрын

Tardeli thank you very much for your great comments and we appreciate you being here with us :)

@bigblueaquarium 6 жыл бұрын

The fact that you have taken the time to go through Amazon UK looking for the required tools is awesome and really, really appreciated. I don't know of another channel who would do this. I owe you another beer buddy. Did I mention this is my favourite car channel?

@SweetProjectCars 6 жыл бұрын

BigBlue we try hard to please as many as we can thank you very much we truly appreciate that and you being here with us :)

@mr.bluegrass9723 5 жыл бұрын

i really enjoy your videos. they are so helpful to the a average person .and i really get a big laugh listening to your Spanish friend.

@Wakeywhodat 6 жыл бұрын

You're the man.. My cars are looking tight, and on a budget. Thank you!

@SweetProjectCars 6 жыл бұрын

Wakey glad we could help thank you very much we truly appreciate that and you being here with us :)

@ke6bnl 6 жыл бұрын

your channel has some real good down to earth legitmate info for the everyday person.

@SweetProjectCars 6 жыл бұрын

Ed thank you very much we truly appreciate that and you being here with us :)

@ogarzabello 6 жыл бұрын

Sweet Project Cars = You're THE MAN, Sir!

@SweetProjectCars 6 жыл бұрын

ogar thank you very much we truly appreciate that and are very glad you are here with us :)

@TheCowgirlNiamh 6 жыл бұрын

You had me going with the new headlight haha

@SweetProjectCars 6 жыл бұрын

I have to joke a bit just to entertain myself sometimes LOL thank you Niamh

@GaryFi 6 жыл бұрын

Me too..😂 that must be you speaking Spanish too huh??

@SweetProjectCars 6 жыл бұрын

we try to share with everyone even in other languages when we can thank you very much we truly appreciate that and are very glad you are here with us :)

@Jasfras1 6 жыл бұрын

Fantastic advice.. It's those little bits of knowledge that are so important. SWEET !

@SweetProjectCars 6 жыл бұрын

Jasfras 1 thank you very much we truly appreciate that and you being here with us :)

@handyman-ir9qu 6 жыл бұрын

My son has a 1970 Nova, the top of the dash looks like a dried up river bed. I would love it if you made a video on restoring a vinyl dash. Keep up with the videos, because of them people think that I actually know something.

@SweetProjectCars 6 жыл бұрын

handy we will see what we can do for you on this dash issue your son is having thank you very much for your great comments and we appreciate you being here with us :)

@TrojanHorse1959 6 жыл бұрын

Great tip and great job of providing links to the tools and materials you used! Thank You!

@SweetProjectCars 6 жыл бұрын

Robert, you are very welcome my friend :)

@Andrew-rb4gs 6 жыл бұрын

That RTV Sealant is great for many jobs. Keep a tube handy, you won't be sorry. Love ur videos. Look forward too more.

@SweetProjectCars 6 жыл бұрын

andrew thank you very much we truly appreciate that and are very glad you are here with us :)

@albertosantiago2171 6 жыл бұрын

SPC hi, i was doing the same exact Project today. With the same idea and same technique. And had the same result,wow. We are on the same page. Keep up the good work and God Bless.😎

@SweetProjectCars 6 жыл бұрын

Alberto great minds think alike lol thank you very much we truly appreciate that and are very glad you are here with us :)

@mohammeda4661 6 жыл бұрын

Just want to say thanks for all the great videos. Congratulations on reaching 100k, hopefully you’ll be hitting 250k in no time. In the north of England we don’t get too much sun, but it’s always raining! Having a old car and all, there’s rust patches. So, I wanna leave a suggestion of doing a video on how to remove rust on body panels, filling sanding and painting. I know there’s lots of videos on KZfaq of other channels doing it but tbh I trust the videos here the most. Evening is honest and cost effective! So yeah, I would really appreciate it if you could, Thank you.

@SweetProjectCars 6 жыл бұрын

we will see what we can do for you my friend ...thanks so much :)

@jimbola77 6 жыл бұрын

thank you partner!!!! you are an angel I have so much moisture, in my plastic headlights and boom u gave me the answer!!! I will perform this asap thank you partner for sharing!!!!!

@SweetProjectCars 6 жыл бұрын

jim we are here to help good people like you :) thank you very much we truly appreciate that and you being here with us :)

@petercrutchley6085 6 жыл бұрын

Excellent information as always. Many thanks for posting..

@SweetProjectCars 6 жыл бұрын

Peter thank you very much we truly appreciate that and you being here with us :)

@kevintobin8554 2 жыл бұрын

very informative, thank you for taking the time to make it

@SweetProjectCars 2 жыл бұрын

Glad you enjoyed it Kevin! Thank you for watching and sharing, have a great weekend my friend. mad Mike the hammer SPC

@stephensmith7465 6 жыл бұрын

New SPC video makes my day.

@SweetProjectCars 6 жыл бұрын

Stephen thank you very much we truly appreciate that and you being here with us :)

@Rampage00769 6 жыл бұрын

I will definitely try the Mothers, already have it. But I only used it for wheels lol. I been sanding these really bad ones starting at 180 and going up to 2000, then polishing compound, and finally waxing. That is my full proof way and has always turned out perfect. But labor intensive. I don't see how just the Mothers can fix these I get with the clear coat peeling etc but I am going to give it a try and hopefully save some time. In the detailing world that's what it's all about, time. Thanks for sharing

@SweetProjectCars 6 жыл бұрын

mother is a wonder polish in our world and you will love the results thank you very much we truly appreciate that and you being here with us :)

@JayJay-ct5tk 6 жыл бұрын

Sweet. Asked for this about a month ago. I haven't done it yet but figured you would make a video about it. Never thought about checking for leaks the way you did. It has been so frigid cold that the moisture in the headlight is frozen. Lol

@SweetProjectCars 6 жыл бұрын

jay glad we could help you my friend :) thank you very much we truly appreciate that and are very glad you are here with us :)

@MrKelso159 6 жыл бұрын

Thanks for doing this video. I have this problem with the drivers blinker light and now I know what to do. Best car videos on youtube if you ask me. Thank you !

@SweetProjectCars 6 жыл бұрын

MrKelso159 thank you again for your great comments it helps the entire channel :)

@HUBBABUBBADOOPYDOOP 6 жыл бұрын

The cause of this is twofold: hurried manufacturing processes, and the cycles of heating & cooling create a vacuum in the case, that draws in humidity (overnight dew, rain). The "pressure equalizer vents" only make it worse. Traffic atmosphere is filthy- exhaust gasses, washer fluid mist, ice melting chemicals mixed with water, aerosolized by tires, equals another awesome SPC video.

@SweetProjectCars 6 жыл бұрын

thanks for the great comment hubba

@mickcoomer9714 6 жыл бұрын

Thank you. Very instructive. Rear light to do.

@SweetProjectCars 6 жыл бұрын

mick thank you very much :)

@rwmagnus 6 жыл бұрын

Amazing you come up with all these tricks. Sweet!

@SweetProjectCars 6 жыл бұрын

Ralph thank you very much we truly appreciate that and are very glad you are here with us :)

@richiearias7526 6 жыл бұрын

Awesome my driver side headlight just started getting moisture in it thank you!

@SweetProjectCars 6 жыл бұрын

Richie there you go now you can repair the problem thank you very much for your great comments and we appreciate you being here with us :)

@halseyballistic 6 жыл бұрын

OutF#*kin'standing instructions for this head save and restoration! Sweet Project Cars Crew is the Sweetest Deal in DIY car care! If you are not a subscriber yet, what the heck are you waiting for?

@SweetProjectCars 6 жыл бұрын

Halsey thank you very much for the support :)

@HUBBABUBBADOOPYDOOP 6 жыл бұрын

Extra credit for the Apple Polishers like me- If the chromed plastic reflector is hazed because of polluted water- Mothers and a soft cloth will clean most of that off too. If it's really FUBAR you can always clean it with isopropyl, then shoot it with light coats of your choice of "chrome" spray paint, and that can be buff polished like any other paint when dry & hardened properly.

@SweetProjectCars 6 жыл бұрын

thanks hubba for the great tips as always

@mindthependulum6245 6 жыл бұрын

It's a good video overall, plenty of useful tips. I'm curious if dumping rubbing alcohol in a headlamp assembly would remove the chrome paint for the reflector dish? Also, if the chrome paint has come off, what would you suggest to restore it? I ask that last part because I had a brand new headlamp assembly in a bench in my garage. I peeled off the paper that protects the bulb holes, but I didn't add bulbs. The ambient moisture in the garage caused fog in it, and when I dumped it out, most of the chrome paint fell right out too.

@SweetProjectCars 6 жыл бұрын

the alcohol does not hurt the light whatsoever you put it in and slosh it around and dump it out... thank you very much, we truly appreciate that and are very glad you are here with us :) as far as the chrome paint you can clean it with rubbing alcohol and then use a plastic chrome paint and then clear it with a good clear coat.

@carylamari6546 5 жыл бұрын

great tips, just wished you showed the finished project, be nice to see the results after all the work to know what kind of results we can expect but thank you for taking the time to show us how you clean them up. I am going to give this a try on my silverado which is filling halfway up with water lol Thanks.

@SweetProjectCars 5 жыл бұрын

Cary Lamari thank you and once you glue them back together they will look brand new and not leak any longer

@dporrasxtremeLS3 6 жыл бұрын

Awesome!!! Great Video! Perfectly edited! Thank you!

@SweetProjectCars 6 жыл бұрын

Davil thank you very much we truly appreciate that and are very glad you are here with us :)

@markg.2501 6 жыл бұрын

Awesome....I'm going to apply the same method to my foggy tail lights......Thanks Man!

@SweetProjectCars 6 жыл бұрын

Mark it will work wonders for them ..thank you very much we truly appreciate that and you being here with us :)

@ChristianGutierrez 6 жыл бұрын

Mine have more water than a swamp it seems, but now I can fix it, thanks!

@SweetProjectCars 6 жыл бұрын

Christian Gutierrez this will cure the water problem for sure thank you very much my friend !!!!! we truly appreciate the great comments :)

@minafady3084 6 жыл бұрын

This is awesome and helpful video..thanks for sharing my friend.

@SweetProjectCars 6 жыл бұрын

mina thank you very much

@jeliarra 6 жыл бұрын

Oh Darlin please! Have you come across a car that's side view mirror has gotten water in it? My mechanic didn't know how to fix it and made it worse trying to fix it. The water was trapped in the mirror (glass), not the housing. As always wonderful video!

@SweetProjectCars 6 жыл бұрын

Once it’s in the mirror glass there’s no fixing that that we have found it will need to be replaced what happens is the seal Is busted on the glass and water seeps in. Thank you very much for the great question have an awesome weekend

@jeliarra 6 жыл бұрын

Ah well. I will take the passengers side apart and make sure that seal isn't doing the same. Thank you for reply!

@Okie-Tom 6 жыл бұрын

Great info. So many neat little tricks! I always enjoy your new videos. What if the leak is where the bulb base twists in? How would you seal that ? Thanks, Tom

@SweetProjectCars 6 жыл бұрын

Tom thank you if it is in the bulb base use this amzn.to/2E01HpY it works everytime

@butchc7650 6 жыл бұрын

Is it possible to fix a star crack in the plastic from a stone , there isn't any holes just cracks. Love the video's , keep it up. Thanks.

@SweetProjectCars 6 жыл бұрын

butch not really a way to fix that, if it is not leaking then i would leave it until you are ready to buy new ... thank you very much we truly appreciate that and you being here with us :)

@erikdale9145 6 жыл бұрын

Snuck the laquer thinner in lol. PROJECT IDEAS what sweet tips do you have from keeping doors freezing shut in winter..post snow, car wash or -30*MN stuff. Other than wiping door jams lol, they freeze as ya know well before those jams are throughly wiped! Great video as always, shared with my groups as this is always an issue even w brand new

@SweetProjectCars 6 жыл бұрын

Erik we use this amzn.to/2CV0n7o and it works awesome :) hope it helps you as well my friend

@erikdale9145 6 жыл бұрын

Sweet Project Cars nice yeah I have that around. ..how are you treating the doors? Spraying Down the jams

@SweetProjectCars 6 жыл бұрын

Erik we spray the door seal mainly all the way around the door 2 times a week when really cold

@schmitty2023 3 жыл бұрын

I was looking at buying some aftermarket headlights for my truck. As a precaution, should I apply the silicone to the outer seam like in 2:52 and let it dry prior to installing them?

@SweetProjectCars 3 жыл бұрын

Yes, use this amzn.to/2DuPmO1 and only this. It is a great precaution to do before installing them. Thanks for the great question. Have a great evening. mad Mike the hammer SPC

@vincentdrago6022 6 жыл бұрын

Your a genius

@SweetProjectCars 6 жыл бұрын

Vincent thank you very much we truly appreciate that and you being here with us :)

@blogger4velo181 6 жыл бұрын

Awesome. Thanks for the tips!

@mikeross58 6 жыл бұрын

Another great video, keep them coming

@SweetProjectCars 6 жыл бұрын

mike thank you very much we truly appreciate that and are very glad you are here with us :)

@rayjones3212 6 жыл бұрын

I can see where this would work for just about anybody. However, I have a 2011 Chrysler Towne & Country with just 1 headlight ass'y which is doing this - every winter - drivers side. In order to remove the headlight ass'y the front bumper must come off. So I will just live with it - for now. If I could remove the headlight ass'y easily, I'd do this in a heartbeat! So if you know of a quick way to remove this headlight ass'y., I'd sure like to know. Love your channel and all fhe tips you provide to all of us. Keep up the good work.

@SweetProjectCars 6 жыл бұрын

Ray, unfortunately, yours is like the newer Cadillacs you have to take the bumper cover off partial to get the light out thank you very much we truly appreciate that and you being here with us :)

@cxlmobileheadlightrestorat7906 5 жыл бұрын

Sweet Project Cars any odeas on how to fix? Or,just not,going to happen at all?

@SweetProjectCars 5 жыл бұрын

CXL Mobile Headlight Restoration please explain as the video shows how to stop water from entering your headlight?

@cxlmobileheadlightrestorat7906 5 жыл бұрын

Sweet Project Cars cant remove,the headlight, anyway there is a quick fix?

@cxlmobileheadlightrestorat7906 5 жыл бұрын

Sweet Project Cars for pouring alcohol in the headlight, and blowing with an air hose, what else can you use instead? Compressed air can?

@1232bluejays 6 жыл бұрын

But will they not just go back to foggy if you don't seal the plastic inside and out? Would a good wax seal them or should I use a spray clear coat?

@SweetProjectCars 6 жыл бұрын

dave houston this is what you want to do kzfaq.info/get/bejne/nqpidq6hntPHn2Q.html

@robwright4398 6 жыл бұрын

Cool fix. Thanks Again

@SweetProjectCars 6 жыл бұрын

Rob Wright thank you very much we try hard to share decent tips :)

@chuckb.5076 6 жыл бұрын

Great Info! Thanks for the video.

@SweetProjectCars 6 жыл бұрын

chuck thank you very much we truly appreciate that and you being here with us :)

@dianasorchids 6 жыл бұрын

Great video. I would use a sandwich bag full of nuts and volts for weights or same or gravel to actually weigh down the light to the lens. 😄💙👍

@SweetProjectCars 6 жыл бұрын

Diana very good idea my friend thanks for sharing this awesome tip :)

@dianasorchids 6 жыл бұрын

Sweet Project Cars Glad to, that is how I made my own pie weights with rice and beans...lol ..$24.00 for 2 back in the day. 😄

@stuartmckendrick4845 6 жыл бұрын

Thanks for the uk links my friend nice touch .

@SweetProjectCars 6 жыл бұрын

Stuart you are welcome thank you very much we truly appreciate that and you being here with us :)

@PaganWizard 5 жыл бұрын

Is it safe to assume that this would also work for tail lenses???

@strangerdanger4212 6 жыл бұрын

Do you know if it’s the same process on glass fog lights with moisture? Thanks for another great video.

@SweetProjectCars 6 жыл бұрын

Stranger, it is exactly the same process my friend ..thanks for asking, great question :)

@strangerdanger4212 6 жыл бұрын

Sweet Project Cars Thank you for another speedy reply. Keep up the great work.

@SweetProjectCars 6 жыл бұрын

you are very welcome my friend :)

@bombasticanimal1853 6 жыл бұрын

I wouldn't have believed it if I hadn't seen it with my own three eyes!

@SweetProjectCars 6 жыл бұрын

Gary we thank you very much for the kind comments and appreciate you being here with us :)

@TedCornish 6 жыл бұрын

Great vid my friend, but how would you do this with plastic covers please

@SweetProjectCars 6 жыл бұрын

cornish these were plastic covers we did? or am I missing something let me know my friend :)

@TedCornish 6 жыл бұрын

Sweet Project Cars sorry my mistake I thought they were glass, its my age mate lol

@SweetProjectCars 6 жыл бұрын

cornish no problem I'm with you on the age thing starting to feel it more everyday UGH !!

@analazcano6475 5 жыл бұрын

I get exited whwn.i hear the motor wjen.clicking on a video, im VISUALLY impeared, hearing the moyor i know im 8n.the right video

@conservativeamerica9655 6 жыл бұрын

That's awesome!! Thanks for sharing!!

@SweetProjectCars 6 жыл бұрын

Conservative American thank you so much for sharing we truly appreciate that and being here with us have a great night again I love your user name

@rayjones3212 5 жыл бұрын

I "wish" my headlights came off that easy. I really don't want to have to "have to" remove all of the front fascia just to get them off. Are you sure I couldn't bring the town & country up to you (Mike) and have you do the job? I need to do a road trip and get away from the house for a few days! Our next BIG road trip will be back to Florida when we pick up our custom-built van RV -- in August of this year!

@SweetProjectCars 5 жыл бұрын

ray my friend i wish we could but we are just so booked

@annamills5074 6 жыл бұрын

Lol you showed the new headlight lens i was like DAYUM you got mega skills......so all lenses Separate like that?

@SweetProjectCars 6 жыл бұрын

Anna thank you and ost all lenses come apart....if not you just re-seal them from the outside

@annamills5074 6 жыл бұрын

Sweet Project Cars awesome thanks

@SweetProjectCars 6 жыл бұрын

anna you are very welcome :)

@hojo70 6 жыл бұрын

Awesome tip, although I feel left somewhat incomplete by not seeing how that headlight turned out after you completely polished and reinstalled it :-)

@SweetProjectCars 6 жыл бұрын

hojo we have done so many headlight videos we did not want to bore people with more of the same sorry my friend :) thank you very much we truly appreciate that and you being here with us :)

@melonmalone6307 6 жыл бұрын

I’ve been having this problem for years

@SweetProjectCars 6 жыл бұрын

Melon now you can sure it :) thanks so much for the great comment

@halseyballistic 6 жыл бұрын

Solved!

@SweetProjectCars 6 жыл бұрын

great reply Halsey

@johndoe-ie1be 6 жыл бұрын

Liked the video, but... You didn't mention the metal clips that held the headlight clam together... Do those need to go back on or meh..?

@SweetProjectCars 6 жыл бұрын

john we try not to do the really small details and insult anyone's intelligence as it is a fine line with doing these videos...but yes you re-assemble the light back to what it originally was before the work commenced thank you very much we truly appreciate that and you being here with us :)

@TheCarnager 6 жыл бұрын

My taillight rusted out around the reverse bulbs housing and all that nasty rust residue is caked in there. Any suggestions for cleaning that out? maybe vinegar?

@SweetProjectCars 6 жыл бұрын

TheCarnager can you send me a pic of it and I can help send to SWEETPROJECTCARS@GMAIL.COM

@KBzPTGT 6 жыл бұрын

You may want to add a comment somewhere that you should NEVER attempt to wipe or clean the chrome reflector. That chrome coating is VERY finicky and wipes right off. I messed up 2 fog light lenses so that's my experience

@SweetProjectCars 6 жыл бұрын

thank you very much for your great comments it is helpful for the entire channel :)

@99BT 6 жыл бұрын

Ive got a 2015 audi s3 and my both my headlights steam up but they not broken leak or anything caps behind tight what can i do

@sim6057138 6 жыл бұрын

tahiR make sure the vents are not clogged

@WatchingMyLifeFlashB 6 жыл бұрын

tahiR, if they steam up, you probably have a pinhole leak somewhere. That is, unless they 'steamed up' straight from the dealership when it was spanking brand new.

@SweetProjectCars 6 жыл бұрын

tahiR there is moisture getting on somehow, you need to seal them up like in the video without taking the lens off and see if that helps thank you very much we truly appreciate that and are very glad you are here with us :)

@fahmianshasi9868 6 жыл бұрын

Where are located? And love your videos amazing stuff

@SweetProjectCars 6 жыл бұрын

we are in Michigan Fahmi we thank you very much for the kind comments and appreciate you being here with us :)

@shannonsisk 5 жыл бұрын

Good tip!

@hcoleman2538 6 жыл бұрын

SPC...I have turned down a few more headlight jobs because the lens seem to have like a hard crust on them...do u have any tips or just keep staying away? Also how to get rid of a burn mark on lens?

@SweetProjectCars 6 жыл бұрын

Harry Coleman harry turn them down for now until you see our video on how to deal with it...thank you my friend :)

@axelbart7470 6 жыл бұрын

You make it look so easy.... thank you 4 sharing, and you as well have a great weekend

@SweetProjectCars 6 жыл бұрын

Axel thank you very much we truly appreciate that and you being here with us :)

@llamedosr7843 6 жыл бұрын

Any tips for bad o2 sensors? Damn expensive to replace.

@SweetProjectCars 6 жыл бұрын

try this we have had great success with it ... on sensors amzn.to/2E1Hnon

@katebeedot6964 5 жыл бұрын

A super duper video, once again!! Congratulations 🎉! I have moist in one headlight and also in two back lights (20 yr old car).Just wondering whether disengaging the headlight will be problematic (it’s a fiat barchetta, scared to ruin something!) THANK YOU, you’re brilliant

@SweetProjectCars 5 жыл бұрын

You can pull the bulbs out spray in some rubbing alcohol let them air dry and put the bulbs back in but I’m sure it will continue to do that until you split the headlights a part

@katebeedot6964 5 жыл бұрын

Hi there, the problematic bit for me is getting the headlight out of its socket, not the cleaning up process which I would definitely prefer to carry out using the full method. Thank you, you're such a breath of fresh air!! @@SweetProjectCars

@katebeedot6964 5 жыл бұрын

@@SweetProjectCars Still have my old request: wish you could show us what you would do to mend plastic bumper cracks, the usual nice present from fellow parking experts! Would you prefer using the mesh and bi component glue after tunneling the crack from the inside, soldering the plastic with mesh or the drilled hole system? I'm for a simple method because bumpers are always cracked again when you live in a big city. And I certainly wouldn't spend the money for a new bumper. Please, please, please...!

@SweetProjectCars 5 жыл бұрын

Kate Beedot can you send us some good pics and we will see what we can do for you :) thanks mike send to SWEETPROJECTCARS@GMAIL.COM

@katebeedot6964 5 жыл бұрын

Of course!! would be very pleased to send you pics of my crazy paved bumper! Please remember one day to illustrate your "plastic bumper crack mending" tricks, I would be elated,THANKS @@SweetProjectCars

@astanisystems 4 жыл бұрын

Hey, does anyone know if you can use bitumen sealant to reseal headlights? I'm unable to buy Morimoto butyl rubber strips or any kinda butyl based product since local shops don't have them, and I'm trying to do this on a tight budget.

@williamweir300 6 жыл бұрын

Awesome great video👍

@SweetProjectCars 6 жыл бұрын

william thank you very much we truly appreciate that and are very glad you are here with us :)

@waatao9856 6 жыл бұрын

Should I use a glue that dry hard or soft?

@SweetProjectCars 6 жыл бұрын

beezy yo this is what you will want amzn.to/2sl5vNW and remember our tools are always in the SHOW MORE of the video description to help everyone out.

@waatao9856 6 жыл бұрын

Sweet Project Cars bro I did a lil test ok let me explain I put water droplets on the outside, and right under the water droplet inside my headlight moisture starts occurring. Note I’m not even wetting the whole headlight just a couple of drops that doesn’t slide off. So it’s not even close to the factory headlight glue so what is happpening? It’s not happening to the other side

@SweetProjectCars 6 жыл бұрын

beezy yo sounds like you have a bad light and will need to split it and reglue or maybe just replace it...hope this helps my friend :)

@waatao9856 6 жыл бұрын

Sweet Project Cars I think it’s just a shit headlight yeah thanks man your vid was helpful have a bless full day sir

@SweetProjectCars 6 жыл бұрын

waa tao your are very welcome

@williamvolkmann8658 6 жыл бұрын

just drill a 1/6" hole in the lowest corner and it will stay dry

@PapaWheelie1 6 жыл бұрын

William Volkmann - yes that works too but 16 inches might be a bit large lol

@SweetProjectCars 6 жыл бұрын

the idea is to keep water out my friend :)

@williamvolkmann8658 6 жыл бұрын

It dose also the heat dries any that is already there

@msv622 6 жыл бұрын

I've drilled a headlights on 2 cars.. work great and stopped blowing bulbs when I took a turn. Both were clunkers but if a nicer car has the same problem I might put it the extra effort with this method

@sidneyjackson-gomez514 6 жыл бұрын

GENIUS!!!

@SweetProjectCars 6 жыл бұрын

sidney thank you very much we truly appreciate that and are very glad you are here with us :)

@conker33350 2 жыл бұрын

Why would we need this to stop happening? Its suppose to be full of blinker fluid no?.

@SweetProjectCars 2 жыл бұрын

LOL, thanks for watching and sharing, we appreciate the sense of humor this morning, made us all laugh! Have a great week my friend. mad Mike the hammer SPC

@conker33350 2 жыл бұрын

@@SweetProjectCars you made me laugh. I thought people were gonna take that seriously. Hahaha let me just leave a sub here I appreciate the response.

@johnarcher8090 6 жыл бұрын

Thank You!!!!!!!

@SweetProjectCars 6 жыл бұрын

John Archer you are very welcome :)

@FrenchValleyAirport 6 жыл бұрын

4:00 You realize in every video "description" is spelled incorrectly.

@SweetProjectCars 6 жыл бұрын

David we knew that after the fact ..we do make a few mistakes here and there thats for sure ..

@mrbottomfeeder 6 жыл бұрын

Awesome Sauce

@SweetProjectCars 6 жыл бұрын

Richard thank you very much for your great comments and we appreciate you being here with us :)

@oldretireddude 6 жыл бұрын

Have you ever repaired a cracked lense?

@SweetProjectCars 6 жыл бұрын

no we have not very hard to do and make it look new ..best is to replace them thank you very much we truly appreciate that and are very glad you are here with us :)

@muhcagriyildirim 6 жыл бұрын

Arkadaş daha videoyu izlemeden beğeniye basmışlar :)

@SweetProjectCars 6 жыл бұрын

çok teşekkür ederim dostum :)

@mikemorales1725 6 жыл бұрын

The MacGyver of car problems.

@SweetProjectCars 6 жыл бұрын

Mike thank you very much we truly appreciate that and you being here with us :)

@alancooper7062 6 жыл бұрын

They are not bulbs they are lamps ! Bulbs go in the garden , lol

@SweetProjectCars 6 жыл бұрын

Alan you are correct thank you very much we truly appreciate that and you being here with us :)

@EGGINFOOLS 6 жыл бұрын

No finished product shot?

@SweetProjectCars 6 жыл бұрын

we figured it was self explanatory and if you do it you will see the awesome results we thank you very much for the kind comments and appreciate you being here with us :)

@EGGINFOOLS 6 жыл бұрын

Sweet Project Cars It is self explanatory. But I'm a nerd! Lol.

@SweetProjectCars 6 жыл бұрын

no problem we just try to leave a bit to the imagination of our great viewers :) thank you for the awesome question and comment it helps the entire channel :)