👉 BROKEN Saab 9-3 Rear Shock Mount FIXINGS 🙁: kzfaq.info/get/bejne/d7qXdsaAxqu6j30.htmlsi=QfRodK1Hoxj4Y8nv

You speak very clearly and comprehensively, with a solid vocabulary, refreshing!! (LOADS of youtubers stutter with "umms and errrrrs" half their videos!!)

You saved me on one car with the CV quick-boot tutorial, and another with this top mount test. Cheers!

Really great information- I replaced my insignias top mounts with non GM mounts and had knocking over bumps, replaced again with GM Mounts (about £10 each extra) and no more knocks! I couldn’t believe it, but there is very slight up and down movement on the non GM bearing which was causing the noise ! Only buy OEM top mounts folks !!

Thank you, you include all the relevant information for a novice and make things simple to understand, subscribed thanks!

Useful. Going to check this tomorrow as I’ve started having a knocking. This channel is a must follow for any Saab owner!

hey! just wanna say dude keep up the great work! pls do more saab vids 😊 thx to u my 2003 93 with over 300k km on the clock is still alive! just got it thru the MOT after 2 months of trying but your vids and detailed guides i could fix most of my problems for cheap and myself!! again! thx a lot and keep up the great work!😁

Lots of good stuff here. I haven't seen another youtuber cover this particular nspection. Thank you Cyd.

Most helpful video out there. Thank you. Been hunting and replacing suspension parts for years. It's very clearly the struts.

Thanks for making this video. Now I know exactly what I need to fix on my car.

Thanks so much for the clear information on strut mounts! I was looking exactly fro that content.

Thanks for this video mate, and your others, I have been watching them since buying a convertible 9-3 which I found out yesterday leaks like a sieve.

This helped a great deal! Thank you so much!! Explained very well

Excellent tutorial mate 👍🏼 exactly describes the issue I'm having.

Great information. Been looking into replacing my suspension system since im at the 127k miles

Very good tutorial. Thank you!

Many thanks for great portion of knowledge!

Nice video, was listening very closely, I have recently had both front struts replaced including coil springs and top mounts, but since my garage replaced them (I supplied the parts) It has developed a knocking noise on a certain situation only, such as manoeuvring my car out of my drive onto the road, there is a hump between my drive and road, when I reverse out and the rear wheels have gone down the other side of the hump I get a 'Clunk' sound as I turn the steering to get onto the road, now this can happen going in reverse or forward over the same small hump, but no clunks at all when driving normally, only when manoeuvring over this hump or somewhere where the same situation occurs! Now the only thing I can assume is that when I assembled the parts to make-up the strut assembly, I decided not to torque down the centre retaining nut where the shock absorber rod goes through the top mount, so left a note with the struts to inform the mechanics that it will need to be torqued down, but I am beginning to think that maybe they've forgot to torque down the nuts and that's why it only makes a clunk when going over a hump where the rear wheels are down the hump and the front suspension is being unloaded as the rear of the car goes down causing movement at the top mount ! What do you think ? it could be something else, but it's quite a solid sounding clunk ! it's definitely from the front suspension and getting a little louder week by week ! The problem here is that I have a Volvo C70ii 2011, and the top nut is underneath a thick solid plastic cover preventing access to the centre nut to check for tightness, so was thinking of cutting a hole in the plastic cover to access the centre nut, rather than having to undo everything from underneath to get to the nut ! Any advice or ideas would be appreciated please.

Nice to see you back doing some videos on the Saab 9-3 2.0T looking forward to the next instalment 👌🏻😜

Great video. And great colors.

Very good explanation, thank you!

Very nice and explained thank you

Very informative and helpful,.

Great video. Thanks so much.

Great video. I appreciate the small video clips that shows "if it does this = bad"

Great tutorial I believe this is my issue. You covered all the important stuff. My issue occurs over the very small bumps in the road and I had originally thought it was bad tires due to the ribs on the freeway. Would a bad strut cause any of these similar issues? Also noticed that my 2 month old control arms failed... would a bad shock top cause rapid wear of control arms?

I get knocking at the front whenever I use Sachs dampers from ECP at the front - three different vehicles (Skoda, Audi, Renault). In each case the knocking started within a year or so, and not huge mileage (less than 20K IIRC). With the Renault, the damper function was also significantly impaired - on sharp turns the outer front corner dipped horribly. I contacted Sachs and they assured me that they ECP do sell genuine Sachs parts. All the dampers were bought 2016-2020. All balljoints and bushes were fine on all three vehicles. I switched to using KYB dampers for all vehicles and I've had no further problems, even after high mileage and rough roads - and I love the ride!! I've also previously had no problems with OEM dampers from VW. I've had no trouble with Sachs clutches and DMFs. Anyway, I've posted this in case it helps anyone here with knocking that's not caused by the top mount.

Thanks a lot boss , you helped me much 👍😊😊😎😇

Very informative. We had both front suspension struts, springs and top mounts replaced 10 months ago on our 2007 SEAT Alhambra. We've done 5000 miles of normal road driving since then, car developed knocking noise a few weeks ago, took it back to the garage that did the work and they said one of the top mounts has broken. They are going to replace it for free, but any ideas why it could have broken so soon? When they did the suspension repairs some of the exact parts (springs and bushes) were no longer available so alternative parts were recommended by parts supplier and fitted.

great vid, cheers

Good information, thanks

Had a pinging noise when locking steering wheel and wasnt sure what it was ? Shock bearing was seized thanks for the explanation 👍

Valuable discussion..all the more so because of the road network condition and increased mileages as the market delays new car purchase.

Thanks for sharing 👍

great video

Brilliant video thank you I have just started hearing a twang bong noice very intermittent at the moment on my mk5 golf R32 2006 and going to ask the vw garage there advice Thank you

YOUR THE BEST

Good video

Brilliant thank you

Hello Cyd, any tips & tricks regarding the engine mounts, preferably for a B284

Thanks a lot bro

Brilliant representation

Thanks for this video Cyd, I've got a clunking sound when turning the steering wheel left to right, albeit only noticeable when stationary. More notably, i get steering wheel wobble when slowing to a halt or travelling on a less-than-perfectly-smooth road. Is this a possible symptom of the issue you raise with the top mount?

Great tutorial! You explained the strut noise on my car exactly! Thank you.

Hello Cud, Thanks. Is it true that ANY movement of the top nut in the retainer assembly warrants replacement? From my understanding on my Mercedes e350 AWD, there normally should be some small visible movement as the strut cycles. I have a horrible strut knocking sound accompanied by symptoms of worn out shock absorbers , Sachs. The shocks have only 30k miles on them so I really need to rule out any other possible sources. I replaced the top mount and the knocking persists as well as a modest amount of movement within the top mount. Appreciate any update insights you may have. Mike

Excellent tutorial Cyd!

Hello, I've recently been having an issue with my 2008 saab 9-3 2.0t with the radio not illuminating or playing any sound, that started two days before my battery was completely dead I had the battery recharged and checked the alternator both were good, I just saw your video to check the terminals under the battery. However I don't know how that would effect the radio please help me trouble shoot this issue please. Have a wonderful day and I'm happy I found your channel very informative and happy to learn more about my vehicle.

Thank you

Would it make rattling noise when going slowly (up to 30mph) over pitted, scored road? It sounds like rattling coming from the top. Bottom of the suspension have been checked, new d bushes fitted and links, wishbones got no play and that. Just that subtle rattle somewhere - sound more like some plastik not metal on metal. Really hard to describe.

Will the top mount on Audi a6 c6 knock if is worn out? Or would it be the strut most likely?

Oh my god I've been chasing down a suspension problem in my car for YEARS. What you describe about the ripples in the pavement from the mount not being connected is PRECISELY what I feel. It's like the shock absorber is solid and is unable to iron out the micro-ripples in even very very very smooth tarmac. It presents like a small wheel balance issue, except it's frequency is not related to speed and can be felt even at very low speeds (10 or 20mph). it just makes the car feel like a crummy ride, instead of the luxury car it should be. and it's because some knucklehead at the shop didn't replace the fucking shock mounts, when I thought they had, many many years ago when I first tried to solve this with new shock absorbers! Holy shit. Thank you so much for this, I came across your video while doing my research as I've had growing suspicion about the car not feeling right, and that something in the shock assembly is just not correct. I will be inspecting them and hopefully replacing them shortly. Cheers!

Can squeaking from the front suspension when going over speed bumps be caused by bad top mounts?

After replacing my strut mounts and bearings due to front knocking on my 2006 9-3 and still having knocking, I was at a loss … then one afternoon it got so bad I had to investigate again. Well, all I can say is don’t purchase the cheapest item. I replaced both side with a much better mount and bearing combination and no more knocking. Ever since I purchased the car from an elderly couple it has always had a knock. Problem solved!

First time watcher and on the c4 grand Picasso u can’t see the top mount to shake the shell up and down

If i have visible movement in the topmount when bouncing the car. Is it 100% i need new top mounts? I have a knocking sound in my newly bought Saab 9-3X. Previous owner recently changed the top mounts. But maybe he used bad cheap parts and its allready broken again. I think he used Ridex....

ba bump noise is such a general term could be anything in your suspension system u have to physically check everything.. use your arms, eyes, and a crowbar

My 2018 Lexus NX300 with macpherson strut apparently have to replace the Bering, went to dealer 3 times without clunking noise problem solved

One of the bolts sheared off my 93 and the new top mount didn't come with any bolts, do you happen to know what bolt / size / type

Great school

Informative video great stuff Cyd! I had a weird noise when going over bumps, I read it could be the bearings so due to the age of my strut assembly I put together a brand new strut inc bearings mounts, protective sleeve. I made a video of the process if it helps anyone out :)

I recently purchased a used car and almost immediately noticed there was a creaking sound as well as quiet clunking from the front of the car when driving. Brought it back to the dealership and they said it was the struts, and that they replaced both. The creaking went away but then there was a new sound.. a loud bang near the front right of the car, only when going over a speed bump. It honestly feels like every time I go over a speed bump, an iron fist comes out of the ground and punches the front right of the frame. Wild, I know. The sound is loud and scares the crap out of me every time I go over a speed bump. Took it back to the dealership and they said, "oh, there were some loose bolts. We toghtened them, should fix it". I went over a speed bump and BANG! The same iron fist punching sound. Never heard something so loud and am not sure what could be causing it. Any help or advice would be greatly appreciated.. im so frustrated at this point.. and terrified to drive my own car.. that I just bought!

Mine squeaks when turning at low speeds

I have honda civic fn2 and something is knocking while driving on concrete roads or parkings. Been in 3 garages already and no one can say why and what is knocking. I will give it a chance and change bearing and mounting

I live in America, my state doesnt check anything but smog. I wonder how in depth your Australian government peoples check. Are they really checking this part?

My Uncle change in Iran, something scoffer.

Thanks having a nightmare with my car…mechanics let me down!!

Dont buy Sachs top mounts, build quality is bad, they dont come with set of new bolts, and guess what you can't use the old one's because its not the same size, and 2 of 3 nuts of the mount didn't want to tighten to the car instead they were spinning endlessly.

Jesus, the editing in this is horrible.. Way to many frame jumps, very uncomfortable to watch.

Buy a fucking Toyota!