I couldn't find anyone that detailed out cutting and setting the trim pieces. THANK YOU!

Thank you for this. I am starting a 60x30 shower project and have a niche that looks like that. Haven't done shower tile and this will really help me. Great idea on the quartz shelf.

Very detailed one of the best I have seen on Niche. it's very helpful for my project.

THANK YOU AZIM!!! I have watched many niche installations but your's really the most detailed and easy to follow . I will be follow your KZfaq skills! You are VERY skilled and talented. You have made my life easier! God Bless and Happy New Year!

Very nice job. I used the same profile instead of a bull nose tile at the end of the shower wall. I found it to be less forgiving in that area because the thinset grit and the material thickness raise it off the wall slightly. This causes your wall tile to be at a very slight angle on the wall. Combine that with the cut edge of the ceramic tile is slightly thicker than the factory edge and not the tile sits slightly proud of the profile. Fitting you to pray the grout line will make it look somewhat acceptable. On the shower niche you can use all factory edges and fill in behind the profile with thinset so it has a much cleaner look. If I had to do it all over again I would have special ordered a profile to match the cut edge of my tile. No one seems to stock a variety of sizes in the polished nickel. Just pointing that out for your viewers. Your installation looks perfect.

Nicely done. I like the use of the quartz base. Beautiful shower.

Thank you for this great video ... I applied your technique to my own shower and it looks amazing.

I love the one piece quartz shelf! Clean look! Nice job!

I watched a lot of videos on KZfaq about making a niche however you’re the only one who talks about the slope be in 1/8 and that’s the answer I was searching for.

Thank you for a great video! You answered all of the questions I had for the project I was working on (even what edging I wanted to use. The AE100 looks amazing! The niche looks great!

Amazing, well explained video! Keep up the good work 👍🏽

Azim, thank you for your tiles videos. You have the best tile niche videos on youtube. I tiled my niche exactly the way you do and professional results. Thanks for sharing.

IMO, this is the best tutorial on how to tile a niche. Thank you sir.

Good stuff man! Turned out really nicely 😉

Fantastic. You should be really proud of yourself. Quartz base is really nice

Cool idea looks awesome 👍

Nice work ! You have a ton of talent and patience.

Looks amazing 👍

Nice. I’m always a fan of the tiles installed vertically.

Looks great! The only thing I’d do differently esthetic-wise, is match the tile orientation on the linear drain to the rest of the shower floor…that would make it more seamless looking.

Super excelente trabajo, lo disfruté de principio a fin. Felicitaciones

Best one I've seen!!! Great video great quality craftsmanship

Nice job, well explained and demonstrated. Thanks 😊

You do a very good job.Wish mine looked that neat.

Damn I wish I had the time to learn how to do this!!! Excellent work bro!!!

Awesome work. Thanks for sharing 👍

Wonderful video. Thankyou from Australia.

Nice work. You gave me a great idea to extend my thin shower niche by using a ledger of quartz. Well DOne

Looks awesome your a master tiler!

What a nice job brother, learned a lot from you, thank you for posted this wonderful video!

I like your work and video. very detailed and educaative. Thanks very much. I leant a lot from it..

great job my Friend!! very nice!1

Great job! Loved

Nice work. Very clean job.

Excelente trabajo amigo, saludos desde Argentina

Really ice work and useful tips

Very nice job all around. I like the tile choices and how you 45’d the metal edging.

Good job guy. Well done.

Men good work nice cutting nice setting..👍🏻

Muy bueno su trabajo excelente yo hago también lo mismo

Good work sir exilent

Beautiful work bro

Awesome job!!!

Outstanding job....I'd hire you 👍👌

nice work. like the attention to details.

Clean work my boy

Great Job ! Grettings from Virginia Usa

Good job, beatiful from Spain🇪🇸

Great job 👏

Nice work Azim ;)

nice work!

Excellent video brother. 👍 Just subscribed.

Good job, man😊

Beautiful!

Master!!!

Well done friend

Your jobs are very neat

Looks awesome

Very nice and precise!

Great job bro

Very good ~

GOOD WORK!

I'm sure that shower will hold up for years , well done...I would say however that you don't really need to make those dog ears on sill, as once you install the side nitche pieces you would have a half inch dog ear naturally without notching and I believe that's enough without having to worry about them ever being broken off. Also when installing the mosiac tiles on nitche back you should space a slight joint against sill , this way the grout or better yet silicone has a space to go in. I never butt tiles to tiles without a slight gap.. .

Nice job man

Nice job.

Yeah that's nice

Good job

nice job!

Looks real nice and clean.

Good job bro

Leave room between the metal and tile for grout, I also believe water can get inside the miter cuts because there is no grout between the miter joints

Nice work bruh!

awesome you did an amazing job bro I follow from Iraq

Also Check Out This Shower Niche Video I DID For More Ideas .Link kzfaq.info/get/bejne/mZ92gMpk1bDVgGQ.html

I Would contract you to do mine in a second. Great job SIR!

nice job

Lovely

Absolutely beautiful work and equally fantastic step by step process! I do have a question: why did you use 3 pieces for the top inside of the niche vs. 1 longer piece? My husband and I are cuter working on our bath remodel and are just wondering why you did it in 3 pieces across the top. Thanks in advance

Very nice

Nice work 👍🏻😉

Do you leave a gap between the metal trim pieces and the wall tile? Is the edge you filed against the back tile or the metal trim?

Well I'm working on my first bathroom tile project and I have a new appreciation for those that are good at this. This is a challenge but I'm getting there. What is your favorite grout? Are you familiar with Laticrete Spectralock 1 premixed grout? Thanks again. Jeff

Nice

It's a good video. I was surprised to see the chipped edges between the tile and the profile, or why you wouldn't take a diamond pad and polish those tile chipped edges before setting the tile. Grout doesn't cover chips. Also that the anchor legs weren't embedded in thinset before setting tile over them. Anyway, still hard work and looks good.

Hi Azim, thanks for the video, Can you link to those lippage tools you used on the top tiles in the niche? at 25:13 in the video. Are they good only for small tile pieces or do they work on larger tiles?

What blade are you using? Also could you have tiled the back first and let it extend to the bottom edge of the niche, then installed the bottom ledge to butt up with the back tiles like you did with the sides and top of the niche?

Nice work. Question.. are you using a 7" blade on a 10" saw? I was thinking of doing that myself too lessen the radius. Do you see any problem with doing that? Thanks again Jeff

👌👍

Vreat work and video.. What is the brand of hex tiles you are using for this. I love them.

Nice work Azim. I'm curious why you didn't use tile edging to outline the niche instead of the metal. Customer preference?

شغل جميل

Amazing Work. Question. Where i can found the quartz base?

Also, o you butt the trim tight to the shelf id let a gap for grout?

Great job 😱😱 where you from ? To charge 650 for labor?

MARE MESERIAȘ.ARUNCĂ MATERIALELE PE JOS .

Really like the quartz shelf. what thickness is that and where would I get something like this?

Nice work. Couple questions please... when cutting the mosaic yile. What are you placing under the sheet to cut? Also, when cutting glass mosaics, do I need a special blade or use the porcelain blade I have? Thanks a bunch Jeff

Thanks

nice job, how much is the quartz shelf protruding out and on the sides?

Good 👏🏽👍🏽