The water measured at 1593 Which Is Not good. The meter DID NOT read 1.5; it read 1593 (One thousand Five Hundred Ninety Three)ppm. Which is insanely high. Regular tap water should not be that high, nor will regular tap water read 1.5 (One point Five) that's insanely low and usually requires a reverse osmosis water filtration system. Tap water should be around 80ppm - 300ppm; is low but possible, my tap water is around 180-ppm200ppm. My Reverse Osmosis Filtration Water is at about 20ppm. Your device needs some recalibration

thanks for the video, I think you should not dip it over the immersion line. See the manual.

Do you know how to caludrate this exact PPM metre? I have the same one but I don't know how to calibrate it

Thank you much for your very informative information I just purchased one from Amazon, the same one.

That was cool. Thank you 🙏🏾.

Salam, So TDS, total dissolved solids, output is in PPM? And EC is a an extra feature of the device, Electric Conductivity? Chokran

First of all, I would like to thank you for your videos.I have a question? I bought one from aliexpress and i did not find its battery.where can i find it?

What an amazing demonstration

So if my Tap water is 0067 ppm & EC IS 0124 RAIN water is PPM 0074 EC 0149 There's neally double mine. what does that mean

What kinda battery does it take?

Μy tap water is 0163 and the EC shows 0326. You are probably confusing the water glasses; that can't be right.

Mines is not reading it just stays on 0 and the green light stays on

What is the chart for EC range of fruit trees?

How can 1593 ppm be clean.. anything above 200 ain’t good for human consumption

Great video

Thank you

How do you clean the electrodes after each use?

thanks a lot for sharing this

sorry I dont understand why it showed 1593 in a Tap Water and you said it is just over 1.5 and it is good? :( meanwhile in the list it gives different figure My fish tank water shows up between 400 to 750 ppm. Do you think it is okay ? I have tried tap water (that everyone can drink straightaway) and it still show around 300 . I am in London so I believe water quality is good but dont know why it show 300 to 350ppm

Understandable explanation, thank you.

What's small number in below LCD with C" mean ?

fantastic; cheers

please get rid of the annoying background music. Just tell about the device etc. Cannot concentrate with all the noise going on. Thanks

ممتاز شكرا

okay i have the same tester .. my water reading is 0006 ... does that mean its 6 parts per million

Great video. Very informative. Keep it up!

Thank you!

Rain water that high wow here in mru its bet 0 to 0035 ms/cm. tap water is 0078 ms/cm

👍👍

Sorry, but, you mentioned a couple of times that the water was good quality. This could be false since the meter you are using does not prove the quality of water is good. A TDS/EC meter is not for testing if water quality is good. For example, the rain water could have been contaminated by stuff in the air or by whatever collected the rain water. The contamination could be something that is not dissolved in water, therefore, the meter would not read it. Although, you may be able to come to a conclusion that the water is of bad quality with a high TDS reading such as the salt water. I just don't want more people being misinformed because there is already a lot of misinformation out there regarding this subject, unfortunately. Here is a video that shows what I'm talking about. kzfaq.info/get/bejne/mpl9dsx3p5rGmXk.html