Hi mate, first of all thanks for your comments and your questions. Happy to tell you the way I do it even though I have used multiple different products from different brands. I don't get any extra support from any brand so my advice is pure haha. 😅 First of all, I always sand the tiles to scratch the surface so the primer stick into it, then clean them with a cloth and some Metho or Thinners to remove any dust. I use a good quality water base acrylic sealer over the tiles and let it dry for a day. Then the area is ready to be treated like any other wall basically. I apply 2 coats of sealer with grit (it creates the texture of a 80 grit sand paper. The size of the grit will determine the thickness of the product, usually 2-3 mm. I did the same process on the floor. The transition between Tadelakt and micro is not a problem. I finished the walls first, then start the micro cement. Once the micro is finish, create a "bridge" between the two making a small "grout" so the silicone can adhere properly so any water pooling on the corners doesn't get into wall or floor. So far my other bathroom at home was finished 4 years ago and still no problems at all. Hope I did answer all your questions and thanks again. 😉

Thank you 😉. You should watch my video of How to apply Venetian Plater step by step, and give it a try 👍 I’ve seen your work and you got it on you 😉. Thanks again for your support, it helps a lot.

Hi!! I have created a free online course for those of you interested about the full application of Venetian Plaster. I would highly appreciate if you could help with a positive review on Google and KZfaq. Here are the links: Online course: kzfaq.info/sun/PLrRsD8ciBC9yTIBnR8Wz28GBhMDbpkZ8D Google: g.page/r/CbY5bcYAfkfqEB0/review Please let me know in the comments if you enjoyed the course! Thanks

@@valerieann2751 hi there. They are different finishes with different look. Microcement is the only product suited for floors, although it can also be applied over walls we like better the Tadelakt finish. The ceilings are finished in Venetian Plaster, again different finish 😉

Hello my friend. Thanks for your comment! I used Tadelakt because I like the finish after applying water base polyurethane sealer. I’ve tried marmorino with 2pack sealer but leave strike marks and “burns” the product removing its shine finish. Some people would use different kinds of natural wax to improve water resistance but they don’t last long, with modern shower gels and hair products it damages rather quick, hence-why I chose polyurethane sealer for shower walls 😉. I hope I could help with your question. Have a nice day and thanks again

Glad to see that someone recognize the difference 😉. It is Tadelakt mate, in powder form mixed with water. Venetian plaster turned out to be a pretty good marketing sales point

This version of tadelakt is European and therefore a glorified Venetian plaster tadelakt good spot

@@saren6538 Need to clarify, ceiling was done in Venetian plaster, walls in Tadelak and floor in Microcement. Thanks again

Great job. Thank you for sharing. I like the curved shower head. Can you share the brand and model?

@@christopherharris21 thanks, I really appreciate your comment. I will try to find out the model, however we got it from Highgrove bathrooms 😉👍

Žao mi je što se tako osećate, siguran sam da je vaše vreme veoma dragoceno. Međutim, trebali biste znati da ovo nije tutorial video. Molimo provjerite moj kanal ako želite vidjeti strmo po strmo sa opširnijim objašnjenjima.

Hi Saren, thanks for your comment! You are wright and wrong at the same time! 😉 This is not Venetian Plaster, it should be called Moroccan Plaster. However, you are right, this is not the original 10mm thick solid plaster used over timber or river rocks as per ancient times. Now we use plasterboard which is 12mm thick

@@venetianplaster no its not my man, its a venetian plaster tadelakt style. yes this fake tadelakt is hydraulic lime like the orignal, but the orignal doesnt have marble dust and additives mixed to it. no the original is not used over plasterboard or wood. it needs to be a lime render coat and then 8-10mm thick tadelakt on top. The italians and germans jumped on the tadelakt name and called it tadelakt. its nothing in anyway shape or form a representation of the original. what i love about the real is the fissures and little cracks all over the surface and the smooth and beautiful shiny and feels like skin (no marmorino chatter lines or pin holes) surface. Also real tadelakt is a render (almost like a sand and cement weight) consistency a fake is a marmorino consistency (a thin frail lime coats).

Your point is pretty much my point as well. Before I keep writing, I have to say that I am a painter decorator who has used lime base products since 2002. I am not a chemist to know the exact composition of materials but I never said Tadelakt has marble dust in it, that’s Marmorino, Grassello and others high polished finishes. I am an applicator who name the products from what companies name them and follow the instructions. Not many things nowadays are the same as before, not even paint itself. Materials change and improve to adapt to new times and new bulding regulations. I would love to hear where you come from and what’s your knowledge and experience with this products. This is a big community where people can learn and share. No need to get rude with nasty comments if you believe otherwise. Thanks!