Just a small explanation of what you need to turbo a 4g64 sohc.
Пікірлер: 60
@briangarza90458 ай бұрын
Great video very informative to help people get started. This is what I'm about to take on as a project myself. And now you've given me a base to start on.
@stanleysdsms70586 жыл бұрын
Gotta love these 2g 4g64 engines. Can hold a lot of power for a reasonable amount of money. I just put one into a gst shell bc my spyder shell was way to gone to fix.
@MrBobbyloc6 жыл бұрын
April Stanley i have a 2g spyder 96 eclipse you think i should modo my 4g64 por can i swap a 4g63 in muy 96spydey?
@stanleysdsms70586 жыл бұрын
bobby choch if yours is a 4g64 I’d leave it in there and turbo it. Do the timing belt and stuff and turbo it. I got a 16g on mine and it’s been running good with no problems at all. Or if you want take the head off the 4g64 and put a 1g or 2g head on it.
@MrBobbyloc6 жыл бұрын
April Stanley can I swap the head AND also turbo it? (And timing belt, and bolts on)
@aaronhenderson69606 жыл бұрын
I am researching building turbocharging my 4g64 oulander. I would need to do some research for spacing but your saying if I got a stock 63 turbo manifold it would bolt on to the 63. Also are u running stock ecu settings on the car or can it be tuned. I figured I would have to buy a proformance ecu to tune everything. Maybe have to wire it up like you do for a 63 then do that??idk also did you drill and tap the oil pan or the block to feed the turbo?? Any help would be appreciated.
@soulsnatcher92283 жыл бұрын
4g63 and 4g64 are basically the same exact block. Im running a 4g64 with a 63 dohc head in my gst with hybrid 63/64 pistons
@izaelsanchez31613 жыл бұрын
4g63 head of the 2g is the same of 1g?
@theblackman045 ай бұрын
I’m running 4g64 bottom and 6 bolt head runs great
@pablo_dking60096 жыл бұрын
Hey men, I have 2g spyder 4g64 but I rotate de pipe water 180* with radiator gst and I use a hose 90* , and work very very fine, thx for up your machine 😍
@nx74974 жыл бұрын
wat fuk u jus sed men
@enveegaming4 жыл бұрын
I have a cherry 2003 outlander 4g64 low miles i rebuilt the motor for dependability and put headers on it you think i can do the same swap as the spyder?? If not its a good everyday just a cheap car id like to do a little with not many built outlanders.
@manofsteele2124 жыл бұрын
Aye man would you have any idea if this Would be the same concept for the Mitsubishi Galant as well?
@elijahstewart13333 жыл бұрын
you say the sohc revs to 7500 just fine? do i need to do any bottom end stuff for that? im really new to this engine and im trying to build a track/half daily 3g eclipse, looking for about 400hp
@johnmarco50173 жыл бұрын
have you tried putting ev0 6/7/8 4g63 turbo manifold on there?
@brentrhodus99362 ай бұрын
I know this is old but what about knock sensor. I have a gsx without engine was trying to get her back on the road cheap for now
@stephanbelly63345 жыл бұрын
How did u get started
@seb38584 жыл бұрын
Did you worry about the nonturbo high compression Pistons?
@levifern54566 жыл бұрын
why not do dohc swap from 1g talon , i like build and everything just wondering, i have the gs block with 1g dohc with 2.6 stroker kit on thats im building
@levifern54566 жыл бұрын
gotcha was just wondering and what dohc are u talking about there not quite the same at all and u rev higher rpm with dohc
@GabrielDiaz-ry4gb5 жыл бұрын
Hey is there anyway we can get in touch for some pointers ?
@ronaldxd27 жыл бұрын
Hey dude, i have an Eclipse GST and want to put a 4g64, its necessary to change all the engine wires, or just plug the non turbo ECU? I need to change engine sensors connectors? Thank you!
@ronaldxd27 жыл бұрын
Thank you man! Im going to do this change. I paid for a forged 4g63t that never worked well, tired of spending money. I will keep the wires and GST fusebox too. Maybe in the future i can put the 14b turbo and do exactly what you did.
@ronaldxd27 жыл бұрын
Nice! But its rare to find a 4g64 from a spyder here, im thinking about using the Mitsubishi Expo (Spacewagon) 4g64 (94-95) engine, somes have the ECI MULTI label on the admission. They don't look to use the same sensors, maybe will fit this engine or its the same thing?
@Bomhilsnotcountries6 жыл бұрын
What injectors did you use stock GST 2.0l and did you change the injectors resistor box with the 2.0L one. Also I know you need the oil pan from 7 bolt and best to get a SS feed line and feed from oil pump
@Bomhilsnotcountries6 жыл бұрын
Add me on Facebook facebook.com/Thomasskates I am on dsmtuners
@omarhurtado35316 жыл бұрын
Hey i have a 1992 mighty max with the 4g64 sohc manual, and i bought a 96 gst auto. You think everything will swap over from the eclipse to the mighty max the same? Love what you did by the way
@omarhurtado35316 жыл бұрын
How about just everything else but the block. Like turbo manifold, turbo, ecu, fuse box...?
@omarhurtado35316 жыл бұрын
Just like how you swapped everything from the 63t to your 64...
@2davydo5 жыл бұрын
Yeah Me too I have the same truck as you a 1992 Mighty Max 2.4L and am wondering how to turbo it Too. I got a turbo Exhaust manifold from a 1988 Cordia Turbo . It will bolt right up to your existing head. But i'm Just not sure about the ECU, and intake manifold. injectors etc. Might Just be easier to just do a head swap w/a 2 g DOHC head and wiring from a 2G eclipse or galant.
@mowcee16 жыл бұрын
Nice build. How much psi are you running? I've read a lot about the stock bottom end not able to handle 10+ psi and last due to the N/A pistons, I've read the rods are pretty much the same as the 4g63's. But most pushing 7-8psi to daily drive it reliably. Might grab me a Spyder an do the same... Any tips to help me along the way? Not trying to make crazy power, a comfortable 300whp is enough for me.
@ibxlegendx5 жыл бұрын
auto or manual?
@dsmchick9355 жыл бұрын
Thats it for real?
@quincy28454 жыл бұрын
Will the 4g63 headers or front exhaust system fit on the 2.4L spyder ? Since nobody makes em no more
@quincy28454 жыл бұрын
BoostedNaSpyder oh man thanks does it matter which headers to use I just wanna swap the head and header and use for a daily for now
@burg2daworld5 жыл бұрын
Niceeee. Is this a manual or automatic?
@dsmchick9355 жыл бұрын
You need to go through more details on how u did the swap. Im going to turbo my 4g64 need help
@stylen0nyou6375 жыл бұрын
Elle Shah let me know how it goes
@shakeelcarl89853 жыл бұрын
Mi have a galant it com with 4g64
@MostGenericUser9 ай бұрын
Would have been nice if you gave more information. Even today there is very little information on how to turbo a 96-99 Eclipse Spyder GS. In fact most the good info has disappeared due to sites going offline long ago that held a lot of info. There pretty much never existed anything detailed enough to make it easy to do though, there is always a lot of necessary information left out.
@yami4g639 ай бұрын
I need to remake the video. And do a better job I agree.
@MostGenericUser9 ай бұрын
@@yami4g63 that would be great
@kuvsqu7 ай бұрын
@@yami4g63please do !! I’m trying my best not to sell my spyder and it needs to come off jack stands
@ibxlegendx5 жыл бұрын
Do you have a write up somewhere that you can send? of all the parts you had to get t o boost it?
@ibxlegendx5 жыл бұрын
how did you do it for the intake? whats your hp right now?
@ibxlegendx5 жыл бұрын
did you feel a good amount of difference?
@NathanKirby20015 жыл бұрын
I'm getting a 97 spyder wish me luck
@jdmchickkustomz94177 ай бұрын
I know it was 6 years ago but I have questions. I have a 4g64 in my 99 Spyder, I also have a 4g63t from a 97 GST hardtop. I have the wiring harness,ecu everything. How hard is my swap gonna be? Do you know what will be different
@yami4g637 ай бұрын
Not too bad if you have both harnesses.... fues box harness and engine harness from the gst 4g63 will plug and play into the 99 spider. Have to swap both harnesses through. Plug and play under the dash.
@jdmchickkustomz94177 ай бұрын
@@yami4g63 I do have both harnesses but that sounds complicated
@k2fort4326 жыл бұрын
Nice job but isn't easier to just flash the ecu after the turbo is bolted up
@kennyandrews75717 жыл бұрын
I have a 99 spyder gs im about to turbo I want to keep the sohc too yours looks pretty fast how much boost you running?
@retro-butionautomotiveprod96144 жыл бұрын
do you have to change to low compression pistons?
@retro-butionautomotiveprod96144 жыл бұрын
thanks
@retro-butionautomotiveprod96144 жыл бұрын
@@yami4g63 i thought 4g64 engine are 2.4 liter engine , if you use 3sgte pistons it will be smaller on block, correct me if i'm wrong
@retro-butionautomotiveprod96144 жыл бұрын
@@yami4g63 thank you for the technical advise
@goodguy...badrep.3 жыл бұрын
@@yami4g63 Good info here. I just picked up a 99 Spyder and I have turbo goodies left over from my Galant VR4 build. No electronics tho. It does have a blackbox ecu, but Im reading that support for ECUflash is declining... Do you think upgraded fuel injectors, pump e85 and AFPR would be fine for the stock ecu and a 14b?
@socberttrucker35987 жыл бұрын
Put an evo 9 mivec head on it!
@perksy16754 жыл бұрын
I got a Mitsubishi Eclipse 2003 Spyder GS Convertible and it’s in shitty condition.