How to Thread Jack A4E and other Jack industrial sewing machines

Рет қаралды 22,438

Күн бұрын

This video details the threading of Jack A4E industrial sewing machine but is also appropriate for most Jack industrial sewing machines.

Пікірлер: 39

@aprecords3829 Жыл бұрын

Sir, recently I own Jack A7 in India I watch ur video it's very helpful Thanks sir.

@lalsimte8715 2 жыл бұрын

Thank you. I missed some of them while threading and was not able to stich anything as the thread keeps breaking. Now it's working perfectly after following your instructions. Thank you.

@KimThane 3 жыл бұрын

Thank you you’re a life saver. I was doing live and needed this. Very well explained

@ozcommercialsewingmachines 2 жыл бұрын

Thanks Kim, glad we were able to help you.

@susanbosher2492 3 жыл бұрын

Many thanks for a great video!!

@ozcommercialsewingmachines 2 жыл бұрын

Glad you liked it!

@roxymaltese9779 Жыл бұрын

Thank u so much ♥️. I'm new with this professional machine and I really need help, and you arrive at the right moment.

@ozcommercialsewingmachines Жыл бұрын

Glad I could help!

@karennewberry4444 2 жыл бұрын

Thank you. That was very clear and easy to follow

@user-ln4ln6gz1j 2 жыл бұрын

فاكيو

@ozcommercialsewingmachines 2 жыл бұрын

Glad it was helpful!

@stellamaddalena1168 Жыл бұрын

Grazie,grazie,non riuscivo a usare perché infilavo l'ago ,da destra,bravissimo!!! Ora devo imparare a usare il piccolo programma computerizzato,speriamo in bene. (Milan, Italia)

@denishill4372 3 жыл бұрын

Thanks for all the JACK video clips they are very very useful and easy to follow. Could you explain what the Upper of the two thread tensioners is for I have seen that on a JUKI this is to set the amount of thread remaining at the needle, is it the same on the JACK. I have an A5E but the manual does not describe how to set this tensioner, Thanks.

@sharonmiller1140 3 жыл бұрын

Hi Dennis. The first tension on the JACK is the same as the Juki, to regulate thread out of the needle once cut. There should be very little tension on the thread through here, enough so that there is about 1 inch of thread from the needle eye after cut. Hope this makes sense.

@denishill4372 3 жыл бұрын

@@sharonmiller1140 Thanks for that Sharon. I think I was not bold enough with it so it had almost no tension. There is about2 inches left after the cut at the moment so I will increase the tension and see how it affects the length, I was unsure what it may affect so was being very cautious with it. Thanks again for your reply.

@ManishKumar-de5xn 2 жыл бұрын

Good work

@ozcommercialsewingmachines 2 жыл бұрын

Thank you! Cheers!

@roxysophia7 3 жыл бұрын

Can you please make more videos for F4 jack machine I’m buying one but all the videos I found are different language thank you!!

@ozcommercialsewingmachines 3 жыл бұрын

Hi Ruth. The JACK F4 machine doesn't have any of the extra buttons and such that these videos are about but you can use the threading video as the JACK machines all thread the same way. I don't have an F4 to do any videos on I'm sorry.

@sissykirby108 Жыл бұрын

I'm so thankful for your channel! I have a A4 machine and was so frustrated because all the tutorials were not in English. I would love to quilt on my machine but I'm not sure how to lower the feed dogs and set the machine up. Can you help? Possibly to a video?? Thanks!!

@ozcommercialsewingmachines Жыл бұрын

Industrial machines do not have a drop feed feature, it is only possible by lowering the the complete feed dog carrier, and would not recommend this. If you are wanting to do free motion work, just set the stitch length to “0.0” and fit a FMQ type foot, it will work beautifully. Thank you for the suggestion, we will make a video on this.

@ISD2024 2 жыл бұрын

Can u guide for trim functuon

@sheycolee3152 3 жыл бұрын

Thank you! Can you do a video on how to wind the bobbin

@ozcommercialsewingmachines 3 жыл бұрын

I have just uploaded a video on how to wind a bobbin. I did it on a different machine but most of the JACK machines wind bobbins the same so it should help.

@zaradickinson 3 жыл бұрын

Thank you for this video. It confirms that my A5E is threaded correctly - but can you help at all with the problem I’m having with my top thread constantly snapping/pulling out of the needle? I had a WhatsApp video call with my supplier because I’m getting a bulky slub of cotton at my start tack. They told me to turn the thread tension knob clockwise to resolve this. It definitely has not resolved anything and now it doesn’t seem to matter how much I adjust the tension knob either way… my top thread can’t manage a couple of rows of stitching without snapping. Can you please advise?

@zaradickinson 3 жыл бұрын

Ah I’ve solved it - I don’t know what the nipper is but switching it off has removed the slub on the start tack, and stopped it snapping my top thread!

@ozcommercialsewingmachines 3 жыл бұрын

@@zaradickinson , you may still need to check all your tensions again to check that the bobbin tension is around 23 - 25 grams as it may be too tight. The pre-tension disks may also be too tight, you don't need much tension on this one. When you are running auto back-tacks with the trimmer and nipper turned on you will always get the wad of cotton at the start tack. There is an A5 model that comes with an "anti-birdsnest" attachment which stops this from happening in full automatic. Hope this helps.

@bellaflonta9847 Жыл бұрын

I was wondering if you can let me know why my A4e lets the thread come out of the needle after trimming, thanks , ana

@ozcommercialsewingmachines Жыл бұрын

It means either your pre-tension is way too tight or your main tension release is not working correctly.

@pureinheart7775 Ай бұрын

can the needle guard be taken off?

@ozcommercialsewingmachines 8 күн бұрын

Yes, you can remove the needle guard.

@patty8849 2 жыл бұрын

I'm curious what differences are between the A5E & A4E?

@ozcommercialsewingmachines 2 жыл бұрын

There are a few differences, the A5E has a semi-dry sump which means it is fully enclosed where the A4E has a wet sump, also the A5E has a larger harp area to the A4E. The stitch functions are all the same though between the two machines. Hope this helps.

@patty8849 2 жыл бұрын

@@ozcommercialsewingmachines thank you!

@pajo6923 11 ай бұрын

Well hm, my button doesnt work to bring the needle down to pull up bobbin thread either. I watched this entire video just to see the proper way to pull up the bobbin thread on this machine. Can anyone tell me the secret to this?

@ozcommercialsewingmachines 10 ай бұрын

The buttons don't work until you have started sewing the seam. If you want to bring the thread up you have to do it manually by turning the hand wheel towards yourself.

@pajo6923 10 ай бұрын

@@ozcommercialsewingmachines Thank you!! Im really trying to give this machine a chance but its been pretty frustrating so far. Im starting to think I may never get used to it. Perhaps Im too old school. I tend to enjoy my Consew more with no bells and whistles. Thank you so much for responding!

@susanbosher2492 3 жыл бұрын

Many thanks for a great video!!

@ozcommercialsewingmachines 2 жыл бұрын

No worries!