In this video i'm showing you guys how to test solenoids, i really do recommend Accumax solenoids for you lowriders, hoppers. I created this video with the KZfaq Video Editor ( / editor )
Пікірлер: 35
@blvdkustoms20345 жыл бұрын
thanks alot for posting up videos i run a custom shop and trying to help lowrider come back harder then ever but we really cant do that with no lowrider shops around here ..so learning something every day thanks alot
@lowlowsandmore5 жыл бұрын
Thanks man, I'm glad you like the video. More videos coming soon.
@kolohelau11855 жыл бұрын
Jose D Avelar agreed!
@luisjuarez98603 жыл бұрын
Can i test them with out taking them off( Hookd up as is), or have to takem of and do 1 by 1? Thank you.
@jevontecole7836 Жыл бұрын
Should every one light up on light test? From it being on ground and touching each of the four screws thanks
@JoseHernandez-is9qf6 жыл бұрын
Very helpful video .👍
@joelaguilar89473 ай бұрын
Gracias carnalito helps alot
@zappytoots45664 жыл бұрын
Thank you for explaining how to test solenoids. With hydraulic solenoids, after the engagement click, should atmospheric air pass (blast) through the ports if no hydraulic lines are connected? My new solenoid just clicks and gets really warm for minutes without pushing air through the ports.
Awesome dude!! Is this the same way for a three pronged solenoid?
@lowlowsandmore Жыл бұрын
If your talking about the solenoids with the 1 post on top instead of 2 posts then yes.
@MXL6866 жыл бұрын
I have a problem with my solenoids i am runnin 36 volts for the front when i hit the switch UP the cables and solenoids are HOT and burning 2 solenoids , i install 2 accumax and keep one duralast and now when i hit the switch UP it stuck
@lowlowsandmore6 жыл бұрын
MXL686 Are they properly grounded? Are they tightened to the bracket and are the cables tightened? Sometimes when they are slightly lose they will heat up.
@MXL6866 жыл бұрын
LowLows & More! I Will check all Tomorrow thanks for the info
@Deegeesixseven2 жыл бұрын
u still need voltage meter light not enough under 12 volt will power the light
@muhammadtaahir8379 Жыл бұрын
Mines click but does not pick up If I pick up the bin manually and it gets stuck up you press the button and it goes down but when you press the button to go up it just clicks Could it be a bad solenoid
@lowlowsandmore Жыл бұрын
Could be a bad solenoid, bad connection or corroded wire
@user-qk1br6ik2m4 ай бұрын
What wire you use on the solenoid
@RicardoHernandez-rf9qf4 жыл бұрын
my solenoid is making a buzzing noise, do you know why?
@79monteblack3 жыл бұрын
Did you figure out the issue??
@RicardoHernandez-rf9qf3 жыл бұрын
low battery voltage
@79monteblack3 жыл бұрын
Thanks for the reply!!!! I believe thats whats happening to mine!!
@soulessm80155 жыл бұрын
Good ass shit!. 😷 Neede'd this help. Thank's.
@zanelile29916 жыл бұрын
I did/nt see you ground the solenoid ?
@lowlowsandmore6 жыл бұрын
zane lile At 3:10 i tell that my ground is connectes by the blue wire.
@panchovilla72356 жыл бұрын
Dude you should have shown when you connected all the wires, why didn't you show that? 🤔
@lowlowsandmore6 жыл бұрын
pancho villa I said how to hook it up, i showed it after words also
@panchovilla72356 жыл бұрын
LowLows & More! Oh l had to keep seeing the video, but yes you did say it. One question my set up has battery going to one side of cylinoid and the pump going to the other side of cylinoid. So please tell what part do l hit with the tester ? 🤔
@lowlowsandmore6 жыл бұрын
pancho villa Put the test light on the side of the solenoid where the cable goes to the pump.
@panchovilla72356 жыл бұрын
LowLows & More! So cool 😎 Thanks dude !
@panchovilla72356 жыл бұрын
LowLows & More! Sorry but one more question, my set up is small and everything is going to be still connected. Is it ok if everything is still connected while testing? 🤔