How to thread the Baby Lock Acclaim serger with step-by-step instructions

Рет қаралды 13,366

4 жыл бұрын

In this video I take the hassle out of reading the user manual to learn how to thread the Baby Lock Acclaim Serger. I explain how to thread all 4 threads, one by one visually for you. Learn how to thread your machine by watching this handy video so you can get started using your new machine faster and get the most out of your Acclaim serger!
To learn the basic parts of your Baby Lock Acclaim serger: • Basic Parts of the Bab...
To learn how to install/remove needles from your Baby Lock Acclaim serger: • How to install or remo...
MakeIt.Place has a Blog too: www.MakeIt.Place

Пікірлер: 75

@CraftAddictedWendy 25 күн бұрын

I can’t thank you enough! I could not figure out the right and left needle threading path looking at the manual. You made it perfectly clear! So grateful. You earned a new sub! ❤

@MakeItPlace 13 күн бұрын

Glad it helped!

@nikitarayner4220 7 ай бұрын

Thank you for your detailed video this was so helpful for someone who is just starting out.

@michellerassie4224 2 ай бұрын

Thank you so much…. Took the plunge to buy first serger

@malihelilja5272 10 ай бұрын

Thank you so much for this tutorial❤ /Malihe from Sweden

@conniel.4601 Жыл бұрын

Just got my Acclaim. Loopers ok, couldn’t figure out needle threading. I didn’t realize you had to put the threader thing back to see the needles threaded. Your video was great, thanks!

@Jea9nine 5 ай бұрын

yes me too! So much like my Imagine AND so different!

@dennisflenderson6195 8 ай бұрын

Terrific tutorial. Thank you. 😊

@gingertea5006 Жыл бұрын

Thank you so much for doing this. I have just bought this machine and it's always easier to see someone demonstrate this instead of wading through pages of an instruction manual

@rebeccarudman7169 Жыл бұрын

Thank you so much! The close ups were extremely helpful!

@user-wz6fq9lx8q 8 ай бұрын

Thank you so much! I did it! Well done!

@terrijob7818 3 жыл бұрын

This video saved me from muttering bad words while I was trying to figure out the diagrams in the manual to thread the needles on my acclaim. Thank you so much.

@MakeItPlace 2 жыл бұрын

Bwahahahahahahahaha!!!!! I totally understand.... How's it going now? It's been awhile since you commented so I hope it's going smoothly now :)

@cking7382 Жыл бұрын

Very well done video. The close ups and detailed explanations are most helpful.

@marykreps331 Жыл бұрын

This is the best video I have seen

@user-sk8hv6uk3t 6 ай бұрын

Very helpful! Thanks!

@jan9601 5 күн бұрын

Excellent! Thank you!

@cindyfrischer6136 3 ай бұрын

THANK YOU!!

@SB22705 4 жыл бұрын

Thank you so much!! This was a fabulous tutorial! I had resigned myself to a trip back to the dealer for help and found to is video. Thanks again for clear and easy to understand demo!! All my fear eased away as I listened and followed your video. Bless you!!!

@MakeItPlace 3 жыл бұрын

Oh I am SO glad to hear that! If there is anything else you need help with on the machine let me know and I will be happy to create a tutorial for it.

@lindahutchings8745 Жыл бұрын

omigosh thank you! I could not get that upper looper to air-thread and your comment about having enough thread made me go back and check and that was my problem!

@jeanetteh6842 3 жыл бұрын

Very clear thank you. I wish that I had seen video before unboxing my new Acclaim.

@MakeItPlace 2 жыл бұрын

So nice of you!

@nannettenielsen216 3 жыл бұрын

Thank you so much for this tutorial. I am a visual learner and this really helped.

@MakeItPlace 2 жыл бұрын

So am I! I totally get it...

@robbynpetersbennett7835 2 жыл бұрын

Thank you so much! It was so straightforward and I was able to thread my machine very easily.

@samoller 2 жыл бұрын

Thanks for you wonderful, detailed, detailed tutorial. Just what I needed. Huzzah

@terrijob7818 Жыл бұрын

Thank you so much for this excellent tutorial.

@debbierenee7896 3 жыл бұрын

Thank you so so much for this tutorial! I have a new acclaim and this was very helpful. So excited to start using it.

@MakeItPlace 2 жыл бұрын

That is so exciting!!! Let me know if you have any requests for tutorials as you get to know your machine. The Acclaim is so amazing...

@marykreps331 Жыл бұрын

This is the best video I have seen. I just got the Acclaim. Please keep doing videos. If I have questions is there a way to get the information

@karenbatt5200 3 жыл бұрын

These step by step instructions were very helpful, thank you very much. We purchased my Acclaim a year ago and I have only used it for about an hour when the thread broke. I read the manual over and over again and could not figure out how to thread it correctly. When we purchased it from the dealer they did all of the threading and talking and I never got any hands on lessons. They are in another town from us so it was not like I could just drive there for help. Once again thank you.

@MakeItPlace 2 жыл бұрын

I am SO glad this was helpful for you!

@rustylady1 Жыл бұрын

Brilliant video thanks

@conniel.4601 Жыл бұрын

Very helpful, thanks.

@08channieable 3 жыл бұрын

Thank you so much 🌺💐for a very clear tutorial🌸🌺

@MakeItPlace 2 жыл бұрын

You’re welcome 😊

@frenchnicky6418 2 жыл бұрын

Nice video, thanks

@annex9681 3 жыл бұрын

Thanks you so much. It's very clear and I appreciated it.

@MakeItPlace 3 жыл бұрын

I'm so glad it was helpful for you!

@jeannieclark8603 6 ай бұрын

Thank you - it would have taken me DAYS otherwise.

@lindacoppola898 3 жыл бұрын

Thanks so much I have this machine too and I got stuck but you helped me out!

@MakeItPlace 3 жыл бұрын

Glad I could help!

@jodypellecchia3305 4 жыл бұрын

awesome job, thank you.

@MakeItPlace 3 жыл бұрын

Let me know if you would like a tutorial on any other Acclaim function, I would be happy to do it.

@susanmiddleton6780 2 жыл бұрын

@@MakeItPlace I have watched this video over and over but can’t tell if you have the pressure foot up or down during the whole process. Could you please tell me?

@trinaclever8653 3 жыл бұрын

Thank you so much for making this step -by-step video on threading- especially the needles. I was so overwhelmed and intimidated this morning trying to figure out how to thread my new machine. After reading and rereading the documentation, I had almost given up. Then I found your video ... and was up and surging in no time. You made my day 😁👍

@MakeItPlace 2 жыл бұрын

I am SO HAPPY it helped you Trina! Are you loving your machine now?

@trentrylan882 2 жыл бұрын

i realize it is pretty randomly asking but does anyone know a good place to watch newly released movies online ?

@yaelhunter462 2 жыл бұрын

@Trent Rylan Flixportal =)

@trentrylan882 2 жыл бұрын

@Yael Hunter thank you, signed up and it seems like a nice service =) I appreciate it!!

@yaelhunter462 2 жыл бұрын

@Trent Rylan Glad I could help :)

@mandybrierley2338 3 жыл бұрын

Hi agree very well explained. Would like to see how you start and end off a seam on the serger since you don;t use a back stitch as a sewing machine. Thank you

@MakeItPlace 3 жыл бұрын

Great suggestion!

@austinglen3568 3 жыл бұрын

Absolute beginner here. We have subscribed, given thumbs up and are watching your extremely helpful tutorials like front-row students. Is the Acclaim the serger we should buy, or is their a less expensive "Baby Lock" you could suggest? These serger machines seem to be in short supply? Can two men, 57 years each, learn to serg two long pieces of nylon ripstop fabric together in a somewhat professional-looking way? We're willing to learn, but are both truly intimidated. Lol... Thank you so much. ;-)

@MakeItPlace 2 жыл бұрын

Hi Austin!! First, OF COURSE you can learn! Truly, it's all about practice. Regarding the machine, the reason I chose the Acclaim is because of the automatic threading feature and the auto tension feature. There are other more entry-level Baby Lock machines you can and should check out. I started out with an entry level machine and learned a lot with it. I had it for about 4 years until it began to drive me crazy with bad stitches. Like with anything, you get what you pay for. So if you want an excellent machine that is a breeze to use you have to pay for it... The very best way to buy something like this is to look for the sewing stores in your area that are name brand dealers. Then go there in person and they will let you look at, try, ask questions, about all of the machines and you can negotiate your heart out to get the best price. Especially on floor models! Lastly, don't be intimidated because you know what they say, people regret what they didn't do, not what they tried!! You can do this!

@sherrytodd4550 2 жыл бұрын

You saved me! One question: the thread button for needles seems to just stay on,do you push it again to stop??

@cmtrix2627 4 жыл бұрын

Thank you! Worked perfectly!

@MakeItPlace 3 жыл бұрын

Glad it helped!

@gerdahalliday5113 2 жыл бұрын

Which brand of thread do you use? Great Tutorial.

@gerdahalliday5113 2 жыл бұрын

I just purchased the acclaim as well as the accessory 10 feet. Are there other fit available for the acclaim?

@gerdahalliday5113 2 жыл бұрын

Can you suggest a thread storage box for serger threads? I have Madeira serger threads.

@kaykay7830 3 жыл бұрын

Hi. Have you covered how to use the Baby Lock 4 thread revolutionary air threading guide attachment please? I can't find how (or when) to use it. Many thanks.

@MakeItPlace 2 жыл бұрын

I am SO sorry I did not see this until now! I'm not sure what attachment you are referring to? Could it be the one that comes down to thread the 2 needles? If that's the case it is in the latter part of this video for you.

@krystleroy3068 2 жыл бұрын

Is ur stitch fork a flimsy metal that bends if I pull on my chain it will skip stitch and if I make a small stitch on a rolled hem it bends it and it will break my needle want to know if they fixed this ? And if I can order the stitch fork/ or what ever it is ?

@saraaronzon4562 6 ай бұрын

Raise presser foot

@susanreusser4374 3 ай бұрын

Do you have a video with very basic serger terminology & explanations?

@MakeItPlace 13 күн бұрын

Not at the moment but I will add that to my video list! THANK YOU for the suggestion.

@dianeanthony9300 3 жыл бұрын

I I have an Evolve serger. I can’t get the thread to go into the ports. I place it in the port, but it won’t go down. Any suggestions?

@MakeItPlace 2 жыл бұрын

So sorry Diane, I wish I could help but I don't know that machine!

@teetee2307 3 жыл бұрын

Where did you purchase you baby lock acclaim serger?

@MakeItPlace 3 жыл бұрын

Hi there- I purchased mine at Linda Z's Sewing Center in Arlington Heights, IL. With these machines you need to purchase through a dealer.

@gerdahalliday5113 3 жыл бұрын

Which brand of thread are you using?

@MakeItPlace 3 жыл бұрын

I am using SureLock cones "for overlock machines" from JoAnn. It works well but you do have to clean/brush your machine out quite often to keep all the thread lint clear.

@gerdahalliday5113 2 жыл бұрын

Thank you