How to tune the new Segway Ninebot Max G2 with Android in 2 min.

How to tune the new Segway Ninebot Max G2 with Android in 2 min. - 32kmh

Рет қаралды 30,555

Жыл бұрын

How to tune the new Segway Ninebot Max G2 with Android in 2 min. - 32kmh
In this Video I'm going to show you how you can tune/ speed hack your new Segway Ninebot Max G2 very easy. You just need a BLE Scanner App and you can bring it easily up to 32/33 kmh by switching the hex code.
Firmware should be 1.3.5 or newer. I tried with the 1.3.5 and some out my Community told me that it also worked with 1.3.6
Let me know in the Comments if it worked and which speed you've achieved.
IOS: Bluetooth Assistant - BlueTools
Android: BLE Scanner
Tuning Code: 55AB4D41583253636F6F7465725F31
Original Code: 55AB4D41583253636F6F7465725F30
Let's go!
#escooter #escooterlife #escooters #ninebot #ninebotmax #segway #segwayninebot #xiaomi #xiaomiscooter

Пікірлер: 205

@adminvsr 2 ай бұрын

It’s working fine without issue on ninebot max G2, Master control v1.7.3 reaching 35 km/h. Many thanks,

@GayanTharaka 3 ай бұрын

Thanks mate, I can confirm that this works for the Australian model with 1.7 firmware. The acceleration seems to be a bit weaker than it used to be, but happy to reach 32/33 km/h.

@nadirbelhaj6450 3 ай бұрын

I have a question can you change the speed after you did this on the sliding bar in the ninebot app? Like it is going 32 can i open the app and change it back to 25 on the ninebot app?

@GayanTharaka 3 ай бұрын

@@nadirbelhaj6450 the slider on the app stays the same, only goes up to 25.

@lachie.beaumont8244 3 ай бұрын

I’m in Aus as well, and it’s not working for me? Did you do it any particular way man?

@attilakulcsar976 6 ай бұрын

Hi thank you for giving out this video. I am just contemplating to buy this model and this is great. 25 kmh is a bit slow for me, but this little higher speed would be just great. So how do you paste the code? Do you need to highlight the text, copy and then paste it? Thanks again.

@stefb.706 7 ай бұрын

T’es excellent mon frérot, continue comme ça . Bye..

@user-we6rv3dz8x Жыл бұрын

Recently i moved to Germany i really I appreciate your efforts , by the way you speaks English very good better than me 😊💜🙏🏼

@wma_international Жыл бұрын

Thanks 🙏

@ariowibowo5959 7 ай бұрын

Thank you so much, this works on segway g2 max, version 1.5.1. Now i am able to compete with the traffic.

@CarLoOS93 7 ай бұрын

For me is not working, how did you do it ??

@ariowibowo5959 7 ай бұрын

Same procedure as mention in video. Maybe some segway with different serial number behaves differently? Mine just worked

@ariowibowo5959 7 ай бұрын

I think german model is locked and cant be modified using this tutorial

@UTTPsavageblackkid 3 ай бұрын

@@ariowibowo5959which version do u have

@___Jose 2 ай бұрын

i'm from spain and my firmware is v1.5.1, the BLE scanner don't show me the hex serial, 😐

@drdrift2626 Жыл бұрын

I share mine and we have seperate devices does the speed only work when im connected or does it change the scooter itself

@Byceptor 2 ай бұрын

Damn! This actually works in Aus on v1.7.3 You're a legend bud. 😉

@Byceptor 2 ай бұрын

Max G2 for those wondering. Done in 5min. Happy chappy here. Still wondering what happens when the next Ninebot update comes out. Will the hack remain?

@lucashoward754 2 ай бұрын

@@Byceptor does this only work on androids or on apple to?

@dirtlifenz Ай бұрын

I did it on android and it works. The app on iOS is different

@montecer 25 күн бұрын

What is the code?

@donnawilson-eavestaff 4 ай бұрын

is this limited to the max g2? I have the f2 pro and want to get increased speed. I'm in Nz

@petrit721 2 ай бұрын

hex number is not coming up

@berni488 4 ай бұрын

I tried this on europ model from belgium but i doesnt worked for me anyone tips ??? It still stays on 25km/h

@samartheicon 2 ай бұрын

Thank you man, my G2 is reaching 35 km/h in Australia

@anasbye1135 13 күн бұрын

How man can u help me?

@samartheicon 13 күн бұрын

@@anasbye1135 you just do whatever the video is doing

@majidzeus8459 Күн бұрын

in the end of code 31 or did you dial another number?

@samartheicon Күн бұрын

@@majidzeus8459 first of all make sure your doing it on an Android device but anyway this is the code for 35 km/h: 55AB4D41583253636F6F7465725F31 and then to change it back to 25 I used the same one but at the end changed: 55AB4D41583253636F6F7465725F30

@MomenElwan Жыл бұрын

your english is good bro , keep going

@wma_international Жыл бұрын

Thank you 🙏

@jacobmassry3228 Жыл бұрын

Is this code for switching from 22mph to 32mph or is it kmh? your description says kmh but the top speed on the max is 22mph . Will this code work the same for a US scooter? Iv'e never done this before does it flash the scooter or its just a simple click? Does this risk the scooter getting fried ? Is it able to handle a higher speed? How would it void the warranty if you can always change the code back?

@wma_international 10 ай бұрын

Im sure it is only for the eu versions vause us is faster from the start. Yes kmh

@Elias1net Жыл бұрын

Can you please help. I have a android and I download the BLE scanner app but my new G2 does not show up?

@amineaguenini1629 8 ай бұрын

Same probleme !

@jasonward1921 6 ай бұрын

Confirmed working for me in NZ on firmware version 1.5.3

@jayeshpercy9265 5 ай бұрын

Hey bro just got mine last week, does this still work?

@jasonward1921 5 ай бұрын

@jayeshpercy9265 not sure about the latest firmware. So if yours in on a lower firmware you should be good

@maximschwindt7096 Жыл бұрын

Hallo habe bei der segway Ninebot App Probleme den Scooter zu entfernen

@sirbeezeesgamingandstuff5398 4 ай бұрын

Working!!! To all, at first didn't work but I had the wrong device I connected to - If not working, make sure you have the right device you're connected to on the BLE App - Working like a charm on my Ninebot Max G2 - Thanks SO much dude!!! Loving it and a great video!!!!!

@bradleyshane7170 2 ай бұрын

Mine doesn't show the Hex code

@jackhanneman3116 Жыл бұрын

Ich habe den Tuning-Code per BLE-Scanner geflasht ... die Geschwindigkeit ist auf 30 km gestiegen ... ABER gestern habe ich meine Firmware auf der Original-App aktualisiert und die alten Einstellungen wiederhergestellt ... 25 km usw. .... Ich habe es noch einmal mehrmals mit dem Tuningcode und BLE-Scanner versucht, aber 30 km sind nicht mehr aktiviert.

@wma_international 10 ай бұрын

Geht ab FW 1.4.. nicht mehr

@69Labrat 7 ай бұрын

More English g2 max videos please 😅 there is next to no modification videos and you have a bunch on your other channel, but I can't understand them

@tamaskeller8365 Жыл бұрын

Will be enabled the cruise control as well? Because right now it is disabled in Europe.

@wma_international Жыл бұрын

It is not available now. But in the next time I think it will be possible

@mertpaksoylu13 11 ай бұрын

Is it possible to set up F2 PRO Segway without voiding the warranty? The current limit is 25 km/h.

@wma_international 10 ай бұрын

There is a code for f2 but Im not sure if its possible to track the hack

@drtwinch3299 9 ай бұрын

What is the code

@RustyBlades 6 ай бұрын

Where do you find the code to change thanks

@bluepawn 7 ай бұрын

I have millions of Bluetooth BLE near me... but can't find my serial number of my kickscooter... it looks hidden.

@MrSimonmust 5 ай бұрын

Hi, Great vid, works for older software but does this work for Max G2 with 1.7 software? I read that (if it does work) the speed reduces from 32kph to 25kph at 40-50% battery. Using the video process there is no figure in the "properties". only has Properties: write,write_no_respons. There is nothing for HEX. What number do I use? Please help Thanks

@___Jose 2 ай бұрын

i'm from spain and my firmware is v1.5.1, the BLE scanner don't show me the hex serial, 😐

@bluepawn 7 ай бұрын

I have the version 1.4.4, is there an update of your video about this version ? as that is not working anymore. Thanks.

@wma_international 7 ай бұрын

No only till 1.3.6. You can check out my german Channel. There are more Videos about other tuning Options

@erwindavid6374 4 ай бұрын

Good morning, where did you get the code?

@user-jw7kc9fu7y 4 ай бұрын

Hey can you help me ? I want reinstall my firmware on my MAX G2

@mertpaksoylu13 11 ай бұрын

Thank you for the video Liked & Subscribed to your channel . I am confused as to why premium scooter companies like Vsett and Inokim do not include electric horns or turn signals on their products, which people often ride on the roads. Segway seems to be leading the way in this category. I also appreciate the designs of other brands, but it would be beneficial to include these technological features.

@wma_international 10 ай бұрын

Thank you🙏

@janosszantovan9907 3 ай бұрын

Hey buddy. Thanks for the video. I have a questions. Working whit iOS?

@m11kan 5 ай бұрын

Does this work with G2E model?

@ThePepsaN Жыл бұрын

today it was updated to 1.4.4 and the code does not work. I tried again but without result

@Ceffeer Жыл бұрын

Same here...

@wma_international Жыл бұрын

Does not work if updated to 1.4.4. only with the older Versions 1.3.5/ 1.3.6

@Ceffeer Жыл бұрын

@@wma_international do you think it will be solved in the newr future?

@podorozhnik4104 Жыл бұрын

@@wma_international wir haben es schon verstanden. Wir sind an Informationen interessiert. Vielleicht wissen Sie, wann es einen neuen Weg geben wird? Ich möchte schneller werden

@eenig8730 Жыл бұрын

Hey. Just got the max g2e eu version yesterday. Got it running 36.5 kph eith 1384w peak eith xiaodash and segway ninebot app. No other mods etc. I also have the us options in ninebot app , Cruise control etc. My question is, should I be worried frying something with the 1384w peak ? Regards from denmark

@thepoohwinnie5389 Жыл бұрын

Have you connected the scooter to ninebot app before changing the serial? And if so what version you were at?

@Fft-it1fk 11 ай бұрын

Jeg har også lige fået en G2E kan du hjælpe mig? 🙏🏼

@eenig8730 11 ай бұрын

@@thepoohwinnie5389 i updated all things firmware etc before changing region with xiaodash. Just remember to unbind and rebind with segway app after then it should work :)

@eenig8730 11 ай бұрын

@@Fft-it1fk klart mate, du aktivere bare med segway appen , opdatere firmware . Efter det så brug xiaodash til og ændre region. Og så unbind din scooter fra segway app og bind igen. Så har du alt du skal bruge :)

@eenig8730 11 ай бұрын

@czeczej2795 i was on 1.4.4 when I changed

@predatorrtx3528 Ай бұрын

#WMA_International Hi, does this also work with the G2D version? Do I have to disconnect the application after entering the tuning code?

@ssddssff123 Ай бұрын

Does not work for MAX G2E European, firmware 1.7. Tried many times. Simply ignores changes.

@eggmangle Ай бұрын

Same here. I noticed if you open the ninebot app immediately after adding the code in the ble app, the max speed slider for sport mode goes up to 40kph, but as you scroll to full that value gradually drops back down to 25... Very strange

@jonaliseacarreteromarquez8042 4 күн бұрын

@@eggmangle Did you find any solution?

@eggmangle 4 күн бұрын

@@jonaliseacarreteromarquez8042 unfortunately not

@anderslavendt7229 3 ай бұрын

Hi Denmark, My Shows the code in HEX, and the change randomly

@The_Cannabis_Connoisseur Ай бұрын

What is that piece on the handlebar right next to the thumb throttle?

@Teddy-db2ob Ай бұрын

That is the clip to when you are folding it.

@fitfat98 11 ай бұрын

please make a video for tuning 1.4.4 firmware

@KVCOG 7 ай бұрын

Xiaodash, go basic, go select region, select custom serial, write 01GX……. (Remaining same either the orginal code). Mission complete for 1.4.4 and 1.4.8. Enjoy

@Rediuss 4 ай бұрын

@@KVCOGis it still works?😊

@matthewmonksm 7 ай бұрын

Are you able to do all your other videos from your other channel into english

@June-dd2hh 5 ай бұрын

It works for me here in New Zealand. 35km/hr

@jayeshpercy9265 5 ай бұрын

Hey bro how did you do it?

@laupascal 2 ай бұрын

I have DRV 1.4.8, BLE 1.6.10, serial 01GYD*****, its doesn't work. please advice

@laupascal 2 ай бұрын

i have the EU version

@Elscooter-geekout Жыл бұрын

In Sweden we can only drive in 20km/h and scooter can have maximum power of 250W, that's not enough for some heavy riders even.

@bluepawn 7 ай бұрын

250W ???? my god, in Switzerland it's 20km/h and 500W and I'm complaining strongly because of the W.... as we have so many hills it's a kind of impossible to climb.

@Elscooter-geekout 7 ай бұрын

@@bluepawn Yep, almost no scooters actually have 250W though, if you ride "normal" and don't draw any attention to yourself and have a scooter looking legal, than it shouldn't be to much problem though. But yes, 250 isn't good for more then going forward.

@errolljones8432 Жыл бұрын

Awesome 🤗 in jamaica it's 30. I have the Hiboy s2. But I'm thinking of getting it but how long does it maintain the speed.?

@wma_international Жыл бұрын

Thank you🙏 What do you mean with maintain the speed? To what battery level?

@errolljones8432 Жыл бұрын

@@wma_international ok I understand the first tubas

@errolljones8432 Жыл бұрын

@@wma_international I was saying the first two bars

@scarham3r814 Жыл бұрын

@@wma_internationalDoes this work with ninebot f2 pro??

@LekkerDops 3 ай бұрын

Nope, new firmware 1.7.0 does not show the Hex value anymore to change. This mod no longer works

@OscarAndresPabonEstrella 5 ай бұрын

Hello, do you know if it is possible to do this with the version 1.7 ?

@GayanTharaka 3 ай бұрын

Yes, I just did mine.

@TomeCile 3 ай бұрын

@@GayanTharakahow did you do it? It doesnt work for mine. Im on 1.7.0 with serial 01GY

@GiorgioAbdElMessih Ай бұрын

@@GayanTharakacan you give us some directions?

@JensErmgodts Ай бұрын

Hello i have the same the 01GY and mine drive only 25 kmp but live in Belgium how i can ontluck the speed

@naird1064 Ай бұрын

@@JensErmgodtsdat gaat helaas niet Met de Europese versie je moet een USA controller Halen

@breadgarlichouse 10 ай бұрын

New firmware version doesn't work!!!!

@girolamomazzonello3185 9 ай бұрын

Mi dispiace in Italia ho provato ma nulla sempre a 25kmh rimane😢

@kyoukai5292 2 ай бұрын

why my segway g2 max can't change region im from s.korea😢😢😢

@JensErmgodts 2 ай бұрын

Hello can some one explain in dutch how to set it up til 30 35

@Elscooter-geekout Жыл бұрын

Ah ok, now i connected the dots. I saw this two days ago but when i saw the German one, i didn't connect that it was you :) Hope Ninebot review comes in english aswell then!

@wma_international 10 ай бұрын

They will! Thank you 🙏

@alexnadrk.1544 4 күн бұрын

How to make 45 ? my G2 stops at 35

@JosephJones-ur6ez 8 күн бұрын

How do you tell if it's German or Australia

@lucashoward754 2 ай бұрын

just did it, can be done on apple to in aus and now going 35kmh

@drdrift2626 Жыл бұрын

Are there codes for 1.4.4 or a way to downgrade my master control

@wma_international 10 ай бұрын

Does not work with 1.4 and there is no chance to downgrade at the moment

@breadgarlichouse 10 ай бұрын

@@wma_internationalplease i want to to have also fast!! 22kmh is too slow. German rules.... scheiße!!

@ocariocaportugues Жыл бұрын

I have a ninebotF4d it goes up to 20km/h, can I use that same code?

@wma_international Жыл бұрын

No the code only works with G2. At the moment I dont have a code for F4

@ayoubbenchaita247 Жыл бұрын

@@wma_internationalhi thank you for the video, actually i need a code for my ninebote audi electric kick scooter ? Thank you again

@erwindavid6374 4 ай бұрын

Is the code you used the same one I will use?

@raletrix7991 Жыл бұрын

Wo bekommt man den Code her ? Ich möchte das mit den P65 testen🎉

@wma_international 10 ай бұрын

Geht nur beim G2

@majidzeus8459 Күн бұрын

thanks work for me 25 update to 32kmh how to update to 35 or 40kmh?

@tankurtul 4 ай бұрын

What is the code you pasted, where did you copy it from?

@dirtlifenz Ай бұрын

In description

@jamarkgaming 11 ай бұрын

can i do it on Ninebot KickScooter MAX G30D II?

@wma_international 10 ай бұрын

No only for G2

@foxhound-w3072 11 ай бұрын

Can you test this setting with xiaodash. I read that would work on 1.4.4 version.

@Fft-it1fk 11 ай бұрын

works with xiaodash app change to uk/us version 35 km/h and cruise control active in app

@foxhound-w3072 11 ай бұрын

@@Fft-it1fk Hi! I tested Xiaodash and US region change. I got invalid serial number and i have to go back EU region setup. Seems to be that G2e version and newest firmware wont allow region change.

@wma_international 10 ай бұрын

Does not work from 1.4 on

@ad05gaming65 3 ай бұрын

Tried it and it stopped connecting to my phone

@TomeCile 3 ай бұрын

I'm on 1.7.0 with 01GY serial. Does anyone has solution for me without changing controler?

@vincent_gbls739 2 ай бұрын

Did you found any solution ? Im searching too

@TomeCile Ай бұрын

@@vincent_gbls739 no : (

@burakrasan3290 19 күн бұрын

1.7.8 it didn’t worked for me. Any recommendations?

@burakrasan3290 17 күн бұрын

update: app didnt show 35kmph only shows 25 but its working somehow

@Willy12052 8 ай бұрын

What is the code that you entered

@CalmBicycle-jv4it Ай бұрын

Where do i find the number ending in 30?

@OliverBuck-i4o 26 күн бұрын

Caption

@eenig8730 Жыл бұрын

Have you testet xiaodash with this scooter ?

@wma_international 10 ай бұрын

Did not work with the german G2 Version

@eenig8730 10 ай бұрын

@@wma_international not good :(

@gkuchta4534 Жыл бұрын

Hi . what about the ios BLE scenner anyone give it a try

@wma_international 10 ай бұрын

Yes, works

@scarham3r814 Жыл бұрын

Does this work wirh ninebot f2 pro?

@wma_international Жыл бұрын

No, you need another code

@kszytok Жыл бұрын

Is the iPhone app willing to do this procedure or it's only possible on Android device ? I see there is that app on appetite. Great work by the way .

@wma_international Жыл бұрын

Thank you🙏 Yes, also possible with IOS 😉

@humainplanete1437 11 ай бұрын

@@wma_internationalwhich app though

@miichealbolton559 6 ай бұрын

worked on mine Australia based 35kph now

@lachie.beaumont8244 3 ай бұрын

I’m in Aus as well and it didn’t work..? Any particular way you did it?

@Difrancodaniele Жыл бұрын

Ciao, io ho iphone ios , non ci sono riuscito

@elmasfresco1608 Жыл бұрын

I can use it for max g30d?

@wma_international Жыл бұрын

Only for G2

@ayoubbenchaita247 Жыл бұрын

@@wma_internationalhow can we find a code for our scooter ?

@Aiana3D Жыл бұрын

the version of this scooter in Australia is way different, no indicators or reflectors, and the carry lock / bell (it's all one piece) is on the left seems super stripped back ok, turns out what i bought was the G65, not the Max G2. probably won't see the G2 coming to Australia >~>;;

@qwertiee 10 ай бұрын

As you mentioned yea, you bought the wrong scooter lol. I live in Sydney and my G2 just arrived. We definitely have it here in Australia

@tomcan-cl 3 ай бұрын

There is a new G2 controller that can reach 40km/h and comes with NOS

@ClaudioAlbertoArca 7 ай бұрын

está bueno!

@samuelspraggins1801 2 күн бұрын

Where is the hex code to copy?

@N1CKED Жыл бұрын

can i use the same code for Ninebot F2 PRO D?

@tl4438 Жыл бұрын

No, this is the code for F2 Pro: 55AB463253636F6F7465725F31 Do the same steps, but use this code instead.

@N1CKED Жыл бұрын

@@tl4438 thanks

@wma_international 10 ай бұрын

Thank you🙏

@neprevazutul 10 ай бұрын

Does it work on Xiaomi 4 ultra?

@wma_international 10 ай бұрын

@dvdgar32 9 ай бұрын

In Spain is only 25km/h

@theoniexit2334 Жыл бұрын

Does it work for g 30

@wma_international 10 ай бұрын

@JoelJnobaptiste Ай бұрын

Hey what the french country's

@albertchavez8638 8 ай бұрын

USA 22 miles limited

@ivanbilandzic6571 9 ай бұрын

Wher can i find dis code?

@bluepawn 7 ай бұрын

in the title subject of this video

@reidmybooks8294 10 ай бұрын

Nope. Didn't work for me. So sad.

@oldm8alfie 6 ай бұрын

i bricked my max g2 with Xiaodash lol

@homemaderecipe4610 10 ай бұрын

how i can find the. code to copy paste it please

@BURNSYINK 5 ай бұрын

i got it to 35 kmh S/N - 4th to V

@junenarvaez945 5 ай бұрын

how bro?

@BURNSYINK 5 ай бұрын

@@junenarvaez945 Xiaodash changed S/N to V , 4th from the left.

@DarrenCathay 5 ай бұрын

1:23

@koko-tw2uk Жыл бұрын

unlucky under 60%battery it drops to 25kmh ...

@wma_international Жыл бұрын

Yes but this is normal. Always depends on the mode and also weight

@koko-tw2uk Жыл бұрын

@@wma_international the issue is that it’s a 36v battery, my KQi3 pro is 48v and it last 30kmh till 20% battery

@koko-tw2uk Жыл бұрын

@@wma_international todays standard is 48v, 36 is outdated…., I’ll return my G2 max tomorrow

@okosajy5296 Жыл бұрын

Im thinking of buying max g2 or kqi3 pro/Max what should I buy

@koko-tw2uk Жыл бұрын

@@okosajy5296 KQi3 max, if more budget p100s, G2 sucks atm

@ivanbilandzic6571 9 ай бұрын

Hau dis hex code apired on ?

@ivanbilandzic6571 9 ай бұрын

Wher u get code?

@Jebersbach 11 ай бұрын

Ninebot F65 😢

@bluechevy 10 ай бұрын

What is your max speed on F65?

@Obai42 2 ай бұрын

Saudi arabia 25km🥲

@tyjohnson7327 4 ай бұрын

when you tell people this you need to do it clear and direct not spin all this other crap in the process you just confuse people just show them how and stop with the gibberish crap not needed

@tyjohnson7327 4 ай бұрын

WORKS ON AUSTRALIAN 1.5.1 FROM 25 TO 35KM

@BearGrillzRS 3 ай бұрын

theres another dude who explains it much better using less silly steps that you do

@victorymaker2684 3 ай бұрын

Where ?

@BearGrillzRS 3 ай бұрын

@@victorymaker2684 his youtube channel is called Tech Man Pat, vid im talking about is called "32Km/h - How to unlock the Segway Ninebot G65 Max 2 speed"