I just used this method today and the instructions were excellent. If I would have had to rely on the instructions that came with the kit I would have dug a hole to China and tossed the whole thing in it. Funny guy too. Thanks

I just want to thank you for this invaluable information - I just purchased the exact same unit and was scratching my head over the almost completely useless instructions (even Ikea instructions seem 100x clearer), very poorly written, or should I say translated... So "thank you"! It all makes sense now after watching you do it. And BTW, I laughed thru this entire video at your creative use of the same made-up names of the major parts of this unit that I used while trying to figure it out ("thingy", "whatcha-ma-call-it", etc.) only I wasn't nearly as calm about it as you were! Much appreciated!

hah! I am the .001% of the people out there who needed this instruction video. Very helpful step by step. Thank you.

I got these things with no instructions so you saved me a ton of time. Thanks😊

A quick visit to KZfaq University saved me loads of time. Thank you, professor!

Thanks for taking the time to do this. Our warehouse needs to start banding pallets and I was trying to make sense of the process & tools. This was just what I was looking for. Thank you 👍

Absolutely useful. I wasn’t sure if this is what I had to buy for my needs. Demonstration helps. Thanks man.

Thank you for the time and patience to simplify this for me. God bless you!!

Fantastic, I bought a similar setup last year, was confused cause it would not tighten enough, so set it aside until I watched your video today. I am now a strapping fool. Just needed a visual, and the instructions were worse than useless. THANKS Again.

I just bought one of these things and the instructions ARE AWFUL!!!! Just like you said and the commenters on Amazon stated. Rather then fight this things, I looked on KZfaq and your video was great! Thank you!

Thank you, i love the commentary.

thank you...I have to pack a large 6 foot vanity to be returned and will follow your instructions.

Thank you, my boss was showing me how to do it today, well he's left handed, he does it upside down and backwards...it's been awhile since I've banded any material, but you reminded me how, thanks again.

Thanks for doing this vid, the instructions included with the product were as foggy as they were in pictures.

This is absolutely hilarious Chris. You did a great job. Thanks so much.

Thank you so much for making this video!! You helped me tremendously, and I love your technical names for everything. You made it fun. 😀

This is great. I often have to ship heavy items back for warranty refurbs/inspections/storage and tape just doesn't cut it when the thing is 80kg boxed. Was really good to see how this all works and what exactly I need (rather than what someone might try to tell me I need so I buy their old inventory lol). Thanks pal.

This is the exact I was exactly looking for. Thank you for making it!!

THANK YOU!!! After 1 hour trying to follow their directions. Got it now!

Excellent I also was struggling with the instructions. Thanks for your great video

This video was highly relevant to me today

Not dumb at all! You just saved my life… thanks for the video 🙏🏼

You did great Chris .... Thanks 🙏🏻

Wonderfully helpful! Thank you so much!

Thank you so much for doing that video, now I know how to use the strapping tool. You are awesome 👏

Thank you! Very helpful, my coworkers and I spent more time than this video takes trying to figure it out/remember how

Hey thanks. This really helped me I couldn’t figure out how the use the thing. Thanks again

Very relevant and helpful! Thank you!

Thanks for a nice demo! Its was very helpfull.

Very nice. I just bought this tool and will be using it as shown in the video. Thx

Thank you much. Simple and to the point

Got it! I bought one in a carboot i found it very easy to use Great video

Thanks for doing this video. Very helpful.

Thank you so much. Is was very helpful.

Much needed video thank you.

Thanks very helpful

Thank you, Very useful to me

Your commentary made this video worth watching lol.

Thanks very helpful!!

Thank you, really useful.

Thanks to your video, my urge to blow up the tool has passed. Thank you!

Thanks for the video...such a funny guy !! haha

Thanks for helping

Great video interesting I have followed your video but when i cut the tape ends up v loose what ami doing wrong

Thank you so much.

I love the video

Thank you for sharing. Would save a lot of time! #2021rmb

Perfect

Finally got it and I still hate this thing but,thanks for the video

thank you ,!

Great video for mechanicals like me :).

Corrections: 1: After you put end 1 into the keeper, open the handle to the upright position. This opens up the cutter. If you leave the handle down, you'll never get the strap through the cutter. 2: There is no need to put the crimp on at the beginning. After you properly tension the strap, you can let go of the tool and put your crimp on. 3: No need to cut the strap to length 1st. Just pull enough strap out to go around your pallet/box and use that end as the 1st end. Also, be very careful with the strap, especially the nylon type, as it you can get the worst paper cut of your life!

Do you still have the kit and are you interested in selling the remaining materials with the tools?

I just bought one and mine came without any Instructions 😮

Sitio de ventas

starts 2:05

Clip

The angle of this video is not as good as the other two I watched especially when you need to insert the plastic straps inside the red thingy.

That was the funniest non relevant to 99% of people video I have ever seen :)

thanks bro