How to use a spring compressor on a BMW or MINI strut assembly

Рет қаралды 188,744

Күн бұрын

BLOG ARTICLE: blog.bavauto.com/14362
"Like" us on Facebook - / bavarianautosport
"Follow" us on Twitter - / bavauto
"Subscribe" to us on KZfaq - / bavarianauto
Visit our online store - www.bavauto.com/
All of the items shown in these videos are available in our online store at www.bavauto.com/. Need additional tech help? Please visit our tech blog for thousands of Tech and DIY BMW and MINI articles at: blog.bavauto.com/
---
This DIY video will show you how to properly use a spring compressor tool to disassemble a front strut assembly or a rear coil-over shock and spring assembly that would commonly be used on MINIs and BMWs. We need to perform the spring compression when replacing shocks, struts or springs on the front of all BMWs and MINIS as well as the rear on most 5, 6, 7, 8, Z and X models and some 3-series models that have the spring mounted over the shock (coil-over).
We will be working with a front strut assembly (shock and spring) from a 2004 325ci E46 3-series. The exact procedure, as shown, would be applicable to all E46 models (3-series 99-05 - 323i. 323ci. 325i. 325ci. 325xi. 328i. 328ci. 330i, 330ci, 330xi, M3). However, the general procedure can be applied to all BMW or MINI front strut assemblies. This general procedure can also be applied to the rear coil-over type shock and spring assemblies, as noted above.
We will be using the BavAuto universal spring compressor tool. Use this video in conjunction with our various DIYs and how-to videos on shock, strut and spring replacement for various BMW and MINI chassis and models.
PARTS USED:
• New shocks/struts (Bilstein, Koni, Sachs, etc.)
• New Shock install kits (compression bumpers, dust shields, spring pads, etc.)
• New upper strut and shock mounts
TOOLS USED:
• Bentley Repair Manual
* BavAuto spring compressor tool
• 13mm through 18mm ½"drive socket & ratchet set with various extensions
• 4mm through 8mm Allen keys or bits (for ratchet use)
• 13mm through 18mm combination wrench set
• Assorted flat and Phillips screwdrivers
PROCEDURE:
1) Remove the front strut assembly from the vehicle, using the applicable Bentley repair manual, BavAuto DIY instructions or BavAuto how-to video.
2) Determine which spring jaws are appropriate for the application. Assemble the jaws to the tool. Here, we have used the large jaws.
3) Assemble the spring compressor tool to the strut/spring assembly. It is preferable to attach the upper and lower jaws to the spring coils. However, if the coils that can be used do not allow enough compression for disassembly, the upper jaw can be affixed to the upper spring perch. In either case, BE SURE that the lock tangs on the jaws are securely wrapped around the coil or the spring perch. If this cannot be achieved, DO NOT attempt to compress the spring.
4) Use a socket and ratchet on the tool's screw rack to compress the spring. Compress the spring until it is loose between the spring perches.
5) Remove the upper shock mount nut.
6) Remove the upper mount and note any washers that are in place on the shock shaft, for future use.
7) If the spring plate was not used for the upper jaw of the compressor, remove the spring plate. At this point the shock can also be removed from the spring.
8) If the upper spring perch was used for the seating of the upper compressor jaw, decompress the spring by "unwinding" the compressor's screw rack.
9) Install a new upper rubber spring seat to the upper perch and a new lower rubber spring seat to the new shock's lower spring perch.
10) install a new compression bumper and dust protection tube to the new shock.
11) Assemble the upper perch, spring and new shock, by compressing the spring in the same manner as was used for disassembly.
12) Install the new upper mount along with any washers that were removed when disassembled.
13) Install the upper nut, using the same tools as were used for removal (to hold the shock shaft and tighten the nut). DO NOT USE AN AIR GUN to tighten the upper nut.
14) Slowly detension the compressor tool while aligning the upper and lower spring ends with the spring seats and perches.
15) When fully detensioned, remove the spring compressor tool.
16) The strut or rear coil-over assembly is now ready to install into the vehicle.
--------
All products noted in this video can be purchased in our online store, www.bavauto.com/, 24 hours a day, 7 days a week. You are also welcome to e-mail us at info@bavauto.com or call into our headquarters and speak to our knowledgeable advisors at (800) 535-2002 (Mon.-Thurs. 8AM to 9PM EST, Fri. 8AM to 7PM EST, and Sat. 9AM to 4PM EST).

Пікірлер: 105

@authenthuse5165 2 жыл бұрын

This was a life saver. After a couple of local shops failed to press out the springs for my e60 xdrive, I bought this tool and did both front struts in under half hour using Otto's technique to press over the top cup! Thank you!!

@tonys4751 5 жыл бұрын

I remembered you could by the strut w/ springs already installed from Bavarian Autosport. Went to their website and learned they are no longer in business. Thank you for your DYI video's - you allowed me to send my kid to college without selling my bimmers. He graduated this year. Thank you and wish you all the best.

@martymeyer4125 4 жыл бұрын

ECS Tuning bought them. Another great supplier.

@tvguy12346 2 жыл бұрын

I miss Otto and his videos 😥

@warped-sliderule 2 жыл бұрын

Damn, miss the gang at Bavauto! They were 40 minutes away and always helpful. "Otto" and I both had E30's at the time, and traded stories...

@douglaselser2440 Жыл бұрын

Really, really appreciate this and all the other videos you do. Extremely thorough and you don't assume "common knowledge" that other videos do. I was struggling with re-assembling mine, as I was dumb enough to decompress the spring when I took it off. This helped enormously. Thank you.

@S14AA 9 ай бұрын

good video the short travel and low number of coils make them harder then most

@pkelly20091 7 жыл бұрын

This guy has a very good ability for explaining things clearly, well done .

@FloppyJedi 8 жыл бұрын

Thanks for your patience, this is the kind of spoonfeedingtutorial i like.

@bogdanradulescu870 3 жыл бұрын

07:35 This is your compression bumper and this is the DAS BOOT :) thnk's for the video.

@dtmfool789 8 жыл бұрын

that spark plug Allen wrench tip is so helpful!!! great vids keep them coming.

@austinmoehring6110 8 жыл бұрын

Outstanding video. Always a pleasure to watch your work.

@hemirt7860 6 жыл бұрын

These videos are really helpful! Thanks 🙏

@bavarianautosport 11 жыл бұрын

Yes, the kit has 2-each of three different spring clamps and will work with various different makes and models. We do like it! We have the kit available in our online store at bavauto.com

@fenianbhoy100 9 жыл бұрын

Excellent video.. Very good step by step instructions.. Really helpful thanks ;-)

@Theone69ing 4 жыл бұрын

Really useful video 👍🏻

@bavarianautosport 10 жыл бұрын

We have a full step-by-step photo DIY on the VANOS removal and rebuild of our tech blog at blog.bavauto.com ... search for VANOS DIY in the blog search box.

@ruhul3902 3 жыл бұрын

Thanks, i didn't know you had to compress the mount and spring toghther, thats why i failed. Thanks will sort it now

@NorthernChev 8 жыл бұрын

ATTENTION XI OWNERS: The procedure is the same. The top strut MOUNTS are NOT. The strut MOUNTS for, say a 2007 328XI are much shorter than the standard strut MOUNTS shown here. Make sure you know this when ordering your parts. Bavarian Autosport DID have the correct MOUNTS in stock but it took quite a bit of effort to make sure they were the right ones. Thankfully Allen at BA took the time to figure it out for me.

@michaelvanna8982 Жыл бұрын

Thank you. For lowering spring, is there a need to shave the bumpstop?..like if spring is 1 inch lower, then cut 1 inch as well on bumpstop? Thanks again♥️

@Gutsmagoria 2 жыл бұрын

Hi, Auto here for Bavarian Ottosport.

@ThunderbirdRocket 6 ай бұрын

Yeah that’s iconic

@edwardjablonski621 8 жыл бұрын

Otto (and bavauto), I first want to thank you for producing as many videos with as many DIYs as you all do. They have inspired me to take on projects I would never have attempted without at least some visual guidance on what to do. They have also shown me the value of utilizing the correct tools for any given job versus trying to improvise with whatever happens to be available. With that said; this is going to come across as nit-picky, but the process of seating the upper spring rubber to the spring plate was not shown (when you bring back the spring assembly the new rubber has vanished from the table and is already installed). I assume the process involves decompressing the spring, removing it, installing the top rubber, and then re-compressing the spring. But is that accurate, and is there anything else I should know?

@Jo-hannson 6 жыл бұрын

thank you!!! just changed my struts :)))

@fenianbhoy100 9 жыл бұрын

Also using a spark plug socket comes in very handy for these particular applications.. Good job!

@bavarianautosport 9 жыл бұрын

Correct, you are! That's just what we did use.

@raym316 11 жыл бұрын

U video are very helpful thanks

@dilyanpetrov1400 8 жыл бұрын

Great video! Just one small question - what is the other method of aligning the spring to the spring plate (respectfully lower/upper) besides, where the old one was?

@sammynice6253 2 жыл бұрын

How do you compress the coils on the f30? They have a different gasket

@julianfisher6373 2 жыл бұрын

My point exactly !!

@KozmikEl7 7 жыл бұрын

thanks very informative!

@BWMA65 9 жыл бұрын

Good Job!!!!

@martinmoffitt4702 6 жыл бұрын

Does that spring compressor tool work well with Sport springs from an M suspension on an e85?? I have all new parts to build up totally new strut assy. Should I send it out or give it a whirl??

@XtaticVideo 9 жыл бұрын

thanks as always)

@STREETFIGHTER50 6 жыл бұрын

So would this type of spring compressor be better than the typical 2-piece PITA spring compressor? I’m working on. 2006 X3 non-sport

@malp6280 8 жыл бұрын

I'm soo glad I watched this, or I'd still 've trying to get the spring/shocker put back together 😱😱

@sammynice6253 2 жыл бұрын

Nightmare

@sammynice6253 2 жыл бұрын

Still trying on the f30

@howardjprice 2 жыл бұрын

@@sammynice6253 Did you find a solution? I'm on an F30 and the top mount is not "split" like in the video so I am unable to take to safety precaution suggested on engaging the cradle in the slot underneath the mount. It is a borrowed compressor and I can't therefore drill holes and use the pips on the mount that engage in the inner wing.

@BrassFromThePast 10 жыл бұрын

Hi Otto, Enjoy your videos, really got me interested in doing some work on my BMW. A quick comment....it would be great it you could do a video on jacking up the different bmw series cars. I am very confused from all the blogs, and find that pictures often don't help much. I did see your article from spring 2008...but I think a video detailing jacking points, and jack stand placement would be beneficial to all! Thanks

@pumpkinpot672 8 жыл бұрын

I may have need to re-torque my strut nut. Is it okay to tighten the top strut nut while the car is on the ground?

@toniocastro5426 8 жыл бұрын

Excellent.

@LynxStarAuto 10 жыл бұрын

Man you are a brave man trusting that tool. At the dealer we never used those. Too many accidents. A mixture of the tool not exactly designed to be mounted on the mount plate, and a fast paced environment. We had a wall mounted unit which is what was used for all chassis application. It was great, fast, and more importantly, safe. Good video though, especially showing the spark plug socket trick. You can use a crows foot, and then torque to spec with a torque wrench. Or cut a box wrench end, and make your own.

@bavarianautosport 10 жыл бұрын

We all have spring compressor envy .... for a nice wall mounted. full fixture unit!

@LynxStarAuto 10 жыл бұрын

haha. Yea there are some nice ones out there.

@e30hop 3 жыл бұрын

I miss bavarian autosport.

@bsouza1675 6 жыл бұрын

How do you replace the top spring rubber pad??

@bavarianautosport 10 жыл бұрын

The spring compressor is universal and comes with three different spring shoes. It should work with most (if not all) strut and coil-over applications.

@bavarianautosport 11 жыл бұрын

Those are the SafeGrip gloves that we offer in our online store. Just go to bavauto.com and search on GLOVES (you will have to enter a year/model before the site will show results).

@n310ea 11 жыл бұрын

Would that spring compressor be good to use on SUV strut springs?

@eddiesgsr 11 жыл бұрын

Can regular spring compressors work or only the type shown here

@adamb50 Жыл бұрын

Where do you find the flat not angled plate for the compressor, because the one that comes with that tool is angled

@Wong32 11 жыл бұрын

im always look for a spring compressor that wont try to kill me, i know this a universal kit made by koch, does it work well with other makes?

@dbkshampoo 11 жыл бұрын

Can you make a video step by step on removing the vanos on 01 BMW 530i...tnx

@retroguitarmaster 11 жыл бұрын

what brand of gloves are those and where can i get them?

@csupakabra4 7 жыл бұрын

It seems like the new top mount had the "dust cap" on. So there are 2 of them on now.

@elora2525 10 жыл бұрын

damn i had the same problem using your strut tool.. never occur to me to put the c clamp on the mount..i used the o clamp design for e46 but for e90 is not good fit the tool is slight bigger inside diameter,it was a pain and nervous cause the strut wanted to tilt hard to access the strut thread

@frankmaggio4328 5 жыл бұрын

I made my own video for the 6 series. I recommend NOT putting the upper clamp on the upper strut plate. You can go just below it clamp it down. Someone else mentioned the same thing in the replies. Buy this tool!!! Personally it's soooo muuuch easier than the $20 Advance Auto/Pep/Autozone threaded rod and hooks. My old hook and threaded rod would twist as the coil would compress. It was nerve racking!!! Bought my clam compressor like the one in the video for $85. Well worth the investment for a 1 time tool!!!!

@MS-we4wi Жыл бұрын

Why not put the clamp on the upper strut plate?

@frankmaggio4328 Жыл бұрын

@M S that's NOT a good technique. The strut plate can move and the spring will pop out. I made a video on my channel on how to it the proper and safe way.

@jasonl5589 8 жыл бұрын

8:03 I like how he say 'in.stall.kit' and points to different components lol

@theleadin 10 жыл бұрын

I'm pretty sure you guys heard of the holden commodore over here in australia! Or Chevrolet in america! Would it be the same process to change the front shocks for the holden commodore? Thanks!!

@bavarianautosport 10 жыл бұрын

The Holden does use a strut type front spring/shock. Very similar to what is shown here. the strut is attached to the hub via two through bolts.

@fotomedia1 10 жыл бұрын

Good video. Is there any way to determine signs if you have a bad shock mount before removing the actual strut/shock? I would hate to buy them and then find out my original ones are still in OK condition after removing the strut/shocks. Of course it's a safer bet to have the new shock mounts during installation and avoid doing the work twice at a later time, but I am on a tight budget since I need to purchase all the struts & shocks at one time with boot sets on my BMW 5 series.

@bavarianautosport 10 жыл бұрын

Visually, cracking in the rubber or the center bearing and the rubber visually pushed upward 9with the weight of the vehicle on it). Other symptoms can be a knocking from the bearing while driving, due to play in the actual bearing. Once the mount is off, you can check for bearing play or grittyness while turning the race, as well as a more complete visual inspection. If you do purchase mounts to have on-hand, and decide not to install them, they are returnable.

@abiwholefoodsimmunovetuk9301 10 жыл бұрын

I have to replace 2003 e46 front shocks... I would like to have original feel to the drive. Not looking to be sportier although perhaps dampener preference would be good? What shocks would you suggest.. ?Blistein Koni etc ?

@bavarianautosport 10 жыл бұрын

For a "back to new" ride, the Sachs shocks will be just like original (Sachs makes the original shocks). www.bavauto.com/se1.asp?dept_id=157

@willytheazn 5 ай бұрын

The spark plug socket got me I never realized

@Mr_PhilS 9 жыл бұрын

You have the Blisteins here but what about Koni FSD on a '04 330ci. Looking on your website products, what FRONT bump stops, dust boots and spring seats are needed to match this? As for the rear, they come with rear dust boots and bump stops, but what about the spring seats in the rear?

@bavarianautosport 9 жыл бұрын

The front Koni shocks use all the original type bump-stops, boots, etc. The front shock install kit includes the stops, boots and spring seats. The E46 rear spring seats are comparatively thick and don't always need to be replaced. However, you can't go wrong by replacing them and having fresh un-compressed rubber. We do offer the rear seats, but they are not shown on our web site. Just give our Advisors a call at 800-535-2002 or email info@bavauto.com.

@fazalabbas 4 жыл бұрын

I cant find this spring compressor at your site. I can find Mercedes-Benz Coil Spring Compressor but this one. Is this out of stock thats why not showing up in your list?

@fazalabbas 4 жыл бұрын

Found it, listed as "Schwaben Strut Spring Compressor Set"

@Himoutdoors Жыл бұрын

I somewhat reluctantly ordered one of these spring compressors. Annoying that the tool should cost as much as two new front struts and springs, but there you go. Using the old clamp and screw type is just unnerving, and it chews up your springs, ruining the painted coating and leaving them open to corrosion almost immediately. £150 is a lot for a non power tool, but it’s the only way. Thanks Otto, hope you’re still spannering away, wherever you are these days.

@bavarianautosport 11 жыл бұрын

While the type shown is very safe and easy to use, any compressor that is designed to be used externally on a strut type assembly can be used.

@howardjprice 2 жыл бұрын

I disagree. My BMW F30 springs are of a much reduced diameter at the ends where they engage on the strut and the top mount compared to the central region and so the threaded bar of a standard spring compressor fouls on the full diameter coils. As such, you can only engage on these full diameter coils and this is not enough length of the spring to compress enough to re-assemble the strut. My problem with the video is my top mount is not of the "split type" and so I have no easy way of stopping the upper cradle from slipping off other than to drill holes in it and use the positioning pips on the upper mount that are used to locate the mount in the inner wing of the car. It is a borrowed spring compressor and so that option is also not available. Nightmare of a "simple" job.

@huedoan8955 10 жыл бұрын

I have a mini cooper 06 type s and it makes a rubber to rubber cork sound on slow turns. I checked the strut mount and it seems to be intact with no visible tears. When the car is on the lift with the front tires off the ground the sound is gone, could this be related to the strut or strut mount?

@bavarianautosport 10 жыл бұрын

It certainly could be the upper mount. We would suggest that you have a helper and try to listen up close as the wheel is turned (assuming it will do this with the vehicle stationary). You should be able to determine if the sound is coming from the upper mount (or someplace else). Listen from the outside (up near the tire and the fender opening) as well as under the hood. You could also run the car up on ramps or onto a ramp-type lift and listen from underneath.

@huedoan8955 10 жыл бұрын

thanks!

@scotcook5 10 жыл бұрын

should you always replace springs with the shocks? Do the springs actually go bad? I would like to upgrade to bilstein shocks but wanted to keep the car stock. All the new springs seem to lower the car.

@bavarianautosport 10 жыл бұрын

Springs are not a required replacement. Only if broken or sagging (one or more sitting lower than they should). The Bilstein HD or Sport will work great with the stock springs.

@nsnorway 4 жыл бұрын

He says the torque setting for the strut nut is generally 25 to 35 foot-pounds, but check the Bentley manual. I did, and it says 32 foot-pounds for internal hexagons, 48 for external hexagons. I mis-read that and used the higher figure despite having internals. Would hate to have to take the whole thing apart. Anyone think the difference between 32 and 48 is big enough that I really need to? Thanks.

@DZEyoyo123 11 жыл бұрын

Probably not. Strut springs on SUV's have thick coils, so you would need a stronger spring compressor like an OTC 7294.

@ZengyMAN 8 жыл бұрын

what if the Allan spot that holds the strut is STRIPPED HOW CAN I TAKE THE THING APART NOW

@rhettkroninger7018 7 жыл бұрын

I know this was 11 months ago but just use some vice grips or channel locks and hold the onto the shaft directly. You're not going to reuse it anyway. just be careful/wary of the spring.

@garrymattix923 10 жыл бұрын

Nice gloves saving your pretty hands for the prom ?

@bavarianautosport 10 жыл бұрын

Otto finally learned to use gloves, a few years ago.

@RVGhostRider 10 жыл бұрын

I tried that very tool on my 04 330Ci Conv and couldn't quite bite into the upper collar all the way. Everything got all distorted. I also tried attaching both top and bottom directly onto the spring and the distortion was even worse. Was afraid it would all explode on me. There's literally tons of energy stored in there and could only imagine the blood and broken bones if something went wrong. Still a ton of tension/pressure at top. Was afraid if I tried to loosen allen nut it would never get back on. After spending tons of hours and $100's on tools and parts, finally letting a mechanic do it.

@bavarianautosport 10 жыл бұрын

Normally, you would want to have the tool's spring seats connected to the actual coils. On some applications, the spring needs to be fully compressed in order to relieve the tension on the mount, due to the shock design. As you noted, there is a great amount of energy stored in the compressed spring. If you are uncomfortable, it's best to err on the side of caution.

@fishodorvagina 10 жыл бұрын

Can you use a universal type strut spring compressor on that strut?

@erickonphoenix 10 жыл бұрын

on BMW you can use any spring compressors as long as they have the locking pins on them. Mercedes requires a special compressor.

@briansmobile1 10 жыл бұрын

***** I have three different styles of spring compressors including an OTC strut tamer Xtreme and it's failing to do the struts on a 2011 335i. The springs could possibly be damaged when the were removed, but I sure wish I had that German one now. when the springs are near fully compressed they bulge on one side and look as though they're about to shoot out!

@briansmobile1 10 жыл бұрын

briansmobile1 I DID get the job done using a screw and hook type compressor in conjunction with the strut tamer Xtreme, but it was NOT "safe" or easy.

@erickonphoenix 10 жыл бұрын

Damn, that's a serious spring compressor.

@bavarianautosport 10 жыл бұрын

Tim Taylor's favorite - Binford 2000 Seriously, though, This type of compressor comes in handy on the applications that require the spring to be near fully compressed.

@marcoac14 10 жыл бұрын

BavarianAuto Have you ever replaced the struts on a BMW F30? The spring is too short and the upper mount is too large and different from that one. The dealer has a spring compressor just like that one and it didn't work! I'm trying to replace my baseline struts/springs with MSport ones.

@erickonphoenix 10 жыл бұрын

Marco Corrêa You may need to use a "bench type" spring compressor. They will completely flatten a spring. But I believe that large floor tool is around $600 so unless you do a lot of spring work or just love to have miscellaneous tools. You might need to take it to a shop that has one.

@marcoac14 10 жыл бұрын

***** Well, I did it. The problem is that the spring has like 2 large coils in the middle and one smaller coil each side. You need to place the compressor supports as far as possible from the center but, as I said, there aren't many coils. It's a PITA! Not even the dealer was able to fit between the two mounts.