Now that I see this video I understand much better, normally in any workshop they would tell you that it is the transmission so far I have been able to save 2 cars just by changing the valve body

Yo appreciate all your videos but this one right here saved me $6,500 🙌🏼✨️🔥🔥🔥🔥

Wow this is exactly what I was looking for thank you for the video 🙏🏼

Yup! My car's transmission valve body has failed I can assure after watching this video. But I'm also happy cuz perhaps I don't have to fix/rebuild the whole transmission. Just get this fixed or changed

Man your a goat , spent weeks trying to figure out why my challenger kept telling me to put in park every time i reverse . Or it would sometimes just not move at all in reverse

This is exactly what’s going on with my Jeep Grand Cherokee L 2021. When I accelerate from a stop it goes smoothly the problem starts when I decelerate to 40 or below and try to accelerate again. I step on the gas and there is a delay and then the RPMs spike up and it goes. I also notice it stays in high gear even at slow speeds. The dealer ship is looking at it now. But yeah great video it explains a lot

Seriously happy that i found this video. I've been looking for any kind of information on the issues I've been having. Every symptom you just explained is exactly what I'm dealing with. Thank you so much, and i just subscribed.

Excellent advice. Thanks for your time and efforts to educate through your video

I'm experiencing all those symptoms. I bought a refurbished one, and will take the van to the mechanic next week. The mechanic quoted me $325 just to install it. I paid $157 for the part.

Hey thanks for the video , i have a 2000 ford excursion with 7.3 diesel and the 4r100 , i can drive my truck no prob everyday, but when i tow my boat i try to pull up the ramp and its a huge delay when i put it in drive , it either wont go into drive lt is delayed and all i get is rpm , i have a dieselsite refurb valve body just sitting from my old truck and im wondering if its worth a try . the valve body should control the line pressure when u shift to drive right , i always feel a little bump right away on any of my trans that were rebuilt. Thanks for any imput!

Man u just simply broke it down the way it is happening on my s430 with only 23k miles and I just dropped it at Mercedes-Benz for a whopping $4000 job , I would like to know where are u located!??????

Yep got another VB might swap it out was having a minor issue with a 4r70w it seems like it goes into neutral when it shifts down from O\D into 3rd at cruising speed, Also feel a grinding noise in 1st just randomly but only at low speeds happens sometimes it does take time to fill and drain drums to make shifts just seem like it's shifting late.

I really wish I found this sooner. My car had been doing EXACTLY this and I'd been explaining the symptoms to my service advisor for months. MONTHS. My car wasn't throwing any codes or anything. So they didn't know. My car would shift and upon trying to maintain speed, it would not move. This happened after about 40min of driving consistent highway speeds. Unfortunately, found out what the cause was only after trans fluid started leaking upon my last test drive shortly after they claimed they fixed the issue. At some point coming home, it refused to be put into reverse. Had to push my car into the driveway. Ford's really been hitting some of my nerves lately. Thing is, they put in a brand new transmission for me because the last one was bad as well. And for the valve body to go out with only a little over 12k miles on it ???? And Ford (factory not the dealership) is expecting me to pay for it when they themselves built me a brand new transmission to be put into my car. So idk. Trying to get rid of it after this and just get something else 😭

Excellent video we appreciate your time and effort on sharing knowledge 👍

I have an issue with my 2014 Nissan Sentra it slips bad at low rpms but at high rpms runs fine and doesn’t make a noise as you said in the video and also is throwing code for the valve body

What is the approximate cost to have this replaced by a mechanic?

Will the valve body cause reverse gear to delay a bit before to engage ?

I keep getting a code for automatic transmission fluid temp sensor and it’s not shifting up gears. I was told it’s the valve body. Does that sound right? It drives just creeps in first gear like 5mph and slipped into neutral once, we parked it. Thank you!

Does 6I80 trans have to be grounded to the chassis for it to work the TCM ?

If the trans fluid is contaminated and if trans has debris present does that mean I need a whole transmission? Currently waiting on warranty to approve work on my 21 scat pack 😢

Valve body giving problems but the truck is at 190k miles and never changed fluid. Should I service the transmission regardless or leave it alone?

On a Ford, there are components that can be replaced without removal of the valve body. There are solenoids and even a TFT (transmission fluid temperature-sensor) that is attached with clips or bolts to the valve body above the filter. If you have the time the valve body can be refurbished with new components (gasket, check balls). The little synthetic balls can actually wear out over time and mileage. FordTechMakuloco has great videos on this.

My 2020 Ford Expedition had this issue. Thank god it was covered under warranty.

What kind of knocking noise for the 1st point?

Honestly as soon as a transmission slips the clutch pack is going to be burnt, there’s no un-burning it. If it slips once it’ll slip worse over time. Sure replacing the valve body may put a band aid on the issue for a couple weeks or months but you will be rebuilding that transmission within the year.

Thank you, God bless you for sharing

What if i change all the transmission shift solenoids on the valve body will it be OK. Or i have to buy the new valvebody?

I'll let you know when I figure it out,but, this 2006 Toy U140e fresh rebuild air checks solid, but cold line pressure at idle and stall is below spec and gets worse after warm up. 2-3 flare. Reman VB TransGo Upgrades. Suspect SL1 and 2 solenoids even though voltages look good on road test. Wish me luck !

You are a genius! Brilliant video!

Thanks for the clear explanation

Recently replaced my valve body on my Infiniti Q 50 and I noticed it makes a rattling noise. I can hear the little beads inside rattle does that mean it needs more transmission fluid because I followed the steps per the manufacture any suggestions? Also it’s a re manufacture and it also gave me the same code as the original valve body p0720

what im confused about is, we just changed transmissions and we arent getting any fault codes or anything and first and reverse gear feel amazing, but no 2nd or 3rd, it doesnt even attempt to shift into 2nd just stays in first, so im thinking its either the transmission pressure solenoid that we used out of our old trans of the valve body were gonna try the solenoids first

Question for top 5 auto repairs, is the pressure control solenoid C part of the valve body ? Can dirty transmission fluid or clogged transmission filter cause the symptoms you mentioned on your video?

What about like a power jerk ? My car drives good then sometimes it shifts and its like it loses power then it drives regularly

Thanks. My daughter got the code so we'll check fluid first.

Can someone here help me diagnose my vehicle. I am contemplating on replacing the whole transmission but i dont want to commit into a repair that may only cost to replace just a valve body. I have a 2005 nissan pathfinder v6 5 speed automatic. How the problem started: the problem started when a friend of mine tried parking backwards at a pretty steep hill and of course he let go of the brakes so it moved forward and he pressed on the gas fearing it might roll in to the ditch, the car jerked up the hill in reverse pretty hard. The reverse issue got worse over the days . I had no other choice as we were out camping in a pretty unknow place. I did a trans flush at a place near our camp but didnt fixe the issue. The reverse issue got worse now, before it took 2.5k-3k rpm until the reverse catches and engages now it takes 4-5k rpm till it catches. There are no codes showing, i drove the vehicle about 500km back home and it had no issues driving. It was just the reverse. Being the problem. I also noticed that when i use reverse when the car is cold, the reverse engages at lower rpm although its still higher than normal. The transmission oil is still red and i did smell it when i arrived home and it didnt smell burnt or anything, the car also drived pretty well when i was driving that 500km back. Another thing i notice is that when i am manualy shifting from 2 to 1, it doesnt go to 1? I am just hoping someone could help me diagnose the problem. I tried reseting the tcm by removing the battery for 20-30min and it didnt fix it. The only thing I think that vould be the problem is the valve body or worn down clutch packs. I was thinking of the valve body as the problem more as the transmission oil does smell burnt and looks ok but im also thinking that a vode would show up if there was something wrong with the valve body. If anyone can help me diagnose this please let me know. You can ask me any questions you like about the car

Super helpful video all the right information condensed perfectly

I have these symptoms but my rpms won't go over 2.5k rpms (they do NOT spike) what could this be?? I need help

Hi sir I have a problem on my Volvo XC90 2010 3.2L . Transmission slips on 1 speed .. i want you fix it if you in the USA I am in Tennessee

Will the transmission shutter if bad?

Will transmission valve body broken trigger a check engine light? Thnx.

Nice video thanks for sharing. I have question. My toyota noah 2009 ZRR70 chassis automatic transmission Japan car. About 3 months ago it started doing the following. When the car is on break on a traffic and when releasing the break and want to move by pressing the gas pedal the first gear is like it slips and grabs the clutch. its a half second fraction. then is moves to second gear but i feel like it goes too soon to the second and the car trills. And now the check engine light is on. The scan show P2763 code error. The car mechanic opened and removed the transmission oil. Check the solenoid valve and all are good working. What can be the problem. Automatic shifting from 3 4 5 are smooth

What about when your going from 1st but doesn’t want to shift to 2nd it hits rev limiter can that be valve body issue ?

Is P0735 a sign of a bad valve body?

hi. I have issue with cvt civic, car/engine is shaking during shifting to D or R only. no other issue such as delay or rpm, etc. please advise. thanks

My friend told me that is 2006 Chrysler 300 automatic gear only selected 1, 2 and 3, other gears aren't working. I also heard that gear oil was leaking slightly however that oil leakage have been fixed. Unfortunately, the gear problem still continues. Please, what could be responsible for such a problem and how should it be fixed?

I have a 66RFE transmission in my Ram 2500, getting slipping on the 5th gear, hard shifts and erating shifting. Replaced solenoid pack and the two speed sensors and pressure sensor. What could I look for on the valve body to try rule out that as the issue. Couldn't see any sign of damage on the body when replacing the solenoid pack so it might be a blockage in the channels perhaps?

What are your thoughts on remanufactured valve bodys?.. i have a 2017 Lancer SEL with a P2719 fault (control sol D)... i have 140k miles and am really kicking myself now that ive looked into it. I bought the car new andd have notice the shuddering intermittently since it wass around 50k miles.. but i just thought it had a fuel pump issue (usually when i was parked on an incline).. that eventually turned into the car jerking forward when leaving stop signs then turned into delayed engagements when shifting into D or R... then days later turned into completely failing to engage. -ive replaced both filters -replaced fluid with Mitsubishi F4 fluid itll seem fine for a few minutes and then go into limp mode again. I believe I have the JF016E valve body.. the same one that Nissan had a huge recall for. Any thoughts would be appreciated.

Will the O/D warning sign flicker as well?

My 2004 pathfinder has a delayed shift with a kick only when i put D,,,,,,,,,,,but once D is on all is fine,,,,,,,,,,it doesn’t delay or kick on any other gear,,,only D,,,,,,,Any idea.?

So my 2016 Ram 1500 has a delay I. Shifting, and then on the high I got a message on my dashboard about “Service Transmission, do not put it in park until reached desired location” on my way to take it to the dealership the “trailer brake” light came on, plus the check shifter message. Would these symptoms fall under the Valve body as well?

Hey when the car miss shift due to the valve body can that cause a burning smell. I assume because of the clutches?

How about stuck in neutral from startup? I have to rev mine to 3k rpm’s for it to engage

You just made every mechanic i went to sound like a idiot🤯

Hello, I have an Elantra 2015 1.8L, in my case when the transmision is cold, I put it in drive and it needs a couple of seconds to engage 1st gear and with a little ckick. No issues while driving it, shifts would go smoth from 1st to 6th, up & down with no slipping not issues at all. Then I turn the engine off, after five minutes transmission will not engage 1st gear niether 2nd using manual mode, so I need to let the tramnsmisson to cold down for at least 3 hours, then I would be able to run the car again. Already clean the valves, oil is new, no improvements. Do you think is a mechanical issue, or some valve is failing when hot? thanks in advance for looking at it

2008 f150 4.2 2wd drives fine till it warms up the it delayed shift from park to drive or let off gas and then excelorate delayed engage . What it that ? I just had it rebuilt and changed neutral safety switch drive silinoid the tcc ecp new torque converter new clutch drum

I have a A750F in a 4runner with very weak reverse, revs high in reverse. Works a little in reverse in 4 lo., but going forward works fine. Fluid was old and burnt, but now changed and clean. Would this be a valve body or clutches? thanks

Can i swab valve body nissan fuga vq25de v6 2006 to vq35de v6 2007

I have a 2012 jeep patriot and it makes like a whining sound and I think my transmission fluid is low so I took it to auto zone and they said it was good but that if I wanted I could add a bit more so I didn’t at the time but I finally added more today and it seemed to help a bit until my engine light went on then I went to auto zone and it read code 770 and something about solenoid B getting stuck..so I talk to a mechanic so he should be a me to take a look soon

Great vid, thanks alot

You the best man

How can I tell if I need a new transmission or valve body ?

I changed my valve body and now my car won’t start. Plugged the old one and it turns on. Any ideas?

Bro my truck is in the shop now apparently due to this reason. May I get yoyr opinion? Brand new 2022 gmc sierra denali. And this happened. Truck is currently in the shop getting fixed. Good thing I still have warranty. I've been thinking. I'm going to trade it in once they fix it. Think about trading in for the 2023 tundra. What are yoyr thoughts?

Thank you!

Im driving like 1 to 2 kilometers with my chevy cruz and the transmission is like disconnected to the engine and it is just revving without reaction from both engine and transmission, can you suggest that it is the valve body failure already? I heard a loud like pressure noise coming from the transmission while im driving before that happened,

Dealership is telling me i need a new valve body. $4700. But I never had any of the issues mentioned here. Car just wouldnt shift into R one day. No prior noises or issues

My 2018 ford 250 shifts into third rear end locks up and it down shift back to second my mechanic says transmission is bad could be the valve body

How about if my transmission won’t shift into 2nd or 3rd gear

How can i determine whether or not my clutch is bad or if its the valve body

I just replaced the valve body and it’s not wanting to hold its code to set it up to program it want accelerate or reverse I’m at lose I Beg for any suggestions now it was a refurbished TCM valve body it came complete with sylenoids

Can I clean valve body on th400 myself??? Pls help

🙏🏾

why they dont put a transmission fluid sensor in most cars

Can be repair?

I’m hoping this is my last problem before I try to get another vehicle

The clutches inside the the transmission do the exact same.

pilipino po kau😊😊😊

I like your face. My 2000 Toyota sienna stops and move, I can not take it home now I think it is the valve body

can adding a transmission fluid cooler cause the valve body to have issues?

i have a 2007 Nissan Armada Runs, Shifts, Drives perfect... the issue i'm having is the Tranmission heats up.. top of the safe Zone.. no shifting issues, No Codes, No Slipping, No Noises... only other issue is a slight delay going from Park to Drive which isn't a big deal but the temp is! ... Valve Body???

Is it my valve body that has failed, or the whole transmission is failed? I can put it into drive and drive straight with no issue. However, when I begin a turn, even at a low speed, I hear a clunking. It sounds like it has a broken tooth. Unsure if it's a broken gear or not. The sound is in the transmission itself, and I can feel each clunk shake me in the drivers seat. No check engine codes.

My car doesn't shift gears up or down in uphill. Is it a symptom of faulty valve body?

When my Toyota Camry is on for long time the reverse won’t work

I have a issues of valve body

Bro if y have a shop , drop the address

I have A Qx70 2017 that have valve body problem .dude asked 3k to fix it

Mercedes benz gave me a bill for 3,000 + for this issue

All this symptom ...better off getting a new or rebuild transmission.

I have the same problem.the mechanic I ask 3k to fix it

👍🏾😎

I have a Ford ranger XLT 3.2L diesel and i am experiencing a harsh engagement and someone advised me change the valve body, can i buy from you