How To Use a 6 Pin Lishi Pick and Decoder (SC4, KW5, etc) On 5 Pin Locks!

How To Use a 6 Pin Lishi Pick and Decoder (SC4, KW5, etc) On 5 Pin Locks! | Lishi Standoff Spacer

Рет қаралды 77,895

Күн бұрын

Do You Really Need The 5 Pin Lishi Version? (SC1, KW1, etc?)
Link To Subscribe➜ kzfaq.info...
Today we are going to check out a new product developed by Deviant Ollam the “Lishi Standoff Spacer.” These spacers are designed to make it so you can easily use a 6 pin Lishi on a 5 pin lock (for example SC4 on SC1).
Historically, I have never been able to recommend that you only buy the 6 pin version because it was just not as reliable. Today we will find out of that recommendation changes!
If you would like to 3D print your own Lishi Standoff Spacer you can find it here: github.com/deviantollam/Lishi...
⭢ DeviantOllam: / deviantollam
You Can Get Started With Your Lock Sport Journey On Amazon!
Get Started With Your Own Clear: Padlock, Dimple Lock, and Disc Detainer Lock! www.banggood.com/custlink/GKK...
Check Out My Progressive Lock List For An Easier Progression Towards More Difficult Locks.
1. Clear Acrylic Padlock: amzn.to/3qYGZ1z
2. Master Lock No 3: amzn.to/2IPvhV1
3. Master Lock 140: amzn.to/2LiKpbB
4. Brinks 40 mm Padlock: amzn.to/2LcjJcJ
5. Master Lock 570: amzn.to/2LiTQba
6. Master Lock 911: amzn.to/2KIXtpU
7. Commando Padlock: amzn.to/2rWx14W
8. American Lock 1100 Series: amzn.to/2rYGJ6g
9. Master Lock 410 LOTO: amzn.to/2KH0TsW
10. Abus Titalium 80TI/50: amzn.to/2LeI2qm
Check Out One Of The Best Cheap Generic Lock Pick Sets Sold At Banggood.com: www.banggood.com/custlink/Gm3...
Check Out A Beginner Dimple Lock Pick Set On GearBest.com www.gearbest.com/lock-picks-a...
Check Out The Panavise 350 On Amazon: amzn.to/2rV7OYI
It Is One Of The Best / Most Used Vises For Lock Sport!
If You Would Like To Check Out All The Equipment I Used To Film This Video You Can Easily Find It All On Amazon!
⭢ Canon EOS 90D: amzn.to/2DHcQh7
⭢ Sigma 18-35mm F1.8 amzn.to/2Pp166p
⭢ YoTilon 360°Horizontal Tripod: amzn.to/2S3rEMu
⭢ JOBY GorillaPod Cameras 3K (6.6lbs): amzn.to/2kdpOcB
⭢ AmazonBasics 60-Inch Lightweight Tripod: amzn.to/2Iy9H7X
⭢ Takstar SGC-598: amzn.to/2rYIbWg
⭢ Rode VideoMicPro+: amzn.to/2KxqFRO
⭢ BOYA BY-M1 3.5mm Electret Condenser Microphone: amzn.to/2x0T8MC
⭢ Fifine Metal Condenser Recording Microphone USB: amzn.to/2s4Y0e7
⭢ Bonlux 40w 5,500 Kelvin LED Bulbs: amzn.to/2mGyzNv
⭢ Neewer 176 Dimmable LED Pannel: amzn.to/2S0DB5q
DISCLAIMER: This video and description contains Amazon Affiliate links, which means that if you
click on one of the product links, my channel will receive a small commission at no extra cost to you.
Thank You For All Of The Continued Support By Subscribing, Liking, Sharing, Clicking The Bell!
If you enjoy my content and would like to help support my channel, please consider checking out: www.paypal.me/HelpfulLockPicker
Your fan-funded support will go directly to helping improve the quality of my content. Giving back to the lock sport community is at the heart of my channel, your support will directly help increase the frequency and value of my giveaways. If you would like to contribute items to my giveaways please contact me via email at: Contact.HelpfulLockPicker@gmail.com
Thank You For Again For All Of The Support!
Thank you for checking out this video! If you have any questions or suggestions please leave them in in the comments below.
If you liked this video and you would like to see more like it, please subscribe, and as always I hope you have a great day!
#HelpfulLockPicker #LockPicking #LockSport

Пікірлер: 144

@angelinthecenterfold 8 күн бұрын

Damn i just got a lishi off red team tools i had no idea they threw in that spacer. The spacer acting as shoulder honestly rocks! Great vid breaking it down.

@luciferslettuce 2 жыл бұрын

Great video, it was very informative and I really enjoyed it!

@HelpfulLockPicker 2 жыл бұрын

Thank you for the kind words

@roysammons2445 2 жыл бұрын

Thanks for sharing this HLP. What a simple but clever idea.

@HelpfulLockPicker 2 жыл бұрын

Thanks for checking it out. I think it's a pretty cool idea as well

@luislozano7947 2 жыл бұрын

It’s not needed. Check this video out. kzfaq.info/get/bejne/fb6pqNervtGWcWg.html

@urgencylockout 25 күн бұрын

Awesome!!

@R34P3RLocks 2 жыл бұрын

Very nice video 👏, very informative with a great demonstration. Thanks for taking the time to show such a nice addition for lishis. Take care my friend 🔐.

@HelpfulLockPicker 2 жыл бұрын

Thanks for checking it out! It's a fun new addition to the Lishi family

@Dpjohnson83 Жыл бұрын

No need for spacer just start at the 2nd pin position works every time for me

@HelpfulLockPicker Жыл бұрын

Thank you for sharing your experience

@user-dn1xc9el9p 6 ай бұрын

Hi I am a beginner, the locks you have shown are American , will the six pin Lishi style Yale 6B for a Euro locks be able to pick a 5 pin lock as in your excellent video. Thank Michael

@jfilm7466 9 ай бұрын

What do you recommend for the European lock sporters?

@raymondrouthier3920 Жыл бұрын

Good job

@HelpfulLockPicker Жыл бұрын

Thanks

@stevenlowel486 2 жыл бұрын

Great video, as always! I've been using the kwikset 6pin Lishi tool on 5 pin locks with no problem and same with the schlage 6 pin on 5 pins, without any spacer because I didn't know there was one! Nevertheless, it seems like I've been successful opening 5 and 6 pin locks, almost every time! The American lock Lishi tool I'm not having great luck with but, I still can't pick American locks either! I'm hoping once I feel the tolerances while picking, I'll have much more success with the Lishi am tool! Any suggestions appreciated!

@HelpfulLockPicker 2 жыл бұрын

I feel the padlock ones are more difficult to use. For me, as long as it decodes the lock I'm happy

@notanaz5976 2 жыл бұрын

@@HelpfulLockPicker Hi Mr , can you please confirm if it works with CISA 285-84 ?

@Fredengle Жыл бұрын

Hi Steve these picks are getting more than I would hope to pay so are you saying my 6 pin pick will be fine on a 5 pin lock with out the spacer ( I mean if I am already poor would you say the spacer is a waste of money ? and the money would be better put towards something like food etc ?) ? thank you for your response!!!

@Fredengle Жыл бұрын

@@HelpfulLockPicker my question to you is based on what I have read the sc4 and kw5 will work in most locks? So it seems if I have limited space those are the 2 to get but may be I should also get the left version s in case it feels more natural to pick on the other side I would imagine it's the same thing a accept every things is on the other side? Thoughts please thank you

@Fredengle Жыл бұрын

so got a question for you if my frined got locked( out of house ) do you think it would be more easy on the budget if I am able to pick the lock get them in and they just install a new door knob? thoughts please thank you

@HelpfulLockPicker Жыл бұрын

It is cost effective to pick a lock and then make a key to it. There is usually not a need to replace the whole thing

@lunskilledl 2 жыл бұрын

Hi gotten myself a NSN14, realise its kinda big for normal locks (i know its for a car lock)... i am new to this lock picking hobby. And advice what to get?

@HelpfulLockPicker 2 жыл бұрын

For lishi stuff I would check out boredlockpicker and russej02 (same person)

@letsdiyeverything8010 2 жыл бұрын

Thanks for the great video! Your content has been super helpful. Do you know if a different length spacer is needed for the KW5 Lishi? or does this same spacer work for both? I've got some PETG ready to go, and the ender3V2 hot! thanks again!

@HelpfulLockPicker 2 жыл бұрын

I am not sure if I have tried if I am honest. Any luck on your end?

@letsdiyeverything8010 2 жыл бұрын

@@HelpfulLockPicker yeah I purchased a SC4 and KW5 and the same spacer does in fact work for both

@luislozano7947 2 жыл бұрын

@@letsdiyeverything8010 You don’t need any spacers Thomas. Just insert the Lishi KW5 or SC4 all the way in as normal. With the spacer, you don’t pick #1 pin, but you pick 2-6 pins. Without a spacer, you basically do same, except you don’t pick pin 6, but you pick 1-5. Don’t need spacer and don’t need to back out the tool either. Check this video out by BosnianBill that shows and explains it better. kzfaq.info/get/bejne/fb6pqNervtGWcWg.html

@southerngearhead3105 Жыл бұрын

Sorry to bother you but I have a question I’m trying to buy one but have no clue what to go with I need one for a rv/motor home camper door no idea what lock they are. United States what are one or two you recommend purchasing for me to try? thanks

@HelpfulLockPicker Жыл бұрын

Figure out what type of key the lock takes and take it from there. Wafer locks can be impression easily.

@shaungrant5259 2 жыл бұрын

I was all excited for mine to arrive, it’s to thick for all my locks. Do you get a smaller one for padlocks etc?

@HelpfulLockPicker 2 жыл бұрын

You need to get one for each individual keyway

@shaungrant5259 2 жыл бұрын

@@HelpfulLockPicker Thank you for your reply, appreciated. Can you please tell me which one would fit the standard size in U.K.? I was playing about with picking during the first lockdown, fancied trying these out. Thanks.

@petermackichan9762 Жыл бұрын

Love your videos. Just so I'm clear, Kw 4 will do 6 pin, Kw4 with spacer will do 5 pin,Kw 1 will decode (but not pick) Kwikset Smartkey but Kw 5 will not, Sc 20 will do all Schlage keyways and MC 2/3 will pick Master padlocks but is not the best. It will decode an open one though. So would a KW4,KW1 with spacer,SC2 and Mc2/3 be a good mix? Thanks..Peter

@HelpfulLockPicker 11 ай бұрын

Personally it is better to get the tool for the keyway. The spacers can be helpful but it is better to get the right tool for the right job

@j.gabriel8573 2 жыл бұрын

I've actually used a KW5 and a KW1 lock and it works fine just backed it out one position I haven't tried the SC4 in an SC1 but I imagine it will Have the same results and work out fine. Great info and did not know about the 3D printable piece Awesome information my friend. I hope your classes are going well and everything in your life sir. Stay safe, well, and sane👍🦾

@HelpfulLockPicker 2 жыл бұрын

Thanks! I enjoy this new approach. I hope all is well with you

@j.gabriel8573 2 жыл бұрын

@@HelpfulLockPicker It is going well and if you're still interested in one of my challenge locks I will gladly build you one sir. You have been on my list for one but I want to make sure that you do want it. I know that you mentioned you really don't do challenge locks and if you do not want one that is fine with me I will not be heartbroken or upset that just means that's another one off the list. I still pick when I can I've got a load of locks that have been sent to me that I need to go through but between work life and building CL's I have to do it in moderation a little bit here and there. Actually I'm about to go home and work on some pin ideas to add in some of my CL's that I will be putting together and sending out. I think it kind of like building challenge locks a little bit more than picking them.

@luislozano7947 2 жыл бұрын

@@j.gabriel8573 You don’t need a spacer or to back out the Lishi KW5 or SC4 in a 5 pin. Insert the Lishi all the way in as normal, and instead of making the #1 pin useless, as when using the spacer, all you have to do is not pick the #6 pin. Here is a link to BosnianBill’s use of it clearly. He’s not using a spacer or backing out the Lishi at all. Enjoy! kzfaq.info/get/bejne/fb6pqNervtGWcWg.html

@eagleland1407 2 ай бұрын

@@HelpfulLockPicker⁠ What TYPE of Lishi to use for DAF turkish Cylinder single row 6 pins? This: www.google.com/imgres?imgurl=https%3A%2F%2Fstatic.ticimax.cloud%2F9504%2Fuploads%2Furunresimleri%2Fbuyuk%2Fkilitlerdaf-kilit-kilit-gobegi-emniyet-f56b91.png&tbnid=ghPZl_2sCBCvOM&vet=1&imgrefurl=https%3A%2F%2F23kmc.copernicuscenter.edu.pl%2Fdaf-kilit-ileti%25C5%259Fim-k.html&docid=TTMChgE7Jg9pgM&w=1200&h=758&itg=1&hl=en-us&source=sh%2Fx%2Fim%2Fm4%2F3&kgs=39c35414eacf0021&shem=abc

@Fredengle Жыл бұрын

got a new question for you is a left handed pick likely a waste of money I mean it seems that most lock turn clock wise is that correct thank you

@HelpfulLockPicker Жыл бұрын

It can be helpful out in the field for certain situations

@GAMESTERVISION Жыл бұрын

I got 5 and 6 of both sc and kw. I figured might as well

@HelpfulLockPicker Жыл бұрын

Thank you for sharing

@faquir885 4 ай бұрын

hello, thank you so much, please i realy do not understand about many tolls of lishi, is it one lishy with your solution can unluck all locks ?

@SheikhItalabowt 15 күн бұрын

No he's basically demonstrating how you can use a 6 pin model to unlock the five pin locks as well using this spacer which basically stops the pick being too long but it still has to be the same keeway so for example an SC1 and SC4 you can use the SC4 to do the SC1 and the SC4.

@chriscapune7873 2 жыл бұрын

Very cool stand off!!!😀 Will save money and that is a good thing😀 Stay safe my friend 🐾🐈🐈‍⬛🐾🇺🇸👏👏👏👏

@HelpfulLockPicker 2 жыл бұрын

Thanks Chris

@jessbright9597 Жыл бұрын

I have a RUKO padlock/Assa Abloy which is the best one for that?

@HelpfulLockPicker Жыл бұрын

Neither. You need the exact Lishi for the keyway

@kkma7902 11 ай бұрын

I can't open any lock Even with this I'm so disappointed and frustrated. How much tension should i be using on this??? I can't tell if I'm using too much or too little ever please help😢😢😢😢

@emapau77 Жыл бұрын

Hello, great video !! How do I know when a lock is a 6 pin or a 5 pin please? Is there a way of knowing before trying to pick them? Thanks

@stevenhogan6019 Жыл бұрын

Not sure about Schlage locks, but with kwikset, u can tell it’s a 6 pin if there’s a square at the top of the key way (keyhole). If there’s no square it’s a 5 pin

@HelpfulLockPicker Жыл бұрын

@thomascoker7703 Жыл бұрын

When in the door not in vise. How do you tell the number of pins? In the field you also get crusty binded tight punning even with lock lube. People abuse thier locks and none open that easily.

@HelpfulLockPicker 11 ай бұрын

You can count them with your pick

@art0s819 2 ай бұрын

so why not just not use the 6th în and use it as a normal 5 pin ? (i'm new to this lol)

@jaycree7583 2 жыл бұрын

What picks would cover most door (home) encountered in America ?

@HelpfulLockPicker 2 жыл бұрын

Kwikset and Schlage are most common

@Westhelockpicker 2 жыл бұрын

I wish they would of came out before I bought them lol. Hey can you get the Lockwood's Lishi?

@HelpfulLockPicker 2 жыл бұрын

Thanks for checking it out. I haven't checked out a Lockwood Lishi

@Westhelockpicker 2 жыл бұрын

@@HelpfulLockPicker well let me know if you can get one. I'll send you a money order then you can buy it and send it to me

@randyyaple3587 9 ай бұрын

I can't get it in the key all the way in why

@norbertotiu4622 2 жыл бұрын

Can we use the pick in any door knob brand?

@HelpfulLockPicker 2 жыл бұрын

You need the specific Lishi tool for the specific profile of the lock. It is not universal

@DieselDoktor 2 жыл бұрын

Love your videos bro. I’d like to hear your opinion on the sc-1 vs sc-4 vs sc20.

@HelpfulLockPicker 2 жыл бұрын

SC1 is most practical. SC4 is more versatile but I don't like using on 5 pin locks. I haven't used an SC20. In theory having one that fits all the keyways would be ideal but I haven't had any chance to use one.

@DieselDoktor 2 жыл бұрын

@@HelpfulLockPicker right on, lol yea, I got the SC20 recently and haven’t found one it won’t work on yet. (Granted I’ve only tried it in like three locks lol) Works great for my sparrows practice locks.

@pavingos 2 жыл бұрын

What model is used for "Ruko ASSA ABLOY" locks used in DK? 6 PINS

@HelpfulLockPicker 2 жыл бұрын

I don't think there is one made for that

@capdeoie Жыл бұрын

hello, how can I order this key with 6 pins? send me the link too, in Europe

@wardogdauwdd3020 Жыл бұрын

Is there a way I can only buy one of these and use them to decode 90 percent of locks instead of having to buy one for each different type of lock company

@HelpfulLockPicker Жыл бұрын

@billingslocksmith Ай бұрын

Thank you for the information. #Billingslocksmth

@BrianMcElwain 2 жыл бұрын

I found that if you are using a 6 pin lishi in a 5 pin lock with the standoff spacer then you do not want to try and actuate it with the lishi once it's picked. If the hardware isn't smoothly working you can damage the base of the blade trying to turn it.

@HelpfulLockPicker 2 жыл бұрын

Thank you for sharing

@CarAngTube Жыл бұрын

@@HelpfulLockPicker can I buy a spacer since I do not have the ability to do a 3D printing. Never done that before and have no idea where to go get that done.

@jaredneaves7007 Жыл бұрын

@@CarAngTube yes from red team tools

@dugy40 2 ай бұрын

I print these.

@AlexanderSchmidt-vn3te Жыл бұрын

Can i use lishi for european cylinder, too ?

@HelpfulLockPicker Жыл бұрын

If you have a Lishi designed for the keyway

@curtiskwetey Жыл бұрын

Hi can this pick a grade 2 cylinder multi lock

@HelpfulLockPicker Жыл бұрын

This can pick the lock for which keyway it is designed for

@MaGo-Malmo Жыл бұрын

whats the diffrent bethven sc4 and kw5

@HelpfulLockPicker Жыл бұрын

They take a completely different key

@king69104 2 жыл бұрын

Know where I can buy one that fits the KW5? Thanks in advance

@HelpfulLockPicker 2 жыл бұрын

Google Lishi and you can find their distributors

@letsdiyeverything8010 2 жыл бұрын

@@HelpfulLockPicker I think he was talking about the spacer. I was wondering the same thing... Does this spacer work for both the SC4 and the KW5 Lishis? or would I need a separate length spacer for the KW5 Lishi?

@luislozano7947 2 жыл бұрын

You don’t need any spacers. Just insert the Lishi KW5 or SC4 all the way in as normal. With the spacer, you don’t pick #1 pin, but you pick 2-6 pins. Without a spacer, you basically do same, except you don’t pick pin 6, but you pick 1-5. Don’t need spacer and don’t need to back out the tool either. Check this video out by BosnianBill that shows and explains it better. kzfaq.info/get/bejne/fb6pqNervtGWcWg.html

@davidweild6235 2 жыл бұрын

Will these work on euro cylinders?

@HelpfulLockPicker 2 жыл бұрын

If your cylinder matches the keyway

@brucemccready682 2 жыл бұрын

HelpfulLockPicker to

@XDXxanimex Жыл бұрын

Can you lock it as well ? Not only unlock with Lishi?

@HelpfulLockPicker Жыл бұрын

Yes. You can pick bother clockwise and counter clockwise so you could do both

@dadangsupra1438 Жыл бұрын

Hi where I can buy that spacer..? Thanks

@HelpfulLockPicker Жыл бұрын

Read the video description

@anonimuspr23revolution9 2 жыл бұрын

What lishi work on master lock 5 pin padlocks

@HelpfulLockPicker 2 жыл бұрын

I think they only have the 4 pin currently

@dansal938 Жыл бұрын

Where can I buy the spacer? Is there a link?

@HelpfulLockPicker Жыл бұрын

Yes, in video description

@landcruiser9341 2 жыл бұрын

I WANT TO FIND A TOYOTA WIGO, RUSH, AVANZA DOOR Unlock Tool. PLEASE KNOW THE NAME OF TYPE OF LISHI? THANKS A LOT

@HelpfulLockPicker 2 жыл бұрын

Thanks for sharing

@yusufsheikh1 2 жыл бұрын

Hi there, can you please make a video on how to pick Euro Cylinder locks using a Lishi Tool? I dont know which tool to purchase for Euro Cylinder locks. Thank you very much :).

@HelpfulLockPicker 2 жыл бұрын

You need the lishi tool for the specific keyway

@yusufsheikh1 2 жыл бұрын

@@HelpfulLockPicker So how do you find out which lishi tool you need for a specific keyway. Also, can a SC20 or SC4 fit in a standard 5 pin or 6 pin lock? :)

@LelleKidd Жыл бұрын

There are no Lishi Tools for euro-locks, as there are basically hundreds of different keyways in Europe.

@piad2102 2 жыл бұрын

"One Pick to " click " them all, One Pick to set them , One Pick to false set them all and in the darkness open them."

@HelpfulLockPicker 2 жыл бұрын

Thanks for sharing

@swedman1294 2 жыл бұрын

Where can u buy a spacer from pleas tell

@HelpfulLockPicker 2 жыл бұрын

Look up my video I did on the spacer and I believe there should be a link in that video

@luislozano7947 2 жыл бұрын

@peteringram8804 2 жыл бұрын

Hi there, I wonder if you can help me. I work for a company that has hundreds of DAF lorries. So I brought a Lishi pick for the DAF lorry. The problem is all the lorry keys have teeth on both sides, whereas the Lishi pick looks like it is for keys with teeth on one side. We have lorries from all different years and all the keys are one-sided! Could you help me with this?

@HelpfulLockPicker 2 жыл бұрын

Ask Bored Lock Picker he is much better with Lishi

@gregspoks6545 2 жыл бұрын

Think you use the cy24

@lesrinehart933 10 ай бұрын

Just start on 2

@DanteKali Жыл бұрын

Does it also work on European locks?

@HelpfulLockPicker Жыл бұрын

If you have the lishi to fit the keyway it would

@LelleKidd Жыл бұрын

There are basically hundreds of different keyways in Europe. There are not several hundreds of different Lishi Tools...

@rodmaclennan3437 Жыл бұрын

Will a lishi open euro cylenders

@HelpfulLockPicker Жыл бұрын

Lishi only opens the type of keyway which the tool is made for.

@rodmaclennan3437 Жыл бұрын

Are there any which would pick euro cylenders used in the UK.. thankyou

@TheBaltimoreDude Жыл бұрын

You can relatively easy do this without a spacer, but it's a lot easier with a spacer, and will speed time up

@HelpfulLockPicker 11 ай бұрын

Thank you for sharing

@828usa 6 ай бұрын

I use a 6pin without a spacer and it works just fine. I do not use any spacer at all. It is not neccessary!

@xeixr5511 2 жыл бұрын

Why is my lishi tool small?

@HelpfulLockPicker 2 жыл бұрын

It would not make sense if it were larger.

@dugy40 3 ай бұрын

I have a lot of these already printed. let me know if u want one

@Twobarpsi 2 жыл бұрын

I would buy both. That little adapter could be easily lost.

@HelpfulLockPicker 2 жыл бұрын

I prefer both but this is a reasonable option

@kracka117 2 жыл бұрын

@@HelpfulLockPicker Im more worried about more stress on the pick since you are not using the proper shoulder that is supposed to take all the stress of tension.

@luislozano7947 2 жыл бұрын

@@kracka117 You don’t need any spacers. Just insert the Lishi KW5 or SC4 all the way in as normal. With the spacer, you don’t pick #1 pin, but you pick 2-6 pins. Without a spacer, you basically do same, except you don’t pick pin 6, but you pick 1-5. Don’t need spacer and don’t need to back out the tool either. Check this video out by BosnianBill that shows and explains it better. kzfaq.info/get/bejne/fb6pqNervtGWcWg.html

@luislozano7947 2 жыл бұрын

@Twobarpsi You don’t need any spacers Thomas. Just insert the Lishi KW5 or SC4 all the way in as normal. With the spacer, you don’t pick #1 pin, but you pick 2-6 pins. Without a spacer, you basically do same, except you don’t pick pin 6, but you pick 1-5. Don’t need spacer and don’t need to back out the tool either. Check this video out by BosnianBill that shows and explains it better. kzfaq.info/get/bejne/fb6pqNervtGWcWg.html

@Twobarpsi 2 жыл бұрын

@@luislozano7947 thanks!👍