How to Use Machine Simulation in Autodesk Fusion
Рет қаралды 6,970
Күн бұрынProgramming a part in any CAM software can be a disconnected process between what the toolpath looks like on screen, and watching it run on a live machine. Autodesk Fusion gives you the ability to watch the toolpaths you've programmed as they drive a model of your machine. Machine simulation can help you avoid mistakes and make better programs.
Simulation of your toolpaths on your machine tool is so helpful, once you see it work, you won't want to program without it. This Autodesk Fusion KZfaq video will show how to simulate using one of the machines from the Fusion library.
Get an introduction to Machine Builder with our previous video: • Learn How Machine Buil...
Learn to configure a post processor for machine simulation in Fusion:
autode.sk/4a5jvOU
Time Stamps:
00:00 - How to Use Machine Simulation in Autodesk Fusion
01:25 - How to Select Machine from Setup Dialog
03:41 - How to Position a Part on Machine
04:25 - How to Simulate Toolpaths
►FREE TRIAL | autode.sk/3Wtfi20
►SUBSCRIBE | autode.sk/30njGGX
►GET STARTED | autode.sk/30k2DWh
►TRY AN EXTENSION | autode.sk/3EOUidW
CONNECT with Fusion on social media:
INSTAGRAM | autode.sk/2Enzh8P
TWITTER | autode.sk/45cIYTK
LINKEDIN | autode.sk/3UyieZS
FACEBOOK | autode.sk/3WaaZLb
@nathansinclair868 3 ай бұрын
Are there any turning machines in the libary?
@mattiasarvidsson8522 3 ай бұрын
u cant make vdi or bmt-holders and put them on a revolver in this software
@kazoku7827 3 ай бұрын
The Tool Library could be further advanced. There is no need for scripts to create a tool holder to carry out simulations, more detail in the tool holder simulations, being able to choose the driven tool holder for Lathe, more power of choice when creating a lathe tool. In the Drills section in the speed and feed category, you can save the default peck. Being able to create subcategories for feed and speed of different machines. Dark Mode example: Mazak: VC..., Fz... dmg: VC..., fz..
@manufacturaespecializada7051 3 ай бұрын
Turning machine simulation?
@donggukpak 3 ай бұрын
Why aren't there Fanuc Robodrills and Brother Speedios in the library? They are reasonably common machines in the industry.
@mattiasarvidsson8522 3 ай бұрын
would make no sense to use high end machines with budget cam software
@Te4mUp 3 ай бұрын
Buggier than wine programs ran on a hackintosh with an AMD GPU and without the correct plist files.
@gkoornhof 3 ай бұрын
Day 126 of asking for Dark Mode in Fusion
@robert_arrow 3 ай бұрын
Day 7652 of asking Autodesk for machine simulation for Turn and Mill/Turn machines :))
@CraigHollabaugh 3 ай бұрын
Still going huh, keep up the good requesting!
@Muny 3 ай бұрын
Great video but the dialogue was hard to understand
@martinsmith2948 2 ай бұрын
Day 127 of asking for DARK MODE
Cool Items Official
Рет қаралды 27 МЛН
Fabiosa Best Lifehacks
Рет қаралды 4,1 МЛН
Autodesk Fusion
Рет қаралды 20 М.
Autodesk Fusion
Рет қаралды 24 М.
Brother-live_mob
Рет қаралды 1,3 МЛН
MaviGadget
Рет қаралды 1,6 МЛН
ProTech
Рет қаралды 88 М.
😍 Таких шикарных и гибких телевизоров, тем более за такую копеечную цену вы больше нигде не найдете.
Любимый WB
Рет қаралды 3,3 МЛН