Hey mates, this video saved me some serious fed. My backup camera on my 2008 L322 HSE has not worked for years. I followed all of your direction and it worked like a charm best of all I did it in about an hour including soldering the wires directly to the circuit board. Wish I could post a picture that I took right after I finished of my dashboard showing the back up camera fully functional. I swear this is what KZfaq is all about. Thank you for your video, Cheers, Tony. My next project is how to retro fit a 2005-2009 D3 Bluetooth mod with a 2009-2012 D4 bluetooth module. I have read about the process but have yet to try. Been looking for a YT instructionl video on the wiring harness part. It changed from a 3 row harness to a 2 row so can not just integrate the harness. You two seem like the type of chaps that would hack around with a project like this, so If you know of any videos or feel like giving it a go that would be much appreciated.

Incroyable ! I fixed the camera by just plugging it correctly and and the quality is much better. This video is so much value !!!👏🏽👏🏽

Hi. I just installed the camera kit from these guys and the image quality is much better than ever. Our intermittent camera problems have gone away.

Awesome video. Subscribed. My camera does still work but has some lines as though the connecter is loose. I'll be ready when she gives out.

Hi Guys just like to say thanks for the vids I have an L322 4.2SC rear cam started playing up watched your vid removed and repaired broken solder joint but only lasted a few days so ordered a cam from you ! Arrived inside 48 hours fitted and working and its perfect ! Thanks again Chris

Oh wow,,, ,That's a great fix!!!! Mine is doing the same thing. I have to replace the 3rd tail light, so while I'm at it, I'll look into this. Thank you so much. Cheers.

Rigtig god og lærerig lille film, man kan blive klog af. Tak for det.....

Omg you guy are the best , I gonna fix my tomorrow, thank you so much from Tulsa Oklahoma USA 🇺🇸

Thank you from Rossia!

Still a beautiful truck after all there years.

Thanks chaps, I had to do this on mine.

Excellent video and well done JOB mate . my 2006 will work super crisp when temperatures are close to 0 deg ...was is for Alaska i have no idea because once we are 2deg c and up it just goes dead again till the next frost.

I wonder if you can help me I have a range over L3 32 I don't have the brackets for holding the camera can you buy them separately

Hi, can you fit the rear spoiler with a camera to an L322 without a camera? I know the wires etc would be missing but would like the camera location in the original position. Great videos by the way.

can you guys do a video on how to install (if possible) an aftermarket reverse cam to the 2005 L322. not sure if I have to run the video wire to the back of the nav. unit or if there is some prewiring somewhere closer to the rear of the truck I can access?

Thanks

Thanks heaps Awesome fix

Love these guys.

hi, thanks for this video, exactly what my camera is doing so i will try the same and hope it fixes it too!

can you show me which wires went were when yu soldered them please

Véritablement meilleur votre vidéo. Mais j'aimerais savoir si vous avez des séances de formation sur un site quelconque ?

ok i did that with my 06 RR hse it worked fine when i put it back together but as soon as i mounted it back it went out again i even soldered the 4 wires on the camera can u let me know if there is something else that can be the problem. when i mess with the signal wire not the positive and neg but the other it seems to work for a bit then cuts out when i try to install it back.

Do you have a video how to install a after market dashcam mirror with parking aid which i can wire into the reverse light on a range rover evoque 2016 model thanks.

Hi I know this was a while back, but do you have any tips on soldering the wires to the pins on this camera (there so small and pin case is an issue) cutting it away and cleaning and then insulating etc? I have this very issue and rather than spend mega bucks on new camera this method works for me, if only I knew how you soldered the wires to pins?

I noticed your picture didn’t have the color grid lines. I had them but now I don’t. Any idea on why they went away or how to get them back?

I have this rover. My ignition is not right. If I pull the key out and out it back I can't start it. Won't turn. If I pull negative terminal for 5 sec and put it back with key in it it will start?? What the hell?? Can I install a push start in this situation

is this the same part for the 2011 range rover vogue?

Hi wonder if you can help got a 2011 Range Rover autobiography my screen won't come on the camera is not working sometimes the doors don't lock at the back some times they don't unlock the display for the Saf nav won't turn on at all constant amber flashing light on the power button the screen shows Range Rover but doesn't come on at all it was working fully fine two weeks ago had some repairs to the rear bumper and tail gate n when I got it back it's not working now

i need an answer because each one cost 700€ maybe is a regulation to fix the headlights

Hi, can you 'upgrade' the camera to one from a newer l322? Would the picture quality improve?

hey bro. i have a range rover sport 2006 v8 and i have a problem with the headlights...the eyes looks down and i dont have lights wenn i am on road....maybe you know the reason and you can help me...thanks

have you had any luck with a cheapy reverse camera and a BNC convertor cable? I'm planning to try that at some point.

Full camera available here: www.luxurylandroverupgrades.com/product-page/l322-upgraded-camera-full-unit

Thanks