How to Use Conventional Spray-gun Systems

No video

How to Use Conventional Spray-gun Systems

Рет қаралды 606,656

PaintersInstitute

Күн бұрын

Пікірлер: 47

@terrymartin3224 9 жыл бұрын

This video is very informative for the novice painter. I've been a sprayer for over 40 years and I give this vid the thumbs up.

@earlcathcart4783 4 жыл бұрын

I'm a professional painter and this is very informative for new sprayers...

@terrymartin3224 4 жыл бұрын

@@earlcathcart4783 Do you own a Binks 630?

@jeremywaterer3459 6 ай бұрын

I'm a first timer. That was an awesome - to the point video without any superfluous B/S (except your racey music 😂), like you get in a US video. You must be a good Kiwi bloke! I appreciate it. Thanks. JJ

@jonlejune2977 3 жыл бұрын

Thank you never hurts to see how someone else does it.

@Ikhsanbudiyanto0 Жыл бұрын

Good tutorials for spray painting

@10000Rachel 4 жыл бұрын

Thank you!

@bleedingsoul47 9 жыл бұрын

Thanks for the very informative video I work for a fabrication company and switch from being an industrial grinder to a painter and have no past experience very appreciative of the video it will help a lot would like to see more

@mikefukano900 7 жыл бұрын

casey coggins

@Uzzal822 3 жыл бұрын

very nice spray painting

@ulsterprodspb 3 жыл бұрын

First guy in about 20 videos who knows his job thank you

@nashprithvraj3527 5 жыл бұрын

Hi THANK YOU for your information very helpful

@kurtinklern3262 Жыл бұрын

No pot liner? No desire to know atomization psi with a regulator?

@yassermimouni1552 9 жыл бұрын

thanks very helpful

@Bab_RZK 3 жыл бұрын

It is a beautiful idea

@lennycruz4558 5 жыл бұрын

Very good tutorial for a noob hobbyist like me

@eskweldingfabrications2843 10 жыл бұрын

Thank you for a very informative video

@rblum1862 8 жыл бұрын

thank you thank you thankyou...very informative...thank you

@jskind 9 жыл бұрын

Thanks for this, the kit i got from supercheap auto's had no instructions, and your demoing the same kit with a different brand name.

@freebusinees5668 2 жыл бұрын

HV & HP & LV concerned air or paint? Thanks 😊brother

@Kimchiboy08 5 жыл бұрын

Would doing a vertical first pass instead of horizontal first pass help avoid sagging more?

@aslamshaik8911 3 жыл бұрын

Please tell me how is best spray gun point 1.4 mm 1.7mm

@freebusinees5668 2 жыл бұрын

HV & HP & LV concerned air or paint?

@stevegeary8802 6 жыл бұрын

why not just put the tin inside the pot when its empty no cleaning required

@mirratag8604 4 жыл бұрын

Greco kink xtreme 45?

@davexb6595 8 жыл бұрын

I have a new compressor and spray gun (low pressure pot). I haven't painted with an air compressor before. I bought this setup to paint the interior of my house. I don't think I can find a low sheen oil based paint for the ceiling or walls. Do I try with a water based paint or just find the lowest sheen oil based paint I can?

@carlcox7332 4 жыл бұрын

Why would you ever paint the interior of your house with oil based paint? The only thing I would ever consider painting with oilbased would be cabinets doors or possibly trim. But even those examples there are some amazing water based paints out there. Its a bad idea for a lot of reasons but just a few off the top of my head are, if the paint is latex originally it will cause the oil based to crack as it cures. Oil doesnt have the flexibility that latex does and the paint under will flex and contract with temperature changes. Another reason is it would be extremely difficult to ventillate your entire house cause the fumes are extremely toxic, not to mention flammable if there is a spark caused by your compressor or even static build up from the paint going through the hose. You can spray water based through these but you need to run an additive like floetrol in the paint to keep it from clogging the tip constantly. Latex dries really fast from the air pushing it through. Airless sprayers work so much better because there is no air. The actual paint is pushed under extremely high pressures like around 2200 psi

@carlcox7332 4 жыл бұрын

Also you would constantly be having to refill one of these and to prevent banding or halo you need to keep a wet edge. The dry time while your refilling would cause lap marks everywhere you stopped to refill

@carlcox7332 4 жыл бұрын

Not trying to come off as a prick. I paint houses for a living and ive learned some of these lessons the hard way. "Paint life tv" channel on youtube has some really great tips for house painting