limitless rc I fucking cringed.... like what the hell?

limitless rc ikr like wtf

limitless rc yeah and they are on backwards too

limitless rc seriously. And it looks like their on wrong too

ikr

it is his wife

photos of wife pls

Duc Huy Luong hahah

Duc Huy Luong for educational research purpose.

Ladies and Gentleemn! Its really cheap here: www.gearbest.com/rc-cars/pp_351315.html?lkid=12749668 I hope it'll be usefull! :)) kzfaq.info/get/bejne/jKp8qsSmu5iYmnU.html

Prixo thank bro

Prixo it depends on the weight of the car, and the ampere of the motor

Prixo what does the 540 put out

If you look at the test with the upgrades the circumference of the tyre increases at higher rpm's (due to centrifugal forces). The speed at 4970 rpm is probably significantly more than 90km/h.

nope

I wish I read your comment before buying the motor. I have very bad cogging problems now :-( Do you mind posting link to the motor you are suggesting? I found them but there seems to be a few KV ratings on them. Does the KV rating matter? I was going to buy the 5900 KV one from here www.banggood.com/Racerstar-3650-Motor-Brushless-Waterproof-Sensorless-110-RC-Car-Part-5900430039002300KV-p-1110570.html?rmmds=search&ID=518007&cur_warehouse=CN

You’re going to get cogging with a sensorless motor. Sensored brushless is much better and get a program card to program your esc. Also buy components separate it’s much better than cheap kits. Also brushed is muchhh better for crawling because of slow speed control. Just my two cents and many years of rc fun

MrMikebeben - kinda missing the point bro, I was just warning people that the 2838 size motor in this video is underpowered on the low end to the point where you won’t get it running in thick grass, trying to start uphill, or if you’re up against an obstacle because the cogging is so bad. The 3650 on the other hand doesn’t have that problem. Yea it’ll cog a liiitle on the low low end but it doesn’t have problems getting going like the 2838. Also the holes will line up with the mount, and it won’t over heat in the 12428 which the 2838 size motor has all those issues and bad. And yes of course sensored is better but that comes with a higher price tag and possible issues on installation. Most sensored motors run CCW and sensored is non reversible unless the esc has a reverse rotation setting (which mostly higher cost ESCs are gonna be the ones with that setting) and the 12428 needs a CW running motor. I’ve overcome that issue with my sensored motor/esc by cutting out a plastic anti reverse tab in the diff housing and flipping the diffs in the housings which essentially reversed the direction the motor needs to spin to make the car run in the forward direction. That being said I understand the concept of brushless vs brushed and sensorless vs sensored, but the point I was trying to get across is that most people are just tryin to go faster without spending too much and the absolute best way to do that is a cheap ass Chinese 3650 motor/esc combo and that the 2838 in this video is junk. The focus being on budget otherwise I coulda have also commented yea just get a $300 sensored setup it’ll run better. I mean duh but who is lookin to spend that much on a $70 car? Everything you said is correct just not sure it was 100% relevant to what I was trying to say or to the point of this video either(which is super cheap brushless power).

engine on one side of the car is a mistake.

@@test1uci this engine weighs 95g. I wonder if the 95g weight on the other side will shift the balance a bit. probably yes.

It was also my thinking and was looking for a comment like yours.

@@TerminatorFRA yep. Wltoys gearing sucks

YourAvgScientist Videos yes

Mattson McCraw yes it is, I have this and one of the tires popped of 😭😭😭 luckily I could replace it.😎😎

Upgrade alliexpress

100% yes

Yes

Switch Off When Not In Use also the braking feature of esc will stress the gears and the teeth will be worn out much faster

Arif Hassan if you were to invest a little more money in a quality esc (one that's programmable) you can adjust the power of the drag brake. also drag brake will not do damage if the drag brake did damage to the transmission the normal brakes would be 10 times worse. It's worth mentioning too that the reason brushless systems have drag brakes is to better replicate the resistance caused by the brushes on a brushed motor.

Mitchell Doolan oh nice thanks for info

Arif Hassan no problem just trying to help

Switch Off When Not In Use

Did you ever upgrade the shocks. The stock shocks can add oil to them.

Same.

sirjolly81 buy king shocks

thank u :)

ThatsMyRc where did you buy

ThatsMyRc dont get either. WL toys are practically toy grad rc's. They may be cheap the quality of the parts is bad. A $75 Rc is prbably only worth $60. A $600 rc is probably worth $500. The parts just wont hold up for very long. More expensive rc's tend to also have more spare parts and upgrade parts and the brands will have better customer service. They is alot more to buy than just the car.

ThatsMyRc why

Josh R e bay or ali expres

I just noticed the parts list is in the description. Thanks for that and excellent video. I must have watched it 20 by now to see all the steps and learning as I go.

@Oscar Villalpando 12428 is all plastic besides motor gear

@@mrmedium7984 Not true, the the later 12428 models come with metal diffs out of the factory.

Gear mesh? Pah no need for that

grandprismatic Not adjustable lol.

Rory Pollitt Stock gear, 95kmh.

i was thinking the same thing, iv striped screws by hand lol

akshay jain Yes, this video was very amazing!