Thank you very much my friend , I'm really happy that you liked my project...you made my day!

Maria Pantopoulou Χρηστο δεν εχεις πλακα😂

yaun ok Thank you! I hope it was helpful!

Make sure the bolt is locked by something

Storage

Thank you my friend , I hope that I helped you!

Thank you my friend , I hope it was helpful!

Thank you for the clarification my friend..Share the video with your friends! :)

Chain tensioner too. 666 OUT

Haha thank you my friend I hope you enjoyed it!

Thank you very much my friend!

Thank you dude!

You're welcome , I hope it was usefull.

I'm really happy! I'd love to see your version of this patent!

@@fotis.kon1101pls send me ur email id i will send u a video...

@@karants7 my email is fotis.kon1999@gmail.com , I'm waiting for your video! Btw sorry for the delay!

Thank you my friend. I hope it was helpful!

Thank you , I hope it was helful!

Thank you!

Thank you dude!

Thank you very much!

Yes its easier , but my patent has a spring which continuously presses the chain and keep it stretched in every chain variations. After many hours of use the chain became loosest , so i'd have to put one more washer after few months. Washer its a good solution , but its a soft option...

But thank you for the advise anyway. Do you like my project at all?

Hello, im not going to disagree with you,you made a good point. If I put it like you say its going to be safer , but in this case I dont have this option because there were no screews in the motor to hold my base! At least I put a good bearing in the gear to make sure that the whole patent its reliable! Thank you for your advise my friend , I hope you liked my project at all :D

ប្កី

josh edwards yeah until your chain pops off😂

Thank you my friend! I hope that my video was helpfull!

Yep you are right. I was 14 when I build my go kart so I made some mistakes , one of them was to drill holes on the chassis and mount the engine , so my engine is fixed and can't be moved.

Ftw Filmz Thank you very much my friend, I hope it was helpfull!

Can't Kill Me Thank you!

incroyable ha ha

How about the video?

very good too

I've heard of it! Its also a really good chain tensioner. What do you think about my project?

f.kon1 kind of caveman.I am a machinist and on our karts we have sliding engine mount and use split sprockets on the axle for fast gear changes.

William Stanfield Im not going to disagree with you, but I made this project alone when I was 15 years old , having a really low budget of money, so im satisfied with this result. This project is just for fun and not racing purposes.If I make a new go kart now, its going to be much more better and contemporary :)

f.kon1 when we started in 1964 I was 9 and our chassis were tubular so we were able to slide the engine or engines into position.I had twin 2 strokes mounted.I guess your skill level is what you are exposed too.

William Stanfield let me remind you that I build this go kart from zero, having no experiece in the field of go karts. All I want was to build something to have fun with my friends. So show understanding. Also every patent I make may not be good for you, but im satisfied seeing every single homemade part working excellent and unbearable. I dont have your experience in the field, all I want is to have fun and enjoy my constructions!

The chain is #42 and the sprocket is #40 to reduce friction between chain and sprocket. 3 years of continuously use and the chain is as new as the first day. Sorry 😂

Thank you , I hope it was helpful!

After many hours of use the chain becames loosest , so i'd have to put one more washer after few months. After many hours of use I change chain ,so brand new tentioned chain , again washers , and after few months when its loose washers again and again and again.....my patent is self adjustable and much more efficient! But thank you for your advice anyways!

Thank you very much my friend!

Thank you!

This adjuster is 100% homemade, you can copy the desigh and build one for your own engine! :)

Yes its easier , but my patent has a spring which continuously presses the chain and keep it stretched in every chain variations. After many hours of use the chain became loosest , so i'd have to put one more washer after few months.If I change chain , I have to take out the washers again , its very annoying and time consuming. Washer its a good solution , but its a soft option...But thanks for the comment anyways! :)

Can't be wrong if it works

I hope so!

Im using this gear for almost 2 years and everything if fine. After many hours of use the chain became loosest , so i'd have to put one more washer after few months. Washer its a good solution but I belive that mine is better!

www.ebay.com/itm/175065546292?hash=item28c2b83e34:g:ps0AAOSwXGhhuTzV The link is for the clutch. I used a #42 chain and a #42 16tooth sprocket with bearing inside.

Κοιταξε , το δικο μου καρτ μαζι με την μηχανη ζυγιζει 80 κιλα. Η μηχανη μου ειναι επισης 6,5 αλογα , η σχεση στα γραναζια ειναι 10 δοντια-45 δοντια(περιπου 1/4,5). Εχω σχετικα καλη επιταχυνση και μεγιστη ταχυτητα γυρω στα 60 χιλιομετρα. Βεβαια χρησιμοποιω συστημα μεταδοσης με αυτον τον συμπλεκτη που βλεπεις(καμπάνα) τον οποιο εχω αγορασει απ το ebay. Υπαρχουν και αλλοι τροποι μεταδοσης πιο αποδοτικοι , οπως ας πουμε με λουρι που αυξομοιωνει την διαμετρο του δισκου, οπως εχουν τα σκουτερακια. Tετοιο συστημα εχει χρησιμοποιησει ο συγκεκριμενος youtuber kzfaq.info/love/EfmZ9qmyvjEDj3c6f9AN_w . Θα πρεπει να κανεις μια καλη ερευνα πριν προχωρησεις. Πιστευω να σε βοηθησα!

@@fotis.kon1101 Ευχαριστώ πολύ φίλε.

I'really glad you liked it. Sorry but I dont build and sell tensioners. Feel free to build your own one based on my video! Have a nice day!

@@fotis.kon1101 That's sad I was going to ask for one also

I bought the gear from a local shop and used my lathe to put the bearing inside. The base is homemade , I used some metal pieces, welder and lathe.

There are no gears shown in this video! There are however sprockets.

Yes we mean the same thing. I have a sprocket with a bearing inside!

f.kon1 you can buy an idler sprocket with the bearing already in it.

After many hours of use the chain becames loosest , so i'd have to put one more washer after few months. After many hours of use I change chain ,so brand new tentioned chain , again washers , and after few months when its loose washers again and again and again.....my patent is self adjustable and much more efficient! But thank you for your advice anyways!

Thank you!

After some tests I removed 1-2 cm from the spring and made it tight enough. Good note! I hope you liked my project!

Yes its easier , but my patent has a spring which continuously presses the chain and keep it stretched in every chain variations. After many hours of use the chain became loosest , so i'd have to put one more washer after few months. Washer its a good solution , but its a soft option...

Yes you’re right, your paten is not dumb at all, but the washer solution will I say is a faster method, but not as good as your spring patent, maybe I will try your patent on my gokart 👍 is this a #35 sprocket/chain?

Thank you my friend, its a #41!

Thank you very much!

I guess that will be fine

Yes its easier , but my patent has a spring which continuously presses the chain and keep it stretched in every chain variations. After many hours of use the chain became loosest , so i'd have to put one more washer after few months.If I change chain , I have to take out the washers again , its very annoying and time consuming. Washer its a good solution , but its a soft option...But thanks for the comment anyways! :)

Hello. I guess on a hardware store or motoparts store.

Its a 212cc 6,5hp engine for many uses. ( Generators , pumps , garden machines and more)

After many hours of use the chain becames loosest , so i'd have to remove the half link again . After many hours of use I change chain , so brand new tentioned chain , again half link, and after few months when its loose I remove half link again pfff...my patent is self adjustable and much more efficient! But thank you for your advice anyways I apreciate it!

After many hours of use the chain becames loosest , so i'd have to put one more washer after few months. After many hours of use I change chain ,so brand new tentioned chain , again washers , and after few months when its loose washers again and again and again.....my patent is self adjustable and much more efficient! But thank you for your advice anyways , I apreciate it!

Yes its easier , but my patent has a spring which continuously presses the chain and keep it stretched in every chain variations. After many hours of use the chain became loosest , so i'd have to put one more washer after few months.If I change chain , I have to take out the washers again , its very annoying and time consuming. Washer its a good solution , but its a soft option...But thanks for the comment anyways! :)

Hello , Im not going to disagree with you , but I didn't had the option to put the tensioner on the other side because there were no screews on the motor to hold my base. If I wanted to be 100% right I should have put it in the other side. By I think in this occassion its ok, because both sides of the chain loose almost the same..so there is no problem at all :) Thank you for the advise anyway , I hope you liked my project!

If it works, it works! On my lawn mower racer it would definetly not work out, thus I mentioned it. Keep on building.

You are right! There is no room for mistakes at the level of competition. Thank you again for your kind words! Have a nice day!

No you are wrong he did put it on the lose side take a good look again...

Lenny M I watched carefully again: you are right

Robert Stubbs Nope, thats the right side. You're mistaken :)

f.kon1 yes your right i thought it was on the pull side.

No problem , did you liked the project anyway?

So?

@@fotis.kon1101 what "so?" You write about "your patent" (at 00:23) - it's not your patent. plain and simple. A patent is a form of intellectual property that gives its owner the legal right to exclude others from making, using, or selling an invention for a limited period of years in exchange for publishing an enabling public disclosure of the invention. - It's not that hard to understand is it?

@@h34p yeah, as I can see you are really good on wikipedia copy paste. There are hundreds types of chain tensioners out there. Every tensioner based on an standard model. Of course the chain tensioner is not my patent, but this spesific one including the way I adjust it in my motor is my design.

@@fotis.kon1101 Would you rather enjoy if i put it in my words additionally if there is already a definition about it on the net? Ridiculous. "Of course the chain tensioner is not my patent" "00:23 My Patent" ... Sorry man.. the chain tensioner is a cool thing, and kudos for making one - but writing it's your patent is pretty stupid and arrogant to those who invented it. You could try to actually patent it - then you can see if it's your idea or not.

@@h34p Come on dude don't play with words. The chain tensioner as a general idea is not my patent, but this spesific one that I present in the video is, that's why I called it my patent, don't tire me, get over with it.

Its #42

Hello my friend , relax. I'm sure that one day you will be able to build your own go kart!

My holes on the chassis are fixed , I can't move the engine :( After many hours of use the chain becames loosest . After many hours of use the chain is damaged , so I buy a new one...my patent is self adjustable based on every chain length! But thank you for your advice anyways!

Yes its easier , but my patent has a spring which continuously presses the chain and keep it stretched in every chain variations. After many hours of use the chain became loosest , so i'd have to put one more washer after few months. Washer its a good solution , but its a soft option...

James Cochran what do you mean?