How to “Tune” a Kelly speed controller

Рет қаралды 578

Күн бұрын

Here’s a basic video showing you how to set up your Kelly speed controller in your modified ride on car or power wheel! if you haven’t already wired the setup up, go back to our previous videos to check out how you do it!
This is how to “tune” the ESC once it is all wired up
Make sure you download the Kelly software for your laptop
-kellycontroller.com/support/
Scroll down through the support section and select “KDS” software and it’ll download right to your PC/Laptop
Here is a link for the Rs232 cable that is needed - a.co/d/7SiOMrS
Thanks for watching , make sure you hit that like button and subscribe!
We have some awesome content dropping very soon, stay tuned for more!!
*Modify at your own risk
#sendit #modifiedpowerwheels #car #dragracing #eatsleeprace #fastkidsclub #oxfordpowerwheelsracing #fyp #car #howto #tune #tuning #powerwheels #teterbuilt #howtogofast

Пікірлер: 8

@MrMckenzie2403 7 ай бұрын

From just what I've searched and what you told me, it seems like this controller is key to long-lasting gear boxes with variable throttle. That allows for the power to come in better

@TrevorsFastLife 7 ай бұрын

You’re 100% right! There’s other ways to go fast for sure but we prefer this way, any other way we have occasional carnage, ever since we went this route we have never broke a gear box or gear, running plastic gears , we have burned up some motors but only due to really overvolting motors that aren’t rated for what we put at them lol

@MrMckenzie2403 7 ай бұрын

@TrevorsFastLife i get that. Either way you go, it's only going to last for so long.

@TrevorsFastLife 7 ай бұрын

@@MrMckenzie2403 this is definitely the most reliable/fast way we have found!

@MrMckenzie2403 7 ай бұрын

Thank you!

@TrevorsFastLife 7 ай бұрын

You’re welcome!

@ghchaser84williamcol64 7 ай бұрын

Thanks Alex for all your information. Do you run this controller in most of your setups? Can't wait to hear the news for next year.

@TrevorsFastLife 7 ай бұрын

No problem! Every car we have is running this setup, our friend Ava in the pink mustang, ev and jax in the jeeps, it’s the fastest SAFEST way we have found so far, we have played with a solenoid setup but can’t seem to keep the gears together for more than a few runs, with this ESC, we never broke any gears , do this setup with the 1st gear delete 🤫 and it’ll run 2.80-3.2 depending how many volts , identical to little man’s lambo and race car