How to use the Behringer Wing and the Behriinger X32 at the Same Time

Рет қаралды 13,521

Күн бұрын

The Behringer Wing and the Behringer X32 use AES50 and can use the same digital stage box! Also, you can use inputs and outputs from either console. In this video I show you how to set up the Behringer Wing at FOH and the Behringer X32 at Monitors or Broadcast.
The routing on the Behringer Wing makes this type of setup really simple and powerful!
Learn more about my X32 Fundamentals course at: course.drewbrashler.com.
Check out Waves SuperRack Performer: www.waves.com/mixers-racks/su...
Products shown in this video:
Behringer X32: sweetwater.sjv.io/g1RvM9
Behringer Wing: sweetwater.sjv.io/m5R56X
Chapters:
00:00 Intro
00:34 AES50 Connections
01:44 Setting Clock Source as Internal on Wing
02:23 X32 Settings for Clock Source
03:10 Routing On the Behringer Wing
06:25 Sending Talkback and Using X32 for Outputs
08:37 Routing on the Behringer X32
10:59 Testing
11:21 Adding in a 3rd Console!
12:14 Behringer Wing vs. Behringer X32 Channel Count
12:47 Conclusion

Пікірлер: 38

@ErnestDotPro Жыл бұрын

It's like you visited our church and made a video on our setup. This is exactly the information needed to help us get our new monitor setup working. Thank you!

@DrewBrashler Жыл бұрын

Love it!! I'm glad it was what you guys needed!

@Gladingson1 Жыл бұрын

WOW...AM REALLY AMAZED DREW

@leandrosilva6414 Жыл бұрын

This is very interesting! Thanks Drew!

@omrikladar-benstine819 Жыл бұрын

Great video! I'm salivating at the thought of buying a WING for my band's PA, we already run an X32 Rack, but with the addition of the WING we could have a dedicated FOH console and the X32 driving monitors (IEM's in our case)

@DrewBrashler Жыл бұрын

It would be a nice upgrade! The Wing has a lot of things I wish the X32 had. If I was mixing FOH, I would prefer the Wing over the X32 if possible.

@kennysiddons1273 Жыл бұрын

Really helpful! I currently run an Wing at FOH and a X32 Rack for monitors. We have an X32 that we are not using so I have been debating on the ability to set it up as a separate broadcast mix and this will help a ton. I do have one question though, could I use the X32 inputs as a way to have more local in's for my wing?

@manuelwalker811 Жыл бұрын

Thanks for your video! If you look at the cable management, it would make more sense to go from the stagebox first in the X32 and then in the Wing. So you would have only one CAT cable between stage and FoH. Would it still be possible in this setup that the Wing is still gain master? Thanks for your answer!

@DrPhillEntertainmentja Жыл бұрын

@Drew Brashler is it possible to connect an X32 to a stage box with a network switch between both or it must be a straight wire between both??

@johnbubchongjohn4318 2 ай бұрын

Thank you for this video Drew. I need to know, in a setup where you have two DL32’s and you need to connect an x32 on stage to a wing at FOH, how do you get all 48 channels to your x32 on stage if all your inputs are coming from the AES50 A port.

@Account7362514 Жыл бұрын

Hey Drew my church is getting set up almost exactly like this video. So thank you. You mentioned commenting on videos that would be helpful. When you use Smaart at FOH in mixing or measurements, do you use the wing or X32 as the interface? If you have related content already I could not locate it. Thanks for all your doing!

@douglasgormley9724 10 ай бұрын

Hi drew. Love your videos. I followed your instructions and things are working great. My question is…. Is the signal to my M32 going to a clean, unaffected signal or will the fx provided, per channel on the Wing, pull through?

@isaacsitiakalaabwenje Жыл бұрын

Thanks this a new lesson for me to learn.... My only question is You are using these mixers without a Dsnake?

@hunterlee2715 Жыл бұрын

Thank you for making this video. Is there a way to control x32 with you Wing. I’m running sound at a place for a week that has an x32 but I’d like to use my wing. Without disconnecting there x32

@TheWinndizzle 4 ай бұрын

Is there a way to bring stereo left right back from the AES50A of the X32 back to the wing and Route it to a local out on the wing via the same AES50 B (out to x32)

@cyberber4027 Жыл бұрын

Hey Drew i was wondering how do i set up my s32

@mantaskraskauskas9745 Жыл бұрын

Whenever I want to change the eq of an instrument channel (to make it sound different on the master audio) the same changes can be heard on the musician's monitoring system (mix bus). Is there a way that I can eq the instrument's sound for master and monitoring separately? If not, can I somehow manage my sends so that the instrument's eq tweaks don't translate to the mix bus audio? Edit: I'm talking about x32

@nunojorgenjstudio7954 9 ай бұрын

In a situation where there's only an S16 available, how would you use the fisrt 16 inputs on the X32 as a "second stage box"?

@katieluna7715 11 ай бұрын

Thanks for the video, Drew! I have one question. We have a Wing console for FOH and another Wing console for Broadcast. Unfortunately, our Broadcast Wing is downstairs and our Broadcast Computer is, by necessity due to space, upstairs next to our FOH Wing. Is it possible to grab the Broadcast Wing mix output off of Aes50c on the FOH Wing? Similar to what you did with talkback from the X32 to the Wing?

@user-bb3zp3pb3p 4 ай бұрын

5:30 I am using the exact same setup, but i don’t get any automatic trim adjustment on the x32rack when i turn up or down the gain on the wing, why is that?

@ryankruse1855 7 ай бұрын

Will the Talk buttons on the Wing Mute/Unmute the “LCL 8” being sent over AES50? If not, how are you toggling that mute from the Wing?

@MrFolder40 5 ай бұрын

Hey Drew I have 3 SD16 would I be able to use the first 16 outputs for the x32 and the last 8 for wing? I'm still kinda confused on the x32 routing.

@rootzmanllama5592 Жыл бұрын

Where can I find those wall panels

@femimattojo1889 9 ай бұрын

What about output, can they share output as well

@o.ginnovationpro 8 ай бұрын

Hi, got a quick question for you. How can we achieve using 2 x32s, M32s to get up to 64 inputs?

@DanielWilliams152 Жыл бұрын

Hi Drew, great video! I was wondering if when using the Behringer Wing I could use a DL32 in AES-A then a DL32 in AES-B and then a DL16 in AES-C? To me this would make sense as the Wing has 48 stereo sources so I could need 96 inputs? How many outputs can the Wing do using the DL32 and DL16 stageboxes? That is 40 XLR outputs total available, could I run all of those if I wanted to? And the P16 outs could still be used as any of the AES A/B/C - Outputs 33-48? Thanks a lot, Dan :)

@jerry162003 11 ай бұрын

This is the same question I have as well. Is this possible to have a setup this way? I have a S32 and S16 that I would like to pair together and send directly to the Wing. Would I be able to use this setup with the P16 outputs? THanks for any assistance on this question.

@kingofkingschurch2040 Жыл бұрын

Hi Drew, can we use the Waves SuperRack for a stream setup.. so we can use it for autotune?

@DrewBrashler Жыл бұрын

Yes you can!

@ZHDRUMS Жыл бұрын

Drew I have a question about p16 and buses if you could answer pls and thank youuuuu

@jarsec Жыл бұрын

Was this link with Dante?

@oleggolovetsky6385 Жыл бұрын

I like everything about this video but, what if I want to control gain from monitoring desk? That way I can only take one cable running to FOH instead of two. We are mobile church and less cable runs the better.

@DrewBrashler Жыл бұрын

You could, however the benefit of driving it through the Wing is if you were tapping into the FOH inputs or if you had multiple stage boxes. But you could absolutely use an AES50 connection to both consoles off of say a DL32 or an S32.

@rafaeloliveira-vp5lj Жыл бұрын

HI@@DrewBrashler We already have an X32, can I add the Wing to the FOH, and receive the X32 input channels? Thank you, your videos are incredible.

@SSSColorado Жыл бұрын

I'm looking to run a Pair of M32 mixers, one for FOH, one at monitors. I would like to just plug EVERYTHING into the monitor desk. I typically run FOH from a tablet... However, I've got a national act that wants a desk out front. I'd like to just connect the two desks with a Cat6, and quite frankly, just have the FOH control the mains, and have the monitor engineer take care of the monitors. I've connected the desks, to test this out, but the changes made on the FOH desk aren't changing the outputs on the monitor desk. I feel like I've tried everything... Clocks are set correctly, and the desks are recognizing each other... But the monitor desk isn't changing when I make changes on the FOH desk. Also... The channel strip names and colors aren't matching. Shouldn't they match up when you connect these desks together? I basically want the FOH desk to simply act in the same way as a tablet does when I mix out front with a tablet. When I camhange anything from the tablet, it changes on the monitor board as well. Am I don't something wrong... Or do I have a faulty board?