I just bought one. Thanks Todd for the overview. I get more out of listening and watching someone that is knowlegeable explain the features than I do reading the manual.
@CashThat4U4 ай бұрын
That’s because the instructions are so small that no one can read it!
@stevewiverstad2805Ай бұрын
Great video. Users manual didn't tell me shit. Thanx
@DanBlackRacing7 ай бұрын
I'm usually not fan of too many things coming out of China but this has been a great tool.. I've had it for several years without issue. I've used it on Mitsubishi 3000GT, Nissan cube, Nissan versa, Jeep Wrangler JLU 2018, 2021 RAM warlock and many other vehicles.
@meinasalon2 жыл бұрын
The best explanation video on the Ancel. Thanks. Super appreciated.
@jasonharmon7777 Жыл бұрын
Todd, excellent review of the ODB Ancel scan tool. Cheap awsome, spend a few busks! Know whats wrong quickly before your mechanic knows.. dont tell mechanic - I love it.
@charliecox4795 ай бұрын
I just ordered mine off Amazon for $36. It was on sale. I’m hoping this will help. It’s warming up. I got a few cars I need to work on, so yeah I’m looking forward to using this little device. Thanks for sharing information on this OBD code reader
@realityfitnessfyt4lyfe2487 ай бұрын
Thanks for taking the time. Greatly appreciate it.
@austinhalpin52822 жыл бұрын
"make sure you thoroughly read through this manual" ...I'm watching this specifically to avoid reading the manual.
@robertwheatley41953 ай бұрын
Great video, watched it twice and connected to 2014 jeep Cherokee sport. Gave me a PO522 code that led to replacing engine oil sensor switch. Thanks
@shultzy10802 жыл бұрын
Thanks man for the run through, I really appreciate it.
@HeartSoulLeake2 жыл бұрын
Thank you. I just got the AD410. This video is encouraging to hear all that it can do.
@ToddsGarage2 жыл бұрын
Thanks for watching, I appriciate it!
@HeartSoulLeake2 жыл бұрын
@@ToddsGarage used it. And was quite empressed
@hfarve2 жыл бұрын
Thanks for taking the time to explain how to use this reader, very informative. Can you possibly do a video on updating the firmware?
@ToddsGarage2 жыл бұрын
Hi and thanks for watching! I'll add making a video about a firmware update to my list and hopefully can make in the future. Thanks again for watching!
@StephenBolger Жыл бұрын
Great info. Just purchased this scanner and this video helped.
@Ian-df8fu5 ай бұрын
This is very helpful. Thanks
@jameswhite1319 Жыл бұрын
Have you updated this model??? Does it work better after the update! Thanks for sharing
@RussellBettsgogov2 жыл бұрын
Can I use it while the engine is running? Will it show me more information if the engine is running?
@captainquint252 ай бұрын
Very informative, many thanks.
@Ps51bx2 ай бұрын
Great overview, thank you sir.
@theSaxman5 Жыл бұрын
I bought this reader and it was very easy to read and gave me information on the go and let me know if It's something I should fix before continuing my drive or okay to travel on until I can fix the problem. Loved this unit, then someone stole it out of my truck and only a few so called friends knew where I stored it. Yep, I know who I can trust now, no longer a friend. He can fix his own junk now.
@daniellivingston87592 жыл бұрын
Excellent video! Thank you!
@princeclive19133 жыл бұрын
You are a good teacher you teach things in a cool manner and step by step in so easy to follow keep it up brother MAY GOD BLESS YOU AND YOUR FAMILY AND YOUR BUSINESS AMEN AND AMEN..thanks brother
@sniper155 Жыл бұрын
Hey Todd! Thank you so much buddy. Well discussed. 👏
@gloriareed93042 жыл бұрын
Very helpful. Thank you.
@ToddsGarage2 жыл бұрын
Thanks for watching, I am glad the video was helpful!
@anthonystallworth47410 ай бұрын
Dude thank you for the review haha, I just bought a new car, but my old one I'm still using for the moment just got a code that says my catalytic converter is faulty & the absorption efficiency is below threshold bank 1 😮💨🤦🏾♂️
@gabrielkishinevski14732 жыл бұрын
This is helpful. Thank you
@ToddsGarage2 жыл бұрын
Thanks for watching!
@artsoto54594 ай бұрын
Great video, would you know why I keep going to I/M readiness screen, I see a lot of green, every time I hit any button it takes me to about IM, I am not getting what you are getting on screen
@CikaMile29 күн бұрын
I have one of these, I have an abs light on and traction control but this gadget says I have no codes
@Gretzky28573 ай бұрын
Does this read transmission fluid temperature?
@ochicoloto3524 Жыл бұрын
Nice content. Can it detect a problem if the warning light has been previously disabled?
@noahway132 жыл бұрын
At 7:25 it shows Readiness supported =6 and Readiness complete =5, which confirmed what he said earlier about one of his systems needs more time to digest info.
@ToddsGarage2 жыл бұрын
Thanks for watching, I appreciate it!
@megabaneen80574 ай бұрын
EXCELLENT THANKS
@arnoldramos392 жыл бұрын
Great informative video thanks
@ToddsGarage2 жыл бұрын
Thanks for watching, I'm glad you liked it!
@Ru4444 Жыл бұрын
Can u please explain how to use the o2 sensor tester please? Thank u
@thevanster80845 ай бұрын
Thank you 🙏
@musiceditor7083 Жыл бұрын
Can this help you turn off the check engine/ service/ oil lights?? Notice there's an option to erase codes, but curious whether that extends to service etc. Great review!! :)
@williamrasengan7 ай бұрын
Can you use this one to calibrate the tire circumference on ford vehicles?
@leol19892 жыл бұрын
Does it matter which protocol is used?
@bobbo11357 Жыл бұрын
Thanks for all the info. I identified the reason for the check engine light coming on…code 0128 - Coolant Thermostat issue
@thejoker3957 ай бұрын
What does it mean when you ign and mil is orange?
@shawnshamgar686411 ай бұрын
Thank you
@moby13882 жыл бұрын
I have a Skoda Fabia MK3. Does this item show the radio code stored on the car computer? Thanks.
@aneelshaman6809 Жыл бұрын
Is it possible to read an ABS system wz Ancel AD410 SCANNER ?
@Thegabrielstyless3 жыл бұрын
Thanks
@ToddsGarage3 жыл бұрын
Thanks for watching!
@jjmax3400 Жыл бұрын
Will this scanner read misfires?
@pawbb6106Ай бұрын
thanks so much .!!
@AdamBuqai3 жыл бұрын
great review and gothrough!! does it remove check engine light on the dashboard?
@ToddsGarage3 жыл бұрын
Hi Adam, thanks for watching! Yes it can erase the trouble codes in your vehicles computer which will turn off the check engine light. However if the core issue isn't resolved the check engine light will most likely come back on within a few drives. Have a good weekend!
@dougjstl12 жыл бұрын
Yes
@cesarrodriguez76225 ай бұрын
What about friend, a question, this one is also used to erase codes or only to detect them. Thanks
@charliecox4795 ай бұрын
It will erase codes
@ItsLexrr Жыл бұрын
I have a question, the car has to be in the “on” position but what about if you have a car with “start/stop” button
@waveriderz2687 Жыл бұрын
Manual says connect with key off and then to turn the ignition on or start the engine.
@RussellBettsgogov2 жыл бұрын
Not a well written manual so hoping you show us.
@jimb51132 жыл бұрын
Connect with key off? Then turn key to on position, not starting motor?
@ToddsGarage2 жыл бұрын
Hi thanks for watching, yes connect the OBD2 Code Reader with the car off, then turn your car to the on position but no need to start the car up for most of the features.
@josephreyes23562 жыл бұрын
How do we see erased codes?
@TomBleecker10 ай бұрын
Do I have to wear gloves to use my unit?
@johnb40245 ай бұрын
No but if you're going to touch your buddies unit, you should be wearing gloves
@samuelantoniolopezrapalo55703 жыл бұрын
Great info..
@ToddsGarage3 жыл бұрын
Thanks for watching!
@steveschwan93267 ай бұрын
I kept hearing Collin Robinson
@christianbaez12802 жыл бұрын
Does this read ABS & SRS?
@Dragoslav_MD Жыл бұрын
No, just DTC codes and realtime data.
@jaiveerbajwa9282 жыл бұрын
Will this work on a 2011 Toyota Tacoma?
@ToddsGarage2 жыл бұрын
Hi and thanks for watching! It should, just verify your vehicle has an OBD2 port. You could verify with Ancel before you buy to know for sure. Thanks again for watching!
@big6red3892 жыл бұрын
How exactly does the on board monitoring work or how do you read it can find anythin on what it mean all i know is my truck shows test#2 Component#11 Fail Also a number 21 under that same test number as fail but it also has two passes with those same numbers to
@ToddsGarage2 жыл бұрын
Thanks for watching. Did you hook the code reader up to your OBD2 port? Did it give you a trouble code?
@big6red3892 жыл бұрын
@@ToddsGarage yeah i hooked it up no trouble codes but when i go to on board monorting it says Test#2 you click that itlls go to a list that says Component#11 and #21 are what say fail but not any other info but min and max with some numbers and the book says hardly nothing about on board monitoring cant find anything on the Internet either
@julianarodriguez36352 жыл бұрын
Can you use this scanner in the Philippines 🇵🇭 let me know thanks
@ToddsGarage2 жыл бұрын
Hi and thanks for watching. I am not sure if this will work on your vehicle or not. Do you know if your vehicle has an OBD2 port?
@newmillenniuminvestments2 жыл бұрын
Do You know if work with japanese Subaru Impreza 2006???
@ToddsGarage2 жыл бұрын
Hi Alfonso and thank you for watching. I am not sure, does your car have an OBD2 port?
@newmillenniuminvestments2 жыл бұрын
@@ToddsGarage yes, it has. But o have a Bluetooth konnwei scaner and it dosn't work...
@ToddsGarage2 жыл бұрын
@@newmillenniuminvestments HI Alfonso, I'm not sure then if you already have an OBD2 scanner that isn't working. Sorry I can't be more help. Thanks again for watching and good luck!
@dawidtram936 Жыл бұрын
@@ToddsGaragehello could you please tell me is there any option for fuel injectors?
@dougjstl12 жыл бұрын
Why can't you show us a little bit more like the oxygen sensor the O2 sensor you can show us a graph of that and a good or a bad one and then you can store some of the sensor data about the fuel trim that's a good one explain that to us a little bit show us a little bit of a graph
@ToddsGarage2 жыл бұрын
Thanks for watching, I will add that suggestion to my list of videos to make. I appreciate your feedback.
@gregsz1ful8 ай бұрын
So Unintuitive meter. My old meter is so easy. I hate menu's. Im here to figure out.
@_wallnutz_ Жыл бұрын
I couldn't get past the opening of the plastic cover. Thanks for showing how it's done.
@jdmforever55832 жыл бұрын
Seriously rubber gloves to use a scan tool😂
@ericbc7 Жыл бұрын
pretty good video but if I wanted to read the manual i wouldn't be her watching you.
@i.a.o.29092 жыл бұрын
If the author: (a) does NOT know what the mini-USB port for, (b) tells the viewers to read the manual; and (c) says, "We'll figure that out," then such statements leave me no room but to ask a question: "Does the author possess sufficient content knowledge on the device the author reviews?
@jeffreysharp9722 Жыл бұрын
knob
@KrGsMrNKusinagi0 Жыл бұрын
took my car to autozone to check the IM readiness they said they couldnt i sit there and looked at their scanner and it had it on there as an option.. i was like seriously.. then he proceeded to tell me my car had 4 fault codes i never even heard of related to brake switch/ecm/etc/abs.... funny the dealership just had my car and the inspection place just had it.. there were no codes etc in the system brakes abs work fine.. also the guy plugged it in then started the car i thought you werent supposed to start the car..