How to use lateral tension to repair dents with the new Keco LTT Beams

How to use lateral tension to repair dents with the new Keco LTT Beams | GPR and dent repair tools

Рет қаралды 25,426

8 ай бұрын

The new Keco LLT Beams (Lateral Tension Tools) are here!
We’ve got our hands on a set and put them straight to use on this pretty sizeable damage on a lower bodyline on a Volkswagen Polo.
This is the perfect job to use lateral tension, it’s got heavy bodyline damage, large crowns, seam damage, it’s pulled the panel edge in and it could be stretched!
In the video you’ll see how we set up the tools, where to place them and we went through the repair step by step.
Using the Keco 6 C process, watch how we use lateral tension to speed up what would be a lengthy and difficult paintless dent repair without it, all with a 100% glue pull repair.
Please let us know what you think of the new tools!
Graham
Dent Detail PDR
------------------------
The tools are available at -
kecotabs.co.uk/
and
www.kecotabs.com/
------------------------
All music under license from Epidemic Sounds
Find out how we can help you with our paintless dent repairs in Lancashire, Greater Manchester and the north west, United Kingdom at dentdetailpdr.com/
#tools #dentrepairtools #dentremovaltools
#howto #howtogluepull
#gluepullrepair
#gluepullrepairvideo
#howtopdr
#paintlessdentrepair
#volkswagenrepair
#dentdetailpdr
#dentrepairuk
#leyland
#lancashire #bodyshop
#bodyshoprepair
#carbodyrepair #keco #kecouk #kecotools #manchesterdentrepair #howtorepairdents #bigdentrepair #howtofixbigdents

Пікірлер: 42

@EnviroDouglas 8 күн бұрын

Best video around, including manufacturer’s video. You’re a great tech, too! Taking your time to get it right is a true craftsman.

@dentdetailpdr 8 күн бұрын

Hi thank you for watching and for the kind comment

@1st_track_dents 8 ай бұрын

Great explainer video Graham, loved the sound of that pop when the tension was released! 👍

@dentdetailpdr 8 ай бұрын

Thanks Jake much appreciated! Ha yes it was a satisfying one, it made me jump as I wasn’t expecting it haha

@dentremover01 8 ай бұрын

Nice repair Graham

@dentdetailpdr 8 ай бұрын

Thank you Martin 👍

@franciscoramos226 8 ай бұрын

Great masterclass Graham! 👌🤩

@dentdetailpdr 8 ай бұрын

Hi Francisco thanks for the kind words, hope your well!

@MahmoudSahraei 7 ай бұрын

Very good ❤

@dentdetailpdr 7 ай бұрын

Thank you, and thank you for watching

@nickmorgan3707 6 ай бұрын

Class brother

@dentdetailpdr 6 ай бұрын

Hi Nick thank you and thanks for watching

@user-hh7cu6wt6b 6 ай бұрын

Не понимаю чему тут восхищаться , даже на видео видно что там все бликует, если это для вас уровень тогда вам надо приехать в Россию и посмотреть как делают настоящие профессионалы.

@dentdetailpdr 6 ай бұрын

Thanks for watching

@artcarmartelinho 2 ай бұрын

Parabéns pelo vídeo 👏🏻👏🏻 Comprei uma ferramenta dessas e e esse vídeo me ajudou bastante

@dentdetailpdr 2 ай бұрын

Not a problem thank you for watching, I hope it helps

@JB-hj8fd Ай бұрын

Nice work,what light and lens are you using? Did you make the light stand?

@dentdetailpdr Ай бұрын

Thank you for watching. The light is from Elimadent, and stand is DNE

@marceloagnello9124 8 ай бұрын

Congratulations, great work. I hope to have these tools here in Brazil.

@dentdetailpdr 8 ай бұрын

Thank you Marcelo, you can order from the Keco US site and they can ship them to you

@andyrazzell1080 3 ай бұрын

Great videos mate and always well explained, Is the collision glue your go to for most stuff

@dentdetailpdr 3 ай бұрын

Hi Andy thank you for watching. Yes I use the Cam Auto Collision glue for every glue pull repair, no matter the size of the repair 👍

@colefrye9425 6 ай бұрын

Great repair! What do you have to attach your light to that light stand? Thanks so much!

@dentdetailpdr 6 ай бұрын

Thanks for watching! It’s called a Medusa adapter, you can get them form Elimadent or Anson

@dananhood762 7 ай бұрын

Nice work !. Was this a full glue pull repair ? Or did you have to get a tool to the backside of it to finish it off ?

@dentdetailpdr 7 ай бұрын

Hi Dan, no the whole job from start to finish was an all glue repair

@Sworkma2 5 ай бұрын

What blending hammer are you using in this video? It seems to have some weight to it.

@dentdetailpdr 5 ай бұрын

Hi thanks for watching, it’s the Shane Jacks blending hammer, with the VIP leather tip. It has added hammer weights on from Edgy Tools

@haronspdrtools6225 3 ай бұрын

This damage does not require installing two tow supports. This repair only required one support. Thanks

@dentdetailpdr 3 ай бұрын

That’s great thanks for watching

@allenwilson6585 5 ай бұрын

The left LTT beam has zero net effect on the pull. You did not need it at all. Now if you put that across the gap, then you have a viable pull where you stabilized the left side of the door. . Your whole pull was based on the right side only, It came out ok though because there was enough movement on the right side of the door. Good advertisement for KECO, hope they paid you.

@dentdetailpdr 5 ай бұрын

I can assure you it did, how can you even say it had no effect without being there or working that dent in person? Absurd comment

@allenwilson6585 5 ай бұрын

@@dentdetailpdr obviously you never heard of newtons 3 laws. that left beam is doing nothing at all. absurd use of tension

@dentdetailpdr 5 ай бұрын

@@allenwilson6585 stick to your PDR beginners group Allen, for someone who never shows his own work you have a lot to say. Thanks for watching

@jasonj4326 5 ай бұрын

the beam on the left was pulling against itself because it's attached to the same panel you're trying to pull away from however the one on the right was pulling using the front door as the stable point of contact. That's what he was referring to. You could have attached it to the quarter panel dogleg as a stabilizer point, though @@dentdetailpdr

@dentdetailpdr 5 ай бұрын

@@jasonj4326 yes that could of been done, and I have done both of the options many times, but to say that it was having no affect at all in his first comment was completely untrue. There’s so many uses out there for a single beam pulling or pushing against itself that has a massive affect, for example 1 beam being used to stabilise an oil canning dent. Maybe he worded it wrong, but for him to say it wasn’t having any affect was untrue and his choice of sarcastic wording and pettiness was completely uncalled for