How to Use Blender's Sculpting Mask Brush (Tutorial)

Рет қаралды 45,703

Күн бұрын

In this tutorial I will show you how to use Blender's mask brush in the sculpting mode.
● Sculpting Tutorial Playlist: • Blender Sculpting Tuto...
● Finished Alien Sculpt: skfb.ly/oFwv7
● Amazon Drawing Tablet Links:
As an Amazon Associate I earn from qualifying purchases.
• Wacom CTL4100 Intuos Graphics Drawing Tablet:
amzn.to/2H2HG9b
• Huion KAMVAS 20 Drawing Pen Display Graphics Monitor:
amzn.to/3lVNMa7
• Huion Artist Glove for Drawing Tablet:
amzn.to/37gwLDq
• Drawing Tablets on Amazon:
amzn.to/2IIOSYt
● Help support the channel:
• Patreon: / ryankingart
• Gumroad: ryankingart.gumroad.com/
• KZfaq Memberships: kzfaq.infojoin
● Master 3D Sculpting Course (Affiliated Link): academy.cgboost.com/p/master-...
● Timestamps:
0:00 Intro
0:19 3d Setup
0:50 Mask Brush
1:39 Mask Added to Vertices
2:14 Sculpt Around the Mask
2:44 Other Mask Settings
3:15 Invert the Mask
3:44 Hardness Setting
4:16 Pulling Out an Ear
5:22 Pulling Out a Neck
5:50 Sculpting Surface Details
6:44 Expand Mask by Topology
7:31 Closing
_________________________________________________________________________
● My Website Links:
• All links on my about page: ryankingart.wordpress.com/77-2/
• Patreon: / ryankingart
• Gumroad: ryankingart.gumroad.com/
• Artstation: www.artstation.com/ryanking
• Blender Market: blendermarket.com/creators/ry...
• Sketchfab: sketchfab.com/ryankingart
• Website: ryankingart.wordpress.com/
#ryankingart #blendertutorial #blender

Пікірлер: 78

@angustheshort1137 5 ай бұрын

Finally a tutorial on masking that doesn't assume I already know what masking means, and actually uses an example that is realistic to what a beginner would do

@RyanKingArt 5 ай бұрын

glad you like it!

@doko3000 14 күн бұрын

This "paint the shape you want, then invert the mask" technique is brilliant. Thanks for sharing

@RyanKingArt 14 күн бұрын

thanks for watching!

@setonisatomi 23 күн бұрын

Finally, this is the best tutorial I have seen. Much thanks!

@nmlss Жыл бұрын

I've been looking for sculpting mask brush tutorials for a couple of days and found some good tutorials, but not quite what I needed. Then, Ryan appeared and, as always, it was EXACTLY what I was looking for. You're a godsend, man! Thank you so much for sharing your knowledge.

@RyanKingArt Жыл бұрын

glad its helpful!

@ZergRadio 6 ай бұрын

This is by far the nicest technique

@danielbarros8299 Жыл бұрын

I just watched your 100k subscribers video and I must say you deserve it. Love your tutorials and they helped me so much through my 3D journey. Congrats Ryan, God bless you!

@RyanKingArt Жыл бұрын

thank you very much!

@NicoleSummer8 Жыл бұрын

Thanks for the clear and easy understanding explanation !👍🙏🏻💪

@RyanKingArt Жыл бұрын

Glad it was helpful!

@TimmJKD1973 Жыл бұрын

Thank you very much. This was just what i needed in my Blender adventure now.

@RyanKingArt Жыл бұрын

thanks for watching!

Жыл бұрын

Thanks for your tutos !

@RyanKingArt Жыл бұрын

you're welcome!

@leonrose9361 2 ай бұрын

Thank you for this tutorial, I can see this being very useful :)

@RyanKingArt 2 ай бұрын

thanks!

@ZOMBIEHEADSHOTKILLER 9 ай бұрын

wow, i wish i knew about both the mask tool, and the dynotopo setting, earlier, would have been super useful...... defiantly going to be using this in the future.

@RyanKingArt 9 ай бұрын

cool!

@JuanFernandez-ti5bv 7 ай бұрын

thank you Sir for sharing your knowledge in such a didactic way making everything clear while going straight to the topic, +like and keep it up.

@RyanKingArt 7 ай бұрын

glad you like it!

@blenderstuffs Жыл бұрын

Amazing 🤩

@RyanKingArt Жыл бұрын

Thanks 👍‍

@slacknhash Жыл бұрын

I was following a different tutorial that required me to use the mask tool to add some inscriptions to an axehead. Couldn't get it to work. Figured I should step back a bit and look at the mask tool itself so I'd at least know what it was I couldn't do. So while I still can't get it to work, I at least understand the problem better now. Thanks!

@heiro5 20 күн бұрын

Thank you. Another very helpful rundown. I'm wondering if it's possible to set masks from selected faces.

@ATLJB86 Жыл бұрын

Thanks Ryan

@RyanKingArt Жыл бұрын

you are welcome!

@heimirjosefsson510 Жыл бұрын

I see there are more than just me who use GNU/Linux systems for art. Great tutorial, man! I'm loving Blender. It's a whole lot of fun to work with.

@RyanKingArt Жыл бұрын

Thanks for watching! Yes, I use Linux Mint! 👍‍

@heimirjosefsson510 Жыл бұрын

@@RyanKingArt Yeah I noticed on the top. I have Linux Mint XFCE here. Loving it.

@IrocZIV Жыл бұрын

Nice tips

@RyanKingArt Жыл бұрын

Glad you liked it!

@Jhon_SiL_ver Жыл бұрын

Good! ❤

@RyanKingArt Жыл бұрын

Thanks!

@ProDMiner 6 ай бұрын

tysfm! Ive been wondering this for sometime, and seen tutorials were there is heads being scultped, and always seen that dark mask, and realized thats exactly what it was , a "mask"! Also, the dyno topo thing thats what ive been trying to figure out as well, but did njot know how people turned it on. never seen it done, it was like people had it turned on as blender loaded up.

@anthonyhoganson9527 8 ай бұрын

This video is an excellent demonstration of how much you can get done with just the masking tool, and I highly recommend combining it with the info from Blender Secrets "Hard Surface Sculpting Tips" Part 1 and 2. Thanks Ryan!

@RyanKingArt 8 ай бұрын

glad you like it!

@cat9595 Жыл бұрын

Hi sir Ryan you are my favourite teacher ❤️ I love you, I'm from Pakistan 🇵🇰

@RyanKingArt Жыл бұрын

glad you like my videos!

@cat9595 Жыл бұрын

Sir one video on baby trex with modeling and rigging 🙏❤️

@thewave5536 Жыл бұрын

Epic

@RyanKingArt Жыл бұрын

glad you like it 👍‍

@PIY.456 9 ай бұрын

You can use multiresolution instead of subvision for great performance while sculpting

@Paul_nutfrom80s Ай бұрын

thank you, fortunately, areas masked in sculpt mode remain that way switching to texture painting

@mosspath2974 Жыл бұрын

This at least makes me a little less overwhelmed, thank you. Trying to resculpt an old Gamecube model to use as a 3D Print. I wanted to sculpt some of the details that were originally made through texturing, but I've been struggling like crazy just to get the sculpt tools to do what I want lol Half barely do anything, and tools like Clay, that are supposed to "add on" in fact cave the model inwards. Masking should hopefully help a lot, the only issue is I can't really see what I've masked lol

@davidburns9766 5 ай бұрын

If they’re doing the opposite of what they’re supposed to do, go into edit mode and alt+N and flip normals. That should solve that, or alt+N and either recalculate inside/outside. One of those usually solves the issue for me.

@Rero2022 Жыл бұрын

Nice video

@RyanKingArt Жыл бұрын

thank you!

@abhirutmeherishi5738 Жыл бұрын

awesome! can you cover the mask and facesets menu on the top bar next Please!

@RyanKingArt Жыл бұрын

thanks for the tutorial request 👍‍ 👍‍

@H9_zy Ай бұрын

how do you clear out the mask after your done sculpting the specific area?

@Bangla.in1 Ай бұрын

Fantastic ...thanks from india

@rafvanraevels Жыл бұрын

Good tutorial, Ryan. Could you do something on geometry nodes? It still remains a bit of a mystery for me and the posibilities are imens.

@RyanKingArt Жыл бұрын

thanks for the tutorial request. I will consider it. 👍‍

@rocthered 10 ай бұрын

Can you hide masked region in sculpt mode? Somehow I find they said there is a hide_mask menu, but I can't find it..

@mr.lunatic3157 Жыл бұрын

🤩🤩

@RyanKingArt Жыл бұрын

👍‍ 👍‍

@mr.lunatic3157 Жыл бұрын

Had to come back 😂 my memory is 🤦‍♂️

@eldarreshitov6109 Жыл бұрын

make a lesson about hard surface and the correct topology, thanks! 👍

@RyanKingArt Жыл бұрын

thanks for the tutorial requests 👍

@Music-tp4mh Жыл бұрын

How to hide area masking

@randallwhiteis Ай бұрын

I must have clicked something and now i can't use mask at all in a file of mine. It just doesn't do anything. Any idea how to enable it again?! I'm going to have to make a new file and import all the stuff to that If I can't get this fixed.

@amod9935 10 ай бұрын

Im not able to see mask black color on my sculpt any solution?

@Thanos-uw6rw Жыл бұрын

Tf clay strip are not working in 3.6 version

@KeanusReal Жыл бұрын

hi, is there a way to rotate mesh after masking certain area? such as a cat ears. i want to just rotate but it's too high poly so i want to rotate just ear part with rotation of sculpting mode. but can't! Zbrush just can do. but blender i don't know how..plz help

@davidburns9766 5 ай бұрын

Rotate tool is on the menu of brushes near the pose brush on the left and there’s the rotate button near the bottom too.

@chrisbrimacombe 10 ай бұрын

When I use the Mask tool to paint, nothing shows up. The Mask Overlay is turned on. It's the same with Subdivision Surface applied or not. ... Upgraded from 3.2.1 to 3.6.2 and that fixed it. Bug in the system.

@soso-ph9bl 6 ай бұрын

I tried using mask but it doesn't show the brush marks that yours does.

@harikeshprajapati4043 Жыл бұрын

Video series on geometry nodes..🙏

@RyanKingArt Жыл бұрын

thanks for the tutorial request. I will consider it. 👍‍

@digitalAuge 16 күн бұрын

hey it's me again 😅I'm desperate about something small again and am searching like crazy on Google. I thought there was a function to make the masked area invisible so that i can see inside the body. Or am I stupid and that's not possible with the mask, and another mode/funktion? 🙈 Thanks. And great Tutorial as Always 👌

@digitalAuge 16 күн бұрын

lol i found it "Draw Face Sets" + "H" for hide 😅