Mate , I would like to say thank you from Australia I have followed the video and the results comes 100% positive without any issues and the total job was done in 20 min Thank you 👍

I've really been enjoying this project! Just as good as watching Wheeler Dealers! Well done to you and Dan!

Great idea Dan

“Doesn’t look...too chav’d up” (0:36) Love it! And a genuine concern - it’s a fine line between upgrading a car and chaving up a car. Great job here Dan - I’ve been thinking about how to do this for a while, and now I know how! :)

Love the vids, you should try and swap the rear view mirror on your 2016 sport build with the 2020 rear view mirror, looks like it might work

Really i cant thankyou enough for helping me by saving alot of money with the lights , i sent yr video to my group , we are 150 the owner’s of rang rover in saudi arabia , and we do not want to go or deal with some thieves in the maintenance centers ..

Thanks you are the best, hello from Kazakhstan

Nice! I will do this next. I have to replace my AFS motor as my headlight goes limp every few car rides. I have the same colour RRSSC!

I love that you guys use metric for temperature and imperial for everything else. While most places use F for cooking and metric for everything else.

Thanks for another video and how to install rear camera on Range Rover evoque.

Hey tried your way I did it really just used a heat gun on low heat all around pretty easy never had to take anything apart 15 minute job but good video 👍👍👍

He’s a good sprayer 😃

What is your advice if the internal cables coating teared up

Can the LED models from the 2010+ be fitted to older model RR Sports?

18:29 Hmmm, I dunno… I kind of liked it the way it was, but to each his own. Great video!

dan, dan, dan, dan, dan, dan.... this is most we heard you speak....great work both... a lot of flash for little cash...

Is this the same procedure for a 2006 Range Rover Westminster?

Can you do the same video to a Range Rover Sport MY 2014? I have my LEDs go out and DRL blinks 6x upon starting the car then it goes off. thank you.

Step 1! Put something on your workbench to protect the lens of your very expensive headlight!

How many coats of primer & coasts of the black paint?

Did somebody KNOW how to adjust the head ligth whit AFS system??? 2006 range rover my head light its pointing down insted of pointing straigth!!!!

Can we do the same for the rear led ones?

Hi Stupid question I’m sure but what sort of silicone are you using to re attach the lens pls?

Hi guys could you some more videos on the freelander 2 I’m thinking of buying one but idk what to look out for

Can led bulbs replace all the bulbs in an 06 res l320

The only workshop with a fitted oven in it.

Interesting that you heated the headlights with the ballast packs still in place bearing in mind just how much those items cost to replace, was that a time constraint or did you not wish to remove them?

I’m noticing flickering on my lights and much dimmer than they used to be. 2011 sport supercharged. Do you have a video for this fix?

Good morning from EU! Because our RRS1 are getting older and older there is a need for headlight glasses or a treat for them (polishing). Maybe there are no faded out glasses in the UK (due to lack of UV) but in EU esp. the south part this problem is really cooking up! You have made an excellent video about opening die headlight and painting die 'guts'... ...why not putting a new glas on...? BTW: I love your comments with British humour!

Any plans to source and stock repllacement lens for the 05 to 09 sport please. Have no problem splitting the lamp but cant find replacement lenses anywhere. Am sure there would be a market for them as all the ones I see are faded and misted now

Quick question… could you not use a heat gun on the adhesive?… I’m trying to restore an 07 sport and I’m a little scared of putting the headlight in the oven considering it’s near 1k if I mess anything up

For those of us that have the newer variant, I just did headlight lenses on my 2011 RR Sport. Sorry, no video.... They are a royal pain in the arse to remove from the assembly. Basically you must Dremel them off and use vice grips to tear the remaining pieces out of the groves. They were siliconed in place which is why it is so difficult to remove. Heating them like they do in this video does help a lot. I ended up heating each lamp about 5 times while pulling chunks of lens out of the housing. After removal, clean it as best you can and use butyl tape like they did in this video. Heat it up awhile, let it cool and install! I was shocked how well the butyl worked too, 6 months and countless car washes and storms later and still no lens fogging. It is doable on the newer ones, just gotta have patience!

You could paint the grill black to match

Have you attempted this with the facelift headlights (2010-2013?) I can’t seem to get the sealant apart regardless of heat.

Did you fix the non working HID before taking it to MOT?

Do 2010 l320’s require going in the oven also?

What would you charge to do the headlights on my 07 RRS, if I come up to yours

Can this be done by just using a Heat Gun? I don't wist to use the oven

I used a heat gun to soften the glue instead of the oven FYI

i bet this headlights gona mist from inside after first wash 😂😂 silicon masters 😂😂😂😂

Enjoyed the video but those headlights will leak or stream up! You can already see it.

What year truck these lights come out of?

2:58 LMFAO!!!

You don't mix silicone and the oem glue. When warm smooth out glue in channel. Off the sides and pushed to the bottom. If you need to fill in a bit use a donor lights glue or use some windshield butyl. You can use silicone if channel is completely clean. I'll use that for lenses that i did a lens swap by cutting lens off a urethane or silicone based glue that are not affected by heat. I split and repair a lot of lights. Just a fyi from my experience.

Couldn't you use a heat gun and slowly go around the seam and separate it little by little?

Dan Dan Man

Put a sheet or old towel on the bench FFS

I will replace the lens

Really liked this video guys, just wondering if painting the headlights is worth a potential divorce when she see’s what I am using the oven for😂🙈

Hi, I'm wondering do take jobs on for customers.? Or is your youtube vids just on How to do things? If you do take jobs on? How much would it cost for pair of headlights to be restored? Thanks.

You would be better of using a camera tripod when filming in side

Can you just use a heat gun to remove the lens rather than put in oven?... Cheesr

.